Categories

Best Bevel Gear Installation Tool

DEWALT ATOMIC 20V MAX* Circular Saw, 4-1/2-Inch, Tool Only (DCS571B)

  • Brushless motor of DEWALT circular saw allows you to cut up to 369 linear feet of 3/4-inch OSB using DCB205 battery (sold separately).
  • The cordless circular saw has the removable auxiliary handle for increased control.
  • The compact circular saw has a hang hook for increased convenience.
  • On-board blade key storage for hassle free blade changes.
  • 1-1/2-inch finger trigger allows users to choke-up on tool if necessary for their application.
  • Bevel gear allows users to cut 2x material at 90 degrees with a 4-1/2-inch blade.
  • Electronic blade brake stops blade quickly for safety and productivity.
  • Bevel lever gives user the ability to bevel at 45 degrees to cut 1x dimensional lumber.
Check Stock

SKILSAW SPT78W-01 15-Amp 8-1/4-Inch Aluminum Worm Drive Circular Saw

  • High torque 15 Amp Dual-Field motor designed specifically for relentless power.
  • 60° bevel allows users to complete a wider variety of cuts with bevel stops at 0° and 45°.
  • The anti-snag lower guard provides smooth operation for small cut-off pieces.
  • Precision-machined, durable worm drive gears for longer tool life.
  • Die-cast aluminum motor and gear housings for durability.
Check Stock

uxcell® 90 Degree Shaft Angle Replacement Part Spiral Bevel Helical Gear Set 3pcs

  • Ring Gear Size: 44 x 13mm/1.73'' x 0.51''(Max.D*T).
  • Pinion Gear Size: 19 x 12.5mm/0.75'' x 0.49''(Max.D*T).
Check Stock

Keylights Key Blank Specialty Bagged Sc1 Purple Plastic Head, Yellow Light

  • Ring Gear Size: 46 x 14mm/1.8'' x 0.55''(Max.D*T).
  • Pinion Gear Size: 17 x 12mm/0.67'' x 0.47''(Max.D*T).
Check Stock

Makita 5377MG Magnesium 7-1/4-Inch Hypoid Saw

  • ...th technology is created with a built-in fan and sealed gear housing to ensure 100% oil surface coating for less maintenance.
  • Make quick, one-handed adjustments using large, rubberized levers.
  • Better fit and more control with comfortable rubber grip on handle.
  • Large cutting capacity (2-3/8″” at 90°) and bevel capacity (0°-51.5°) with positive stops at 22.5°and 45°.
  • Settings are easy to read with oversized number and ruler markings.
  • Blade wrench is attached to saw for fast and convenient blade changing.
  • Large bevel capacity with positive stops at 22.5 degrees, 45 degrees, and 51.5 degrees..
  • Oil-bath technology is created with a built-in fan and sealed-gear housing to ensure 100% oil surface coating.
  • High quality, heat treated hypoid steel gears do not prematurely wear like traditional bronze-alloy worm drive gears.
  • Reinforced power cord withstands jobsite abuse.
Check Stock

Bevel Gear 1.5 Modulu 15/30 Teeth, Tapered Bevel Pinion Gear Hole Diameter 90 Degrees Tapered Bevel Motor Driving Metal Gear

  • Multi Sizes Bevel Gears to Choose from: 1M, 1.5M, 2M/ 5-18mm shaft hole, the key specs for this gear- 1:1 ratio, 2 Module, 20 teeth, 12mm shaft hole, M5 fixing hole with 4mm Keyway, 90 degrees steering angle..
  • Widely applied in agricultural equipment, textile machinery, printing machinery, mechanical transmission, automotive and other industries that needs steering drive..
  • The bevel gear is made of 45# steel features high wear-resistance, strong and durable..
  • Note: 1 bevel gear only match 1 same scale gear, so 1 set （2 or more gears) should be replaced together for smoothly drive..
Check Stock

Boston Gear L149Y-G Bevel Gear, 2:1 Ratio, 0.500\ Bore, 16 Pitch, 32 Teeth, 20 Degree Pressure Angle, Straight Bevel, Steel

  • Multi Sizes Bevel Gears to Choose from: 1M, 1.5M, 2M/ 5mm, 6mm, 8mm shaft hole, the key specs for this gear- 1:1 ratio,1 module, 20 teeth, 5mm shaft hole, M5 fixing hole, 90 degrees steering angle..
  • Widely applied in agricultural equipment, textile machinery, printing machinery, mechanical transmission, automotive and other industries that needs steering drive..
  • The bevel gear is made of 45# steel features high wear-resistance, strong and durable..
  • Note: 1 bevel gear only match 1 same scale gear, so 1 set （2 or more gears) should be replaced together for smoothly drive..
Check Stock

Agri-Fab Inc 45-0566 | 50 lb Broadcast Push Spreader, Black

  • Side-Deflect…Integrated media directional control…Build-in side deflector.
  • Enclosed gear box with bevel gears for longer life and smoother rolling.
Check Stock

Jigsaw, TECCPO 6.5 Amp 3000 SPM Jig Saw with Laser, 6 Variable Speed, 6 Blades, ±45° Bevel Cutting, 4 Orbital Settings, Pure Copper Motor, with Carrying Case - TAJS01P

  • ...ariable Speed up to 3000 SPM】6.5 Amp fine copper motor generates strong power and up to 3000 SPM cutting speed for high working efficiency. 6-speed dial enables various cutting speeds for different cutting needs. With 4/5” stroke length, it removes more material per cutting for more efficient cutting..
  • 【±45° Bevel Cutting & 4 Orbital Settings】Adjustable bottom plate can tilt up to 45° to both left and right sides for bevel cutting need. 4 position orbital setting allows you adapt the cutting motion to fit different type of cuts and materials. The higher gear is suitable for softer materials and faster cutting.
  • lower gear for harder materials and slower cutting..
  • 【Multifunction & Tool-Free Blade Change】Equipped with 6 blades separately for cutting different materials, including: wood, PVC, metal, gypsum board, etc. The max cutting capacity is 4” for wood & PVC.
  • 2/5” for metal. Tool-free blade clamp allows for easy and quick blade changing..
  • 【Practical & Safe Design】Built-in laser and scale ruler is designed for precise cutting. Switchable front and rear dust extraction system: the rear dust removal port can connect with vacuum cleaner.
  • the front transparent guard prevents dust from splashing.Soft rubber non-slip handle for more com....
Check Stock

PGFUN 2 Pcs 1.5M 20 Teeth 8/10/12/14/15/16mm Shaft Hole Tapered Bevel Gear 1: 1# 45 Steel 1.5 Module 90 Degree Steering Gear with M5 Fixing Hole (10mm)

  • Multi Sizes Bevel Gears to Choose from: 1M, 1.5M, 2M/ 5-16mm shaft hole, the key specs for this gear- 1:1 ratio,1.5 Module, 20 teeth, 10mm shaft hole, M5 fixing hole, 90 degrees steering angle..
  • Widely applied in agricultural equipment, textile machinery, printing machinery, mechanical transmission, automotive and other industries that needs steering drive..
  • The bevel gear is made of 45# steel features high wear-resistance, strong and durable..
  • Note: 1 bevel gear only match 1 same scale gear, so 1 set （2 or more gears) should be replaced together for smoothly drive..
Check Stock

Compatible with Honda Civic/Acura Integra B & D Series MT 3pcs Billet Aluminum 2-Bolt Engine Mount Kit (Black)

  • [Compatible With] : Engine cam gear lock timing belt installation tool fits for Honda and Acura models featuring Vtec B-series motors including fits for Civic and Integra (all years)..
  • [Perfect Design] : This precision tool makes the job of replacing or setting up your new timing belt as easy as 1,2,3.It's designed for B16a & B18c Variants. Simply set the cam gear lock tool in the center between the two cam gears and you will be able to set your new timing belt with no hassle.This tool has a small window right in the middle of it, so you're able to check the timing marks on the cam gear making the installation a 0% non failure..
  • [Durable Material] : Engine cam gear lock timing belt installation tool is made of billet lightweight 6061-T6 aluminum alloy CNC. This is the strongest and lightest cam gear lock and timing belt installation tool on the market today. It guarantees that it will not break or break under extreme pressure or high temperature, and will not form micro cracks that cause damage. The surface is anodized to completely resist oxidation and corrosion,beautiful luster under light conditions..
Check Stock

DEWALT Jig Saw, Top Handle, 6.5-Amp, Corded (DW331K)

  • ...es per minute for optimal cutting speed for a variety of applications.
  • Keyless, lever-action blade clamp for quick and easy blade changes.
  • All-metal gear case and keyless blade lever enhance tool durability in a professional shop environment.
  • 4-position orbital action provides control of cut quality and speed.
  • Positive bevel detents ensure accuracy at the most common angles 0 degree, 15 degree, 30 degree, and 45 degree.
  • Extra-large rubber grip dampens vibration and provides comfort during prolonged use.
  • Integrated dust blower maintains visibility of cut line.
  • Non-marring plastic shoe cover protects soft or glossy materials from scratches from the shoe.
  • Accepts T-shank blades for optimal holding power and professional results.
  • Powerful 6.5 Amp motor delivers the cutting power for the most demanding materials.
  • variable speed delivers 500 - 3,100 strokes per minute for optimal cutting speed for all applications.
  • Keyless lever-action blade clamp for quick and easy blade changes.
  • 4-position orbital action allows for faster, more aggressive cuts.
  • Innovative flush cutting blade system allows for the completion of flush cuts without up cutting.
Check Stock

Skilsaw 7.25 Inch Corded Magnesium Worm Drive Circular Saw with Diablo Blade

  • Die-cast aluminum motor and gear housings for durability.
  • Precision-machined, durable worm-drive gears for longer tool life.
  • Exclusive 53 degree bevel feature with 7 1/4-inch blade is ideal for angled cuts.
Check Stock