Categories

Best Bevel Gears

Boston Gear L149Y-G Bevel Gear, 2:1 Ratio, 0.500\ Bore, 16 Pitch, 32 Teeth, 20 Degree Pressure Angle, Straight Bevel, Steel

  • Multi Sizes Bevel Gears to Choose from: 1M, 1.5M, 2M/ 5mm, 6mm, 8mm shaft hole, the key specs for this gear- 1:1 ratio,1 module, 20 teeth, 5mm shaft hole, M5 fixing hole, 90 degrees steering angle..
  • Widely applied in agricultural equipment, textile machinery, printing machinery, mechanical transmission, automotive and other industries that needs steering drive..
  • The bevel gear is made of 45# steel features high wear-resistance, strong and durable..
  • Note: 1 bevel gear only match 1 same scale gear, so 1 set （2 or more gears) should be replaced together for smoothly drive..
Check Stock

Makita 5377MG Magnesium 7-1/4-Inch Hypoid Saw

  • ...th technology is created with a built-in fan and sealed gear housing to ensure 100% oil surface coating for less maintenance.
  • Make quick, one-handed adjustments using large, rubberized levers.
  • Better fit and more control with comfortable rubber grip on handle.
  • Large cutting capacity (2-3/8″” at 90°) and bevel capacity (0°-51.5°) with positive stops at 22.5°and 45°.
  • Settings are easy to read with oversized number and ruler markings.
  • Blade wrench is attached to saw for fast and convenient blade changing.
  • Large bevel capacity with positive stops at 22.5 degrees, 45 degrees, and 51.5 degrees..
  • Oil-bath technology is created with a built-in fan and sealed-gear housing to ensure 100% oil surface coating.
  • High quality, heat treated hypoid steel gears do not prematurely wear like traditional bronze-alloy worm drive gears.
  • Reinforced power cord withstands jobsite abuse.
Check Stock

PGFUN 2 Pcs 1.5M 20 Teeth 8/10/12/14/15/16mm Shaft Hole Tapered Bevel Gear 1: 1# 45 Steel 1.5 Module 90 Degree Steering Gear with M5 Fixing Hole (10mm)

  • Multi Sizes Bevel Gears to Choose from: 1M, 1.5M, 2M/ 5-16mm shaft hole, the key specs for this gear- 1:1 ratio,1.5 Module, 20 teeth, 10mm shaft hole, M5 fixing hole, 90 degrees steering angle..
  • Widely applied in agricultural equipment, textile machinery, printing machinery, mechanical transmission, automotive and other industries that needs steering drive..
  • The bevel gear is made of 45# steel features high wear-resistance, strong and durable..
  • Note: 1 bevel gear only match 1 same scale gear, so 1 set （2 or more gears) should be replaced together for smoothly drive..
Check Stock

CNBTR 45 Steel 1.5 Modulus Silver 10mm Hole Diameter Tapered Bevel Gear Wheel 20T Pack of 2

  • [Product Type] Tapered Bevel Gear Wheel, 1.5 Modulus, 20T, 10mm hole diameter, 22mm overall length. Please confirm the correct size before purchasing..
  • [Material] Made of 45 steel material, not easy to wear, durable and lasting performance. This gear is an excellent industrial replacement accessory..
  • [Application] Used widely in conveying, hardware, agricultural equipment, printing machinery, automotive applications, mechanical transmission, etc..
  • The contact between the gears is firm, which ensures the normal operation of the machine and good bearing capacity..
  • Note: 1:1 bevel gear (can only be matched with 1:1, can not be matched with gears with other modules and T numbers)..
Check Stock

CNBTR 45 Steel 1.5 Modulus Silver 8mm Hole Diameter Tapered Bevel Gear Wheel 20T Pack of 2

  • [Product Type] Tapered Bevel Gear Wheel, 1.5 Modulus, 20T, 8mm hole diameter, 22mm overall length, Maximum Outer Diameter: 31.6mm/1.24". Please confirm the correct size before purchasing..
  • [Material] Made of 45 steel material, not easy to wear, durable and lasting performance. This gear is an excellent industrial replacement accessory..
  • [Application] Used widely in conveying, hardware, agricultural equipment, printing machinery, automotive applications, mechanical transmission, etc..
  • The contact between the gears is firm, which ensures the normal operation of the machine and good bearing capacity..
  • Note: 1:1 bevel gear (can only be matched with 1:1, can not be matched with gears with other modules and T numbers)..
Check Stock

Makita 5477NB 15 Amp 7-1/4" Hypoid Saw

  • Efficient hypoid gears deliver more power and greater surface contact than conventional worm drive gears..
  • Powerful 15 AMP motor for increased productivity..
  • Oil bath technology and sealed gear housing for less maintenance..
  • 0º – 51.5º bevel capacity with positive stops at 45º and 51.5º is ideal for truss and rafter cut-outs..
  • High quality, heat treated hypoid gears are engineered for long lasting performance..
Check Stock

Makita XSS02Z-R 18V Cordless LXT Lithium-Ion 6-1/2 in. Circular Saw (Bare Tool) (Renewed)

  • Efficient hypoid gears deliver more power and greater surface contact than conventional worm drive gears..
  • Powerful 15 AMP motor for increased productivity..
  • Oil bath technology and sealed gear housing for less maintenance..
  • 0º - 51.5º bevel capacity with positive stops at 45º and 51.5º is ideal for truss and rafter cut-outs..
  • High quality, heat treated hypoid gears are engineered for long lasting performance..
Check Stock

SKILSAW SPT78W-01 15-Amp 8-1/4-Inch Aluminum Worm Drive Circular Saw

  • High torque 15 Amp Dual-Field motor designed specifically for relentless power.
  • 60° bevel allows users to complete a wider variety of cuts with bevel stops at 0° and 45°.
  • The anti-snag lower guard provides smooth operation for small cut-off pieces.
  • Precision-machined, durable worm drive gears for longer tool life.
  • Die-cast aluminum motor and gear housings for durability.
Check Stock

2Pcs Set Bevel Gear 1.5 Mod 1:2 (15T/30T) 90 ° Pairing Heavy Duty Motor Metal Gear

  • Bevel Gear 1.5 Mod 1:2 (15T/30T) 2Pcs Set.
  • Notice: these bevel gears have no set screw holes, you need to reprocess it by your own if you need..
  • Fast Shipping Guarantee: All parcel will be delivered in 7-15 days.
Check Stock

Makita GA7031Y 7\ Angle Grinder, with AC/DC Switch

  • Powerful 15.0 AMP motor delivers 8,500 RPM for faster material removal.
  • Spiral bevel gears for smoother rotations and a more efficient transfer of energy.
  • Labyrinth construction averts debris from penetrating the motor, bearings and gears for longer tool life.
  • Zig-zag varnish protects the armature coil from Filth and debris for longer motor life.
  • Wire mesh intake covers are engineered to avert debris from entering motor especially when used in close proximity to other grinders.
Check Stock

Yibuy 2 PCS 45# Steel 16 Teeth 1.5 Module 8mm Hole Diameter Bevel Gear Wheel

  • 64 teeth for use with G486Y-P mating bevel gear in 4:1 gear ratio applications.
  • Straight bevel 90 degree mesh transmits mechanical power between perpendicular shafts.
  • Pressure angle of 20 degrees for a lower contact ratio between gears, resulting in higher load capacity than smaller pressure angles.
  • Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability.
  • Unhardened teeth for applications where hardness and strength are not needed to transmit torque and motion.
Check Stock

OSOYOO Omnidirectional Mecanum Wheels Robotic Car Kit for Arduino Coding Students Based on Mega2560 Introduction

  • 【Precision die casting】The bevel gears are made of zinc alloy material by accuracy die casting.
  • 【Strong compatibility】The product can compatible with for FRC and other world robot competitions.
  • 【Good quality and durable】High wear resistance, high strength and high rigidity.
  • 【Easy to replace】Including 2 sets of bevel gear and bearings, convenient to replace.
  • 【Exquisite and reasonable】Fine processing and reasonable design, good accessories for industrial robots.
Check Stock

T159348 Axle Bevel Gear Aftermarket for John Deere Backhoe Sub. No. 4461351022

  • 16 teeth for use with L149Y-G mating bevel gear in 2:1 gear ratio applications.
  • Straight bevel 90 degree mesh transmits mechanical power between perpendicular shafts.
  • Pressure angle of 20 degrees for a lower contact ratio between gears, resulting in higher load capacity than smaller pressure angles.
  • Low carbon steel (0.2 percent carbon) for applications where the hardness and strength of higher levels of carbon are not needed to transmit torque and motion.
  • Unhardened teeth for applications where hardness and strength are not needed to transmit torque and motion.
Check Stock