Best Beverage Pva Film

Hydrographics Film - Blank Water Transfer Printing Film - 12 Pcs A4 Size Blank Water Transfer Printing Film - Blank Water Transfer Film

• Hydrographics Film - Water transfer printing -Cubic Coating -Blank Water Transfer Film.

PVA - PARTALL Film #10 Polyvinyl Alcohol (PVA) Quart

Polytek PolyCoat Sealer & Release Agent (1.5lb)

PARTALL ® Film #10 Polyvinyl Alcohol (PVA) Half Pint

The Super® Jumbo 16' PVA Sponge Mop Set (Mop and 1 Extra Refill)

• The Super Jumbo 16" PVA Sponge Mop Set - World's Largest PVA Mop.
• Includes PVA Mop, Extra PVA Mop Refill, and Telescopic Handle.
• 100% Pure PVA Sponge in Patented Non-Slip Gripper.
• Robust Handle - Used Commercially by Janitors, Veterinarians, and Restaurants.
• Picks Up Pet Hair, Dust, and Liquid Like a Magnet - Doesn't Drip!.

PVA Filament, Water Soluble Support 3D Printer Filament 1.75mm 0.5KG Spool for 3D Printers, Natural

• 【Attention Please】This filament is optimized PVA, which avoids the problems of easy breakage, severe moisture, and difficult storage caused by PVA being too soluble in water. Therefore, this PVA filament is insoluble in water at room temperature, but it will soften at a water temperature of 55-60°C to achieve the purpose of easily removing the support. If you want PVA filament that is completely soluble in water, please do not buy this product. If your main purpose is to remove the support more easily and you don't care whether the PVA completely melts in the water, then this PVA is a better choice..
• 【Water Soluble PVA】Water-soluble Polymer. Not completely dissolved, but softening and layering,then peel off with your hands. It will not Damage Printed Surface. Good Bonding to Various Material Such as PLA. Environmental-friendly and Non-toxic. Ideal for Complex Prints!.
• 【HIGH PERFORMANCE】 With even tight winding, clog-free and bubble-free, always maintain a smooth feeding during printing, effectively reduce unexpected printing interruptions. Enjoy design and bring to life your inventions..

PVA Sponge Mops for Floor Cleaning Squeeze with 60" Long Handle, Self Wringing Mop with 15" Head for Kitchen Bathroom Tiles, Sponge Mops for Floor Cleaning with Wringer DUDTO

• Large size PVA mop – 15" PVA sponge mop Head and 60" Long Handle, Make cleaning easier..
• You need a PVA sponge mop – All floor mops for cleaning will leave a lot of water stains, only the PVA sponge mop can absorb 80-90% of water. You don't worry about falling anymore. It works best on tiles, hardwood floors, marble, and your kitchen and bathroom.For use on wood floors recommended that the Angle between the PVA mop and the ground be less than 45° to reduce friction, and the Angle of 30° is the most energy saving..
• SUPER ABSORBENT – Picks up over 5 times more liquid than a regular mop and locks it in place so it doesn’t drip. Instead of pushing water around like a regular mop, the PVA mop cleans, absorbs and dries all at once. It is especially suitable for kitchen, toilet, bathroom and other tile floors. Every home needed a PVA sponge mop..
• A UNIQUE PHENOMENON – The sponge absorbs water as you mop, so your floors dry in minutes. When not in use, the sponge dries hard so it will not pick up odors or smells like other conventional and sponge mops. When you need to use it again, just soak it in water for a while and it will be restored. Wring out only when the sponge head is completely soft and wet and fully absorbed with water..

The Super® Standard 11' Double Roller PVA Sponge Mop Set (Mop and 1 Extra Refill)

• The Super Standard 11" Double Roller PVA Sponge Mop Set.
• Includes PVA Mop, Extra PVA Mop Refill, and Telescopic Handle.
• 100% Pure PVA Sponge in Patented Non-Slip Gripper.
• Robust Handle - Used Commercially by Janitors, Veterinarians, and Restaurants.
• Picks Up Pet Hair, Dust, and Liquid Like a Magnet - Doesn't Drip!.

3D Printlife E PVA: Enhanced PVA, 1.75mm Natural, Water Soluble Support 3D Printer Filament, Dimensional Accuracy +/- 0.05 mm (500g)

• Enhanced PVA formulation with improved stability for 3D printing.
• Bonds well with PLA, ABS, and PETG with excellent water solubility, even in cold water.
• Much greater thermal stability than standard PVA.
• Perfect support for prints with large overhangs or complex internal geometries.
• Do not exceed a printing temperature of 225˚C or E PVA will crystallize too quickly and will no longer flow and/or dissolve in water..
• Store in a resealable bag with desiccant between 0°C and 30°C, away from UV light, and we recommend the relative humidity stay below 50%..
• Difficulty: Advanced. Please note that all PVA's are very sensitive to moisture and humidity. E PVA comes vacuum sealed but we strongly recommend using a filament dryer before removing from storage after initial use..

New PVA Mop and Bucket with Wringer Set for Floor Cleaning, Super Quick Dry, Hands Free Squeeze Sweeper Sponge Mop with Extra PVA Head (1 Year use) for Hardwood Laminated Tile Floor Mop.

• HANDS-FREE SELF-WRINGING SYSTEM – This mop comes with a bucket that can clean the mop in a second. It also squeezes the mop in a second. When you knock over a lot of water, he can easily recycle the water. This PVA mop can also be used outdoors..
• GREAT PVA SPONGE - The sponge absorbs water as you mop, so your floors dry in minutes. When not in use, the sponge dries hard so it will not pick up odors or smells like other conventional sponge mops. When you need to use it again, just soak it in water for a little while and it will be restored..
• YOU NEED A PVA SPONGE MOP – All mops wet the floor when they are finished, only the PVA sponge mop can soak up all the moisture. You don't worry about falling anymore. It works best on tiles, hardwood floors, marble, and your kitchen and bathroom.For use on wood floors recommended that the Angle between the PVA mop and the ground be less than 45° to reduce friction, and the Angle of 30° is the most energy saving..
• COMPACT FOR EASY STORAGE: This sponge mop bucket is perfect for small apartment. Small bucket but as it uses water effective, can do big areas. All pieces are compact enough to fit effortlessly inside the bucket. When you don't use it, just put your household cleaning tools in the corner and never wor....

PVA Professional Double Roller Ultra Foam Rubber Mop Head Replacement (3x)

• Polyvinyl alcohol (PVA) sponge mop head is highly absorbent and durable.
• Horizontal grooves are specially designed to lift dirt off floors, windows and other surfaces.
• The Super, Magical, Sweep 'N Mop, Quickee, and Wilen 11" PVA mops..
• PVA UNIVERSAL HEAD For use on any standard 11" sponge mop handle. Note May not fit CLOROX MOP.
• Includes Set of 3 sponge mop head - Handle AND mounting screws not included.

SainSmart 1.75mm PVA Dissolvable 3D Printers Filament, Upgrade Water Soluble Support Filament for 3D Printers -0.5kg/1.1lbs (Natural), Dimensional Accuracy +/- 0.05mm

• Faster Dissolution Rate: PVA filament begins to dissolve after 1-2 minutes in water at 50°C..
• Creative Freedom: Sainsmart PVA filament provides stable support to complex designs, even those with features like cavities, and intricate internal details..
• Compatible with PLA: PVA is used in conjunction with PLA not ABS because it adheres well to PLA. The extrusion temperature difference can also be problematic with ABS..
• Printing Setting: Recommended Extrusion/Nozzle Temperature 190ºC- 210ºC (212ºF - 410ºF).
• Recommended bed Temperature 60ºC- 80ºC (140ºF - 176ºF)..
• Package: PVA 3D Printer Filament Vacuumed Sealed With Desiccant..

Fused Materials PVA 3D Printer Filament, 1.75mm, 0.5kg roll

• An Innovative Material - Fused Materials PVA is a water soluble filament used with dual extruder 3D printers to print support structures.
• Consistent Diameter - +/- .03mm dimensional accuracy.
• Optimized for PLA - PVA works with a variety of materials but it works best with PLA.
• Low-print temperature - PVA work best at low-temperatures. Refer to the instructions on the box!.
• Works on all major dual extruder 3D printer brands.