Categories

Best Bias Voltage

Juried Engineering LM324N LM324 Quadruple Independent High-Gain Frequency-Compensated Operational Amplifier Op-Amp IC DIP-14 14-PIN DIP Breadboard-Friendly (Pack of 3)

  • The LM324 consist of four independent high-gain frequency-compensated operational amplifiers that are designed specifically to operate from a single supply or split supply over a wide range of voltages..
  • Low Supply-Current Drain Independent of Supply Voltage: 0.8 mA Typical, Wide Supply Ranges:003c/b003e Single Supply: 3 V to 32 V Dual Supplies: ±1.5 V to ±16 V.
  • Low Input Bias and Offset Parameters - Input Offset Voltage: 3 mV Typical - Input Offset Current: 2 nA Typical - Input Bias Current: 20 nA Typical.
  • Common-Mode Input Voltage Range Includes Ground, Allowing Direct Sensing Near Ground.
  • Differential Input Voltage Range Equal to Maximum-Rated Supply Voltage: 32 V.
Check Stock

Juried Engineering LM324N LM324 Quadruple Independent High-Gain Frequency-Compensated Operational Amplifier Op-Amp IC DIP-14 14-PIN DIP Breadboard-Friendly (Pack of 10)

  • The LM324 consist of four independent high-gain frequency-compensated operational amplifiers that are designed specifically to operate from a single supply or split supply over a wide range of voltages..
  • Low Supply-Current Drain Independent of Supply Voltage: 0.8 mA Typical, Wide Supply Ranges:003c/b003e Single Supply: 3 V to 32 V Dual Supplies: ±1.5 V to ±16 V.
  • Low Input Bias and Offset Parameters - Input Offset Voltage: 3 mV Typical - Input Offset Current: 2 nA Typical - Input Bias Current: 20 nA Typical.
  • Common-Mode Input Voltage Range Includes Ground, Allowing Direct Sensing Near Ground.
  • Differential Input Voltage Range Equal to Maximum-Rated Supply Voltage: 32 V.
Check Stock

ANCEL BA101 12V 100-2000 CCA 220AH Automotive Battery Load Tester with ANCEL PB100 Circuit Probe Vehicle Diagnostic Volt Meter 12V/24V AC/DC Resistance Detector

  • Includes: 1x BA101 Battery Tester, 1x PB100 Circuit Tester.
  • Small compact design, fast scan and direct test results display are some of BA101’s benefits. It’s a simple and easy yet quick and accurate tool for analyzing the health of a 12V battery. It tells you everything about battery’s voltage, charge, cranking power, and how much life is left of it (level of Ohm resistance)..
  • It checks the alternator's charging and starter's cranking conditions. Vehicle charging system test is also available, including load voltage, unloaded voltage, ripple status and charging system status..
  • A MUST-HAVE TOOL - Designed for voltage & polarity testing, continuity testing, signal circuit testing, supply power/activating components, trailer lights & connections testing. It features red/green polarity indicators, follows & locates short circuits, and checks bad Ground contacts..
  • 4 WORKING MODES - DC Voltage mode for reading the DC voltage with a resolution of 0.1 volts.
  • AC Voltage mode for reading the Max. voltage, the Min. voltage, and frequency.
  • Resistance mode for reading the resistance between the tip and auxiliary ground lead.
  • Diode mode for checking forward bias or reverse bias..
Check Stock

Juried Engineering TL072CP TL072 IC JFET Operational Amplifier & 8-Pin DIP Sockets with Machined Contact Pins Breadboard-Friendly (Pack of 5)

  • The TL072 JFET-input operational amplifiers incorporate well-matched, high-voltage JFET and bipolar transistors in a monolithic integrated circuit. The devices feature high slew rates, low-input bias and offset currents, and low offset-voltage temperature coefficient..
  • Low Power Consumption, Wide Common-Mode and Differential Voltage Ranges, Low Input Bias and Offset Currents.
  • Output Short-Circuit Protection, Low Total Harmonic Distortion: 0.003% (Typical), Low Noise Vn = 18 nV/√Hz (Typical) at f = 1 kHz.
  • High-Input Impedance: JFET Input Stage, Internal Frequency Compensation, Latch-Up-Free Operation.
  • High Slew Rate: 13 V/µs (Typical), Common-Mode Input Voltage Range Includes VCC+, Example Applications: Motor Integrated Systems: UPS, Drives and Control Solutions: AC Inverter and VF Drives, Renewables: Solar Inverters, Pro Audio Mixers, DLP Front Projection System, Oscilloscopes.
Check Stock

Juried Engineering TL072CP IC Dual Low-Noise JFET-Input Operational Amplifier & 8-Pin DIP Sockets with Machined Contact Pins Breadboard-Friendly (Pack of 10)

  • The TL072 JFET-input operational amplifiers incorporate well-matched, high-voltage JFET and bipolar transistors in a monolithic integrated circuit. The devices feature high slew rates, low-input bias and offset currents, and low offset-voltage temperature coefficient..
  • Low Power Consumption, Wide Common-Mode and Differential Voltage Ranges, Low Input Bias and Offset Currents.
  • Output Short-Circuit Protection, Low Total Harmonic Distortion: 0.003% (Typical), Low Noise Vn = 18 nV/√Hz (Typical) at f = 1 kHz.
  • High-Input Impedance: JFET Input Stage, Internal Frequency Compensation, Latch-Up-Free Operation.
  • High Slew Rate: 13 V/µs (Typical), Common-Mode Input Voltage Range Includes VCC+, Example Applications: Motor Integrated Systems: UPS, Drives and Control Solutions: AC Inverter and VF Drives, Renewables: Solar Inverters, Pro Audio Mixers, DLP Front Projection System, Oscilloscopes.
Check Stock

Comparator Dual177;18V/36V 8-Pin SO N T/R

  • Wide range of supply voltage Maximum rating: 2 V to 36 V, Low input bias current, Low output saturation voltage.
  • Low supply-current independent of supply voltage: 200 µA per comparator, Low input offset voltage.
  • Common-mode input voltage range Includes Ground, Output compatible with TTL, MOS, and CMOS.
  • Differential input voltage range equal to maximum-rated supply voltage: ±36 V, Example Applications: Vacuum robot, Single phase UPS, Server PSU, Cordless power tool, Wireless Infrastructure, Appliances, Building Automation, Factory automation & control, Motor drives, Infotainment & cluster.
Check Stock

Texas Instruments LM311P LM311 Differential Comparator With Strobes DIP8 5 Pack

  • Wide range of supply voltage Maximum rating: 2 V to 36 V, Low input bias current, Low output saturation voltage.
  • Low supply-current independent of supply voltage: 200 µA per comparator, Low input offset voltage.
  • Common-mode input voltage range Includes Ground, Output compatible with TTL, MOS, and CMOS.
  • Differential input voltage range equal to maximum-rated supply voltage: ±36 V, Example Applications: Vacuum robot, Single phase UPS, Server PSU, Cordless power tool, Wireless Infrastructure, Appliances, Building Automation, Factory automation & control, Motor drives, Infotainment & cluster.
Check Stock

Juried Engineering LM319N LM319 High Speed Dual Comparator Breadboard-Friendly (Pack of 5)

  • Four independent voltage comparators that are designed to operate from a single power supply over a wide range of voltages.
  • Wide Supply Ranges Single Supply: 2 V to 36 V, Dual Supplies: ±1 V to ±18 V, Differential Input Voltage Range Equal to Maximum-Rated Supply Voltage: ±36 V, Low Input Offset Current: 3 nA (Typical).
  • Low Supply-Current Drain Independent of Supply Voltage: 0.8 mA (Typical), Low Output Saturation Voltage, Common-Mode Input Voltage Range Includes Ground.
  • Low Input Bias Current: 25 nA (Typical), Low Input Offset Voltage: 2 mV (Typical), Low Output Saturation Voltage.
  • Example Applications: Industrial, Automotive: Infotainment and Clusters, Body Control Modules, Power Supervision, Oscillators, Peak Detectors, Logic, Voltage Translation.
Check Stock

Juried Engineering LM393P IC Dual Differential Comparator & 8-Pin DIP Sockets with Machined Contact Pins Breadboard-Friendly (Pack of 1)

  • Wide range of supply voltage Maximum rating: 2 V to 36 V, Low input bias current, Low output saturation voltage.
  • Low supply-current independent of supply voltage: 200 µA per comparator, Low input offset voltage.
  • Common-mode input voltage range Includes Ground, Output compatible with TTL, MOS, and CMOS.
  • Differential input voltage range equal to maximum-rated supply voltage: ±36 V, Example Applications: Vacuum robot, Single phase UPS, Server PSU, Cordless power tool, Wireless Infrastructure, Appliances, Building Automation, Factory automation & control, Motor drives, Infotainment & cluster.
Check Stock

Juried Engineering LM393P LM393 IC Dual Differential Comparator & 8-Pin DIP Sockets with Machined Contact Pins Breadboard-Friendly (Pack of 10)

  • Four independent voltage comparators that are designed to operate from a single power supply over a wide range of voltages.
  • Wide Supply Ranges Single Supply: 2 V to 36 V, Dual Supplies: ±1 V to ±18 V, Differential Input Voltage Range Equal to Maximum-Rated Supply Voltage: ±36 V, Low Input Offset Current: 3 nA (Typical).
  • Low Supply-Current Drain Independent of Supply Voltage: 0.8 mA (Typical), Low Output Saturation Voltage, Common-Mode Input Voltage Range Includes Ground.
  • Low Input Bias Current: 25 nA (Typical), Low Input Offset Voltage: 2 mV (Typical), Low Output Saturation Voltage.
  • Example Applications: Industrial, Automotive: Infotainment and Clusters, Body Control Modules, Power Supervision, Oscillators, Peak Detectors, Logic, Voltage Translation.
Check Stock

ALL-TEST PRO Motor Genie Deenergized Motor Circuit Analysis Testing Instrument

  • Accurate measurement: In order to improve the accuracy of voltage measurement,Battery capacity testers circuit is specially designed for DC bias. When the terminal is not connected at all, it will display a small voltage, which does not affect the actual measurement.
  • Size:Discharge testers board size is 5x3.4 cm/1.97x1.34 inch, small, easy to carry and store.
  • Power supply voltage:Battery capacity meters power supply voltage: DC4.5-6V (micro USB interface), working current: less than 70mA. Supported current: no more than 3.000A resolution 0.001A.
  • Discharge voltage:Battery meter testers discharge voltage: 1.00V-15.00V, resolution 0.01V. Termination voltage range: 0.5-11.0V.
  • Battery capacity:Battery meters battery capacity range: 9999Ah (1Ah=1000mAh). When the value is large, it is switched by the decimal point shift. When it is lower than 10Ah, it is displayed as X.XXX, and when it reaches 10Ah, it is displayed as XX.XX..
Check Stock

Multifunction Bias Tape Maker Kit 11 PCS Set, Single Double Fold 4 Sizes for DIY Sewing Craft Tools, with Sewing Awl Bead Needles Adjustable Binder Clip Wooden Awl

  • ❤️【Standard Size & Bias Tape Set】Fit in the majority of sewing machines, This bias tape maker set of 4 sizes including 6mm,12mm,18mm,25mm binding maker, four litter clips, a wooden awl,50 pieces bead needles, and one adjustable bias binder foot, which can meet your needs for making bias tapes., the smaller Sewing clips are perfect for those hard to reach spots as well as using them to mark where not to sew..
  • ❤️【DIY Complete Bias Tape Set】If you are making bias tape for appliqué or any sewing project, this sewing tool is for you! Choose the fabric pattern you like, Easily DIY your own bias tape to make quilt binding seams, sewing, serging, crafting, fishing, and little projects, like placemats, bibs, armhole, neckline, applique and so on..
  • ❤️【Versatile & Bias Binding Foot】The sewing awl can take the cloth strip and untie cloth strip knot. Four different fabric bias tapes, you can choose which one you need according to the situation. And you can secure the tissue or the cloth with the bead needles. Snap-on adjustable bias tape binding foot fits all low shank snap-on singers, domestic sewing machine, they are sturdy and useful for all types of crafts..
  • ❤️【Make Single/ Double Fold Bias Binding】1/4'' Bias Tape Maker, 1/2....
Check Stock

Bias Tape Maker Set, Neo LOONS Sewing Fabric Bias Tape Maker Tool Kit with Binder Foot, 6MM 12MM 18MM 25MM 4 Sizes DIY Patchwork Sewing Accessories Tools Set for Quilt Binding

  • 【Make Bias Tapes in Minutes】Fabric Bias Tape maker kit helps you fold the fabric into perfect halves automatically and help you make bias tapes in minutes. Easily DIY your own bias tape to make quilt binding seams, sewing, serging, crafting, fishing, and little projects, like placemats, bibs, armhole, neckline, applique and so on..
  • 【4 Sizes Bias Tape Makers】Green 1/4'', Yellow 1/2'', Red 3/4'', Blue 1''. The smaller Sewing clips are perfect for those hard to reach spots as well as using them to mark where not to sew. And the large clips are perfect and strong enough to hold together several layers of leather..
  • 【DIY Single/ Double Fold Bias Binding】--1/4'' Bias Tape Maker, 1/2'' Bias Strip= 1/4'' Single Fold Bias Tape= 1/8'' Double Fold Bias Tape, Single-fold bias tape can be ironed in half lengthwise to make double-fold bias tape, it's a really handy addition to the sewing tool kit..
  • 【How to DIY Your Own Bias Tapes】Choose the fabric pattern you like, cut your fabric strips the same width as the large opening of sewing clips at 45 Degree, cut a point on one end and feed through while you iron. Make your own bias tape with this handy bias tape make. Not only is it economical, but you can also quickly make the colors or patterns you ne....
Check Stock