Categories

Best Big Bore Cylinder

Vito's HEMI Compatible with Head aftermarket Billet Compatible with Aluminum Cool 1987-2006 Banshee + Compatible with Head Nuts

  • 19cc cylinder head cool head domes fit for Yamaha Banshee 350 YFZ350 1987-2006..
  • ONLY fit for std. 64-66 mm cylinder bore. DO NOT fit for big bore 66-68.5 mm, etc..
  • Made of high quality aluminum 6061 T6, CNC milled. Anodized in Silver..
  • Package includes 2 x domes. Easy to install, direct replacement..
  • ✔100% brand new. ✔1 year warranty. We will reply within 24 hours of receiving your email..
Check Stock

Makita MAC700 2.0 HP* Big Bore™ Air Compressor

  • Cast iron pump with big bore cylinder and piston, combined with greater bore and stroke, delivers maximum performance.
  • Substantially lower noise levels with a large 1,720 RPM pump, enabling greater displacement at lower RPM.
  • Low amp draw reduces incidences of tripped breakers and voltage drop that can cause premature motor failure.
  • Oil lubricated provides cooler running pump, minimizes wear.
Check Stock

Makita MAC5200 3.0 HP* Big Bore™ Air Compressor

  • Cast iron pump with Big Bore cylinder and piston is engineered to provide faster recovery time for improved performance.
  • Powerful 3.0 HP motor produces 6.5 CFM at 90 PSI for increased productivity.
  • Pump is oil-lubricated for cooler running temperatures and reduced wear.
  • Durable cast iron cylinder reduces wear and increases pump life.
  • Folding handle with low profile design for easy storage with handle folded.
Check Stock

NICHE 348cc Engine Piston Cylinder Top End Kit for 1987-2011 Yamaha Big Bear Bruin Grizzly Raptor Warrior Wolverine

  • Replaces OEM Part Numbers: Yamaha 1UY-11310-03-00, 4KB-11351-00-00,93450-19095-00, 4GB-11610-00-00,1YW-11631-01-Y0, 55V-11633-00-00,1UY-11181-01-00, 5YT-11310-00-00,4WU-11310-00-00.
  • Compatible with the 1987-1999 Yamaha Big Bear 350, 1987-1988 Yamaha Big Wheel 350, 1987-1990, 1992-1995 Yamaha Moto-4 YFM350ER, 1987-2004 Yamaha Warrior 350, 1995-2009 Yamaha Wolverine 350, 2004-2006.
  • Includes Cylinder, Piston, Piston Rings, Wristpin, Circlips and Head Gasket.
  • Also Includes Base Gasket and NGK Spark Plug.
  • Cylinder Bore and Stroke 83.00mm x 64.50mm.
Check Stock

1\ Bore X 24\ Stroke Double Acting Pneumatic Cylinder (Roughly 1\ Bore 20MM)

  • These pneumatic cylinders are what everyone uses to make Halloween Props. They are extremely versatile, and have tons of mounting options that will allow you to set up your prop in may different ways.
  • You can also use these with a 2-way or 3-way solenoid if you are using gravity/weight to push the cylinder back down. When the solenoid is triggered, air is applied through the bottom hole - forcing rod up very quickly..
  • Examples: Lid Opener Pop-up props Moving Skeletons or Zombies Door Banger Coffin Lid Banger Barrel Lid Banger Monster in a Box Trash Can Trauma Bore.
  • These double-acting cylinders extend quickly when air is applied, and snap closed quickly when Solenoid is triggered (when used with a 4-way solenoid)..
  • This is the measure of the diameter of the cylinder. Bigger bore size = more air required to open cylinder = more torque (power) to move things. With this roughly 1" BORE, you will get about 100 lbs. of force at 100 PSI of air pressure. Stroke: This is the measure of how far out the shaft of the cylinder will extend when fully extended. Air Holes: Cylinder comes with two push-in fittings that accept 1/4" airline..
Check Stock

EWK 2\ to 7\ 3 Stones Engine Cylinder Hone Tool Adjustable Cylinder Deglazer Piston Honer 220 Grit

  • 【 Awesome Engine Rebuild 】 EWK cylinder hone tool is perfect to deglaze the walls of cylinders in gasoline and diesel engines. Idea for remove burrs and properly roughen the cylinder walls to produce an oil holding cross hatch pattern and provide an adequate seal..
  • 【 Smooth Surface Deglazing 】Fits 2” to 7 (50.8mm to 177.8mm) diameter brake caliper bores, engine cylinders of automotive, motorcycle and industrial equipment. The 3 pieces adjustable 3” stones are perfect to work with 1/4” power drill for effectively creating friction on cylinder bore..
  • 【 Highly Flexible 】 Adjustable tension screw, controls the spring pressure of stones against cylinder bore to meet different piston diameters. The self-aligning and flexible shaft ensures a smooth movement to get you a nice even hatch pattern bore..
  • 【 Durable & Long Lasting & Replaceable 】 Made of premium steel, maximize the cylinder honing tool with extra strength and durability. The 220 grit stones are replaceable and will worn out gradually depends on how often you use it..
  • 【 EWK Assurance】Excellent WorKing experience guaranteed! EWK provides you premium quality tools and the best service with 12 months warranty. If there is any problem or concern with our products, please contact ....
Check Stock

Dial Indicator Bore Gage 2' - 6' Range 0.001' Precision, Industrial Deep Engine Cylinder Measuring Tool with Carbide Anvils and Jewel Bearing, Silver Grey

  • Precise Measurement: The measuring range of cylinder dial bore gauge is 2″-6″, the accuracy is 0.001″.
  • High Accuracy Industrial Measurement: Users can measure cylinder out-of-roundness and taper without removing the piston with bore measurements up to 10″ deep – this diameter gauge can reach critical wear areas of the cylinder.
  • Sturdy and Wear-Resistant: The engine cylinder measuring tool is made of stainless steel, the measuring plunger contains a carbide tip, and the dial contains gem bearings, which effectively improves the durability of the cylinder inner diameter dial indicator.
  • High-Quality Probe: Sealed probe, glass mirror cover, waterproof and dustproof, insulated grip, effective heat insulation, clear scale, allowing you to see the data more intuitively.
  • Package: Contains all necessary spacers, interchangeable extensions and ABS storage case, easy to use and easy to assemble. If you encounter any problems during the use of our dial indicator bore gage, please feel free to contact us, we will solve the problem perfectly for you.
Check Stock

Isky Racing Cams 100-GRM Groove-O-Matic Engine Block Ringing Tool

  • Pilots in the cylinder bore & is easily adjustable for bore diameter and depth of cut for the copper 0-ring groove.
  • Fast and profitable way to "0-Ring" the cylinder block face.
Check Stock

Brush Research 1\ (25mm) Flex-Hone Cylinder Hone Tool 180 Grit (Silicon Carbide)

  • Flexible Cylinder Hone made of Silicon Carbide.
  • Hone is Made in USA by Brush Research Manufacturing.
  • Hone is self centering and can be used with 3/8" or 1/2" chuck drill.
  • Perfect for bore honing and cylinder refinishing.
  • The hone size listed on the product is the bore it is intended to be used for (or slightly smaller bore will work).
Check Stock

Brush Research 2\ (51mm) Flex-Hone Cylinder Hone Tool 240 Grit (Silicon Carbide)

  • Flexible Cylinder Hone made of Silicon Carbide.
  • Hone is Made in USA by Brush Research Manufacturing.
  • Hone is self centering and can be used with 3/8" or 1/2" chuck drill.
  • Perfect for bore honing and cylinder refinishing.
  • The hone size listed on the product is the bore it is intended to be used for (or slightly smaller bore will work).
Check Stock

Makita MAC2400 2.5 HP* Big Bore™ Air Compressor

  • Cast iron pump with Big Bore cylinder and piston is engineered to provide faster recovery time for improved performance.
  • Powerful 2.5 HP 4-Pole motor produces 4.2 CFM at 90 PSI for increased productivity and lower noise.
  • Roll-cage construction provides complete protection to withstand extreme jobsite environments.
  • Low AMP draw reduces incidences of tripped breakers at start-up.
  • Pump is oil-lubricated for cooler running temperatures and reduced wear.
  • Oil lubricated: Cooler running pump, minimizes wear.
  • Durable cast iron cylinder reduces wear and increases pump life.
  • Powerful 2.5 HP 4 Pole motor produces 4.2 CFM at 90 PSI for increased productivity.
  • Large automotive style industrial air filter for increased air intake and greater efficiency.
  • Pump runs at lower RPM (1,730) resulting in lower noise (79dB) and improved pump durability.
Check Stock

Brush Research 3 3/4\ (95mm) Flex-Hone Cylinder Hone Tool 240 Grit (Silicon Carbide)

  • Flexible Cylinder Hone made of Silicon Carbide.
  • Hone is Made in USA by Brush Research Manufacturing.
  • Hone is self centering and can be used with 3/8" or 1/2" chuck drill.
  • Perfect for bore honing and cylinder refinishing.
  • The hone size listed on the product is the bore it is intended to be used for (or slightly smaller bore will work).
Check Stock

Brush Research 3 1/2\ (89mm) Flex-Hone Cylinder Hone Tool 320 Grit (Silicon Carbide)

  • Flexible Cylinder Hone made of Silicon Carbide.
  • Hone is Made in USA by Brush Research Manufacturing.
  • Hone is self centering and can be used with 3/8" or 1/2" chuck drill.
  • Perfect for bore honing and cylinder refinishing.
  • The hone size listed on the product is the bore it is intended to be used for (or slightly smaller bore will work).
Check Stock