Categories

Best Biggest Lathes

Shars 3MT Long Nose CNC Live Center, High Speed Medium Duty, Carbide Tipped 202-3573 S[

  • Small Body 23 mm Diameter Triple Bearing Live Revolving Center..
  • Tool Steel Housing and hardened point. Run out within 0.001" Suited for small woodworking lathes.
  • Compatible with lathes having Morse taper 1..
Check Stock

FomaSP SPB2-26 26mm High Tool Holder for Grooving Adjustable Blades for GTN-2(SP200) Inserts, 1 PCS

  • Application External Grooving Parting off, fit for all CNC lathes and manual lathes, good at grooves, parting off..
  • Easy removal of grooving inserts with user..
  • Boring bar with high speed steel shank, strong shock resistance, thermal cracking and resistance to deformation.
Check Stock

Aluminum Alloy Mini Handwheel Mechanical Hand Wheel 50mm (50x8mm)

  • Material: The lathe milling hand wheel of the lathe is made of high-quality bakelite, with strong insulation and durability.
  • Easy to install: The hand wheel has a detachable rotating handle, and the hand wheel has screw holes for easy handle installation.
  • Application: Revolving handle hand wheels are widely used in industrial machine tools, such as milling machines, lathes, grinders, etc.
  • Features: New type, convenient movement of the milling handle hand wheel, strong carrying capacity.
  • Unique design: This plastic lathe hand wheel is a rear corrugated hand wheel design, which is convenient to replace one of the broken lathes.
Check Stock

Brad Point Woodworking 60Pcs Drill Bit Set Drill for Hardwood Softwood

  • ✔️【WOOD BRAD POIINT DRILL SIZE】: 1/8" -5/32"-3/16"-1/4"-5/16"-3/8"-7/16"-1/2".
  • ✔️【BRAD POINT TIP】: Special brad-point tip bites into to wood, prevents drill bit from skipping or walking without centering punch. Great for use with oak, maple, cherry and other tough woods.
  • ✔️【MATERIAL】: Made of chrome vanadium steel hardened and tempered for longer useful life, Use in Hand Drills Eletric Drills Drill Press and lathes..
  • ✔️【APPLICATION】: Designed to work for all wood projects especially suited for furniture making cabinetry and doweling where an exact hole is required.
  • ✔️【USED WITH】: Use in hand drills electric drills drill presses and lathes.
Check Stock

(new quality part) QUALITY MADE DRIVE BELT FOR DELTA MIDI LATHE MODEL 46-250 TYPE 2 / check more information in description

  • Rockwell/Delta 11"/14" Wood Lathe, Spindle Bearings, Set of 2.
  • These are for later model 46-111 lathes. They will not fit early model 14-111 lathes that used non-extended race bearings. It is recommend you measure your bearings prior to ordering.
  • Bearings have a 52mm OD, 25mm ID and are 15mm wide..
  • Replaces Rockwell/Delta Part Numbers: Delta part number: SP-5360 or 920-04-020-5360 or ND7705.
Check Stock

Brad Point Woodworking Drill Bit 3/16 in.Spur Point Drill Hardwood Softwood-10Pcs

  • ✔️【WOOD BRAD POIINT DRILL SIZE】: 3/16" (Diameter) x 2"(Flute Length) x 3-11/32"(Overall Length).
  • ✔️【BRAD POINT TIP】: Special brad-point tip bites into to wood, prevents drill bit from skipping or walking without centering punch. Great for use with oak, maple, cherry and other tough woods.
  • ✔️【MATERIAL】: Made of chrome vanadium steel hardened and tempered for longer useful life, Use in Hand Drills Eletric Drills Drill Press and lathes..
  • ✔️【APPLICATION】: Designed to work for all wood projects especially suited for furniture making cabinetry and doweling where an exact hole is required.
  • ✔️【USED WITH】: Use in hand drills electric drills drill presses and lathes.
Check Stock

Wood Brad Point Drill Bit Set 3/8 In Spur Point Stubby Woodworking Twist Drill Bits-5Pcs

  • ✔️WOOD BRAD POIINT DRILL SIZE: 3/8" (Diameter) x 3-9/16"(Flute Length) x 5-1/4"(Overall Length).
  • ✔️BRAD POINT TIP: Special brad-point tip bites into to wood, prevents drill bit from skipping or walking without centering punch. Great for use....
  • ✔️MATERIAL: Made of chrome vanadium steel hardened and tempered for longer useful life, Use in Hand Drills Eletric Drills Drill Press and lathes..
  • ✔️APPLICATION: Designed to work for all wood projects especially suited for furniture making cabinetry and doweling where an exact hole is....
  • ✔️USED WITH: Use in hand drills electric drills drill presses and lathes.
Check Stock

Mini Vertical Milling Slide Mounted on Z Type Caste Iron Angle Plate -Direct Fit for Mini Lathes

  • Small Vertical Milling Slide for Bench Small Lathes Suitable for Bench Lathes upto 150 mm Swing.
  • Base Dimension :50 x 55 mm * Sliding Table :90 x 50 mm * Vertical Travel 40 mm.
  • Tee- Slot width 9.5 mm Maximum *Jaw Opening : 70 mm * Adjustable Vice Jaws & Brass Gib.
  • Supplied with a Z type Angle Plate. Precision ground from all sides/ faces for perpendicularity/ squareness..
  • One base side of the Caste iron has 2 x Counter drills with suitable stud bolts to clamp the slide and the other has a continuous slot to fasten it through the lathe's toolpost stud. Check all pictures carefully.
Check Stock

MAX-CRAFT Wood Brad Point Drill Bit Set 1/8 in Spur Point Woodworking Drill Bits-20Pcs

  • ✔️WOOD BRAD POIINT DRILL SIZE: 1/8" (Diameter) x 1-5/16"(Flute Length) x 2-23/64"(Overall Length).
  • ✔️BRAD POINT TIP: Special brad-point tip bites into to wood, prevents drill bit from skipping or walking without centering punch. Great for use....
  • ✔️MATERIAL: Made of chrome vanadium steel hardened and tempered for longer useful life, Use in Hand Drills Eletric Drills Drill Press and lathes..
  • ✔️APPLICATION: Designed to work for all wood projects especially suited for furniture making cabinetry and doweling where an exact hole is....
  • ✔️USED WITH: Use in hand drills electric drills drill presses and lathes.
Check Stock

Wood Brad Point Drill Bit Set 1/8 in. Spur Point Stubby Woodworking Twist Drill Bits-10Pcs

  • ✔️WOOD BRAD POIINT DRILL SIZE: 1/8" (Diameter) x 1-5/16"(Flute Length) x 2-23/64"(Overall Length).
  • ✔️BRAD POINT TIP: Special brad-point tip bites into to wood, prevents drill bit from skipping or walking without centering punch. Great for use with oak, maple, cherry and other tough woods.
  • ✔️MATERIAL: Made of chrome vanadium steel hardened and tempered for longer useful life, Use in Hand Drills Eletric Drills Drill Press and lathes..
  • ✔️APPLICATION: Designed to work for all wood projects especially suited for furniture making cabinetry and doweling where an exact hole is required.
  • ✔️USED WITH: Use in hand drills electric drills drill presses and lathes.
Check Stock

Shop Fox M1099 10 by 26" Bench athe, Metal, Large

  • ... We have a direct relationship with the Manufacturer, and we offer full technical support for the machine plus all replacement parts, upgrades and accessories to keep it running for years of service. The 1014 lathe is manufactured by a world leader in lathes and mills and makes metalworking machines for some of the biggest tool brands in the world..
Check Stock

Woodcut Tools Bowlsaver Complete System with Two Blades for Coring Bowl Blanks 3 to 12 on Woodturning Lathe BSVR

  • SAFE AND EASY FOR ALL LEVELS - The only coring device which is integrated with both the tool rest tail stock, making it the safest coring device on....
  • SAVE MONEY AND TIME - Create multiple bowl blanks, no additional blade purchases required. The Bowlsaver includes two high strength blades (used one....
  • LATHES 1HP AND UP - Can be used on almost all Woodturning Lathes, from 12" to 16" swing with 1HP and up. 1" tool post included however, each lathe has....
  • PREDICTABLE RESULTS EVERY TIME - The Woodcut Tools Bowlsaver has long lasting Stellite cutters which can cut green or seasoned wood, accurately remove....
  • USER GUIDES, TEMPLATE & VIDEOS SUPPLIED - An extensive user guide booklet is included in the box with your Bowlsaver. User guide, set up and....
Check Stock

WFLNHB Live Center 2MT 60 Degree Lathe Medium Duty Live Tailstock Center for Wood & Metal Lathe CNC Work

  • Specification: #2 Morse Taper (2MT) shank, 60-degree point, 5000 Max RPM, 600 lbs max workpiece weight, runout of 0.0004in/0.01mm T.I.R..
  • Material: The live revolving center is made of precision ground hardened steel, hardened to 61-65HRC, with high rigidity and wears resistance.
  • Triple Bearing Design: The 2MT activity center adopts a combination of a thrust ball bearing and two ball bearings for stable and smooth rotation.
  • Seal Ring: There is a seal ring at the front gland to prevent the entry of cutting fluid and dust.
  • Application: The live center MT2 is specially designed for lathes under medium-speed and medium-load environments. It can be used for high-speed turning and is suitable for CNC lathes.
Check Stock