Categories

Best Billet Gas Caps

PACEWALKER Baking Paint 1 Pair Motorcycles Slash Cut Exhaust Muffler Pipe for 1-3/8\

  • Featuring large 4-inch mufflers finished with raceinspired CNC machined billet end caps, Eliminator 400s are tuned to give compatible with Harley-Davidson baggers a deep and aggressive roar..
Check Stock

Supreme Suspensions - 4pc Set [Black] 2 Wheel Spacers for 2010-2014 Dodge Ram 2500 3500 2WD 4WD - BP 8x165.1mm | CB 130mm | Studs M14x1.5-4 Tire Valve Caps Included

  • COMPATIBLE WITH 2010 - 2014 Dodge Ram 2500 & Ram 3500 (2WD 4WD). *Does NOT fit models with DUALLY setup. Ram 2500 & Ram 3500 models were released with....
  • CONTENTS: (4x) T6 Billet Aluminum Lug Centric Wheel Spacers with Precision-Machined Splined Studs, (4x) T6 Billet Aluminum Tire Valve Stem Caps with....
  • SPECIFICATIONS: 2 Inches Thick, 8 x 6.5" (8 x 165.1mm) Bolt Pattern, M14 x 1.5 Studs, 130mm Center Bore Without Lip | NOTE: Spacers are lug-centric,....
  • BENEFITS: Positions your wheels 2 inches outward on each side to correct tire rubbing issues, increase cornering stability, and allow for a more....
  • UNIVERSAL TIRE VALVE STEM CAPS: Included with purchase are 4 Universal Tire Valve Stem Caps precision CNC machined from Light-Weight T6 Billet....
Check Stock

Supreme Suspensions - 4pc Set - Silver - 2 Hub Centric Wheel Spacers for Toyota Tacoma PreRunner 2WD & Tacoma 4WD - BP 6x5.5 / CB 106mm / Studs M12x1.5 [4 Tire Valve Caps Included]

  • COMPATIBLE WITH 1995 - 2020 Toyota Tacoma PreRunner (6-Lug 2WD) and 1995 - 2021 Toyota Tacoma (4WD). *Will NOT work on vehicles with DUALLY wheels or....
  • CONTENTS: (4x) T6 Billet Aluminum Hub Centric Wheel Spacers with Precision-Machined Splined Studs, (4x) T6 Billet Aluminum Tire Valve Stem Caps,....
  • SPECIFICATIONS: 2 Inches Thick, 6 x 5.5" (6 x 139.7mm) Bolt Pattern, M12 x 1.5 Studs, 106mm Center Bore | NOTE: Spacers are Hub-Centric to ensure the....
  • BENEFITS: Positions your wheels 2 inches outward on each side to correct tire rubbing issues, increase cornering stability, and allow for a more....
  • UNIVERSAL TIRE VALVE STEM CAPS: Included with purchase are 4 Universal Tire Valve Stem Caps precision CNC machined from Light-Weight T6 Billet....
Check Stock

Supreme Suspensions - 4pc Set of 2 Hub Centric Wheel Spacers for 2002-2011 Dodge Ram 1500 2WD/4WD - 5x5.5 5x139.7mm BP with 9/16 x18 Studs 77.8mm Center Bore w/Lip Black

  • COMPATIBLE WITH 2002 - 2011 Dodge Ram 1500 2WD / 4WD. *Does NOT fit models with DUALLY setup. Please verify fitment compatibility prior to ordering..
  • CONTENTS: (4x) T6 Billet Aluminum Hub Centric Wheel Spacers, (4x) T6 Billet Aluminum Tire Valve Stem Caps, Installation Hardware, and Supreme....
  • SPECIFICATIONS: 2 Inch Thick, 5 x 139.7mm (5 x 5.5") Bolt Pattern, 9/16" x 18 Stud Size, 77.8mm Hub Centric Center Bore (Matches Vehicle Hub Diameter).
  • BENEFITS: Positions your wheels 2" outward on each side to correct tire rubbing issues, increase cornering stability, and allow for a more impressive....
  • UNIVERSAL TIRE VALVE STEM CAPS: Included with purchase are four Universal Tire Valve Stem Caps precision CNC machined from light-weight T6 Billet....
Check Stock

GPR 5011-4089K Black V4 Complete Stabilizer Kit

  • 11-compression adjustable from soft to hard designed to absorb thousands of pounds of impact.
  • Aluminum contruction with billet end caps that protect seals from dirt and mud.
  • Billet aluminum adjustment knob and body clamp.
  • Billet aluminum mounting clamps available in red, blue, black and silver.
Check Stock

Supreme Suspensions - 4pc Set [Black] 2 Hub Centric Wheel Spacers for 2012-2018 Dodge Ram 1500 2WD 4WD - 5x139.7mm Bolt Pattern M14x1.5 Studs 77.8mm Center Bore [Includes 4 Tire Valve Caps]

  • COMPATIBLE WITH 2012 - 2018 Dodge Ram 1500 (2WD 4WD). *Does NOT fit models with DUALLY setup. Please verify fitment compatibility prior to ordering..
  • CONTENTS: (4x) T6 Billet Aluminum Hub Centric Wheel Spacers with Precision-Machined Splined Studs, (4x) T6 Billet Aluminum Tire Valve Stem Caps,....
  • SPECIFICATIONS: 2 Inches Thick, 5 x 5.5" (5 x 139.7mm) Bolt Pattern, M14 x 1.5 Studs, 77.8mm Center Bore | NOTE: Spacers are Hub-Centric to ensure the....
  • BENEFITS: Positions your wheels 2 inches outward on each side to correct tire rubbing issues, increase cornering stability, and allow for a more....
  • UNIVERSAL TIRE VALVE STEM CAPS: Included with purchase are 4 Universal Tire Valve Stem Caps precision CNC machined from Light-Weight T6 Billet....
Check Stock

Gas Can Spout Replacement, Gas Can Nozzle Kit with Screw Collar Caps, Gasket Stopper,and 2 Kinds Gas Can Vent Cap for Most Style Gas Can, Highly Fitted, Smoothly Flow (4 Kit)

  • Gas Can Spout Replacement - Suitable for most 1/2/5/10 gal gas cans (not suit for Blitz gas cans)，we provide 8 Screw Collar Caps (4 Coarse Thread & 4 Fine Thread), 4 Spouts with rubber gaskets and plastic strainer, 4 nozzle caps with threads，2 kinds of gas con vent caps, and the drill bit required to install the gas discharge cap. A good universal gas can spout kit give your old cans new life..
  • High-quality Materials - These gas can pour nozzles and accessories are composed of high-quality plastic, the spout can be freely bent without breaking. they are light weight and easy to carry, environmentally friendly and long life. Thickened and widened rubber sealing gaskets allow gas can spout to fit perfectly with your gas can，there will be no oil overflow even in the case of transportation or the gas can is down..
  • 2 Types of Gas Can Thread Cap - The internal thread size of coarse thread cap and fine thread cap all are 1.75 inches, It can only be used for gas tanks with a tank mouth size of 1.75 inches. Please measure the size of your gas can mouth before purchasing. Perfect size, to ensure a tight fit between the collar cap and the gas can..
  • Unobstructed Flow Gas Can Nozzle Kits - We provide two gas can vent caps. Gas can vent caps-A is used for ....
Check Stock

CM Concepts Gas/Liquid Can Replacement Long Spout & Vent Kit-Ultimate Package

  • Gas Can Spout Replacement kit,Suitable for most 1/2/5/10 gallon oil cans, We provide 12 threaded collar caps 6 Coarse Thread & 6 Fine Thread . As shown in the picture The internal thread size is 1-3/4--1.7in , It can only be used for gas tanks with a tank mouth size of 1.75in. Please measure your oil tank mouth size before purchasing..
  • High-quality materials, These gas can nozzle replacement parts are made of high-quality HDPE materials,In use, you can bend freely without breaking.Thicker and widened rubber gaskets,Can better fit the bottle cap,Prevent liquid leakage when refueling..
  • Anti-overflow design,(Special Attention: As shown in the figure, the screw cap of the gas con spout cap is hexagonal)The spout tube and the spout cap are threaded, and the spout cap has a rubber sealing ring inside. Tighten the spout cap after use. There will be no oil overflow even in the case of transportation or the tank is down..
  • Can cover more oil cans, we provide two oil cans with vent caps,(gas con vent caps-A is used for oil cans without a vent at the end of the oil can,All you need is a simple drilling and installation and you are ready to use.) (gas con vent caps-B is used for another oil can with a vent cap at the tail , Can replace old vent caps.).
Check Stock

Arlen Ness Footpegs Knurled Fusion Black for Harley-Davidson All

  • The perfect fusion of traction, style and comfort.
  • Footpegs are machined from billet aluminum and wrapped in either diamond knurled or linear style rubber for excellent foot traction.
  • Knurled-style footpegs are made from a forged steel shaft, knurled-style rubber for excellent traction and billet aluminum accents for a clean look.
  • Air Trax footpegs feature an aggressive but comfortable rubber design that offers excellent traction while reducing vibration.
  • End caps are CNC-machined from billet aluminum.
Check Stock

Supreme Suspensions - 2' Hub Centric Wheel Spacers for 2007-2021 Toyota Tundra 2WD 4WD - BP: 5x150mm / CB: 110mm / Studs: M14x1.5 [4pc Black Pack] - 4 Tire Valve Caps Included

  • COMPATIBLE WITH 2007 – 2021 Toyota Tundra (2WD 4WD). *Does NOT fit models with DUALLY setup. Please verify fitment compatibility prior to ordering..
  • CONTENTS: (4x) T6 Billet Aluminum Hub Centric Wheel Spacers with Precision-Machined Splined Studs, (4x) T6 Billet Aluminum Tire Valve Stem Caps, Installation Hardware, and Supreme Suspensions Pro Pack.
  • SPECIFICATIONS: 2 Inches Thick, 5 x 150mm Bolt Pattern, M14 x 1.5 Studs, 110mm Center Bore | NOTE: Spacers are Hub-Centric to ensure the best centered / balanced install. No Ring Needed..
  • BENEFITS: Positions your wheels 2 inches outward on each side to correct tire rubbing issues, increase cornering stability, and allow for a more impressive stance. | Easy bolt-on installation takes just minutes with standard hand tools. *Note: Factory wheel studs may need to be shortened to ensure safe fitment of the wheel. We recommend the use of a Torque Wrench to ensure proper tightening of hardware..
  • UNIVERSAL TIRE VALVE STEM CAPS: Included with purchase are 4 Universal Tire Valve Stem Caps precision CNC machined from Light-Weight T6 Billet Aluminum with anodized surface and rust & water-resistant polymer thread inserts to prevent rust, corrosion, and chemical damage.
Check Stock

TWM Quick Action CNC Billet Fuel Gas Cap with Black Handle fits Kawasaki ER6 ZX6R ZX10R Z750 Z1000 R SX

  • First class Italian engineering and machinery from the Marchesini family!.
  • Quick release gas cap as used by top AMA and European Race teams..
  • Precision machined from billet aluminum and finished with high thickness anodizing..
  • Incredible weight savings! These fuel caps weigh in only at 130grams (4.58oz), as opposed to the factory Kawasaki OE cap that weigh in at 490grams (17.28oz)!.
  • Beware of replicas, TWM is the original inventor of the quick action fuel cap!.
Check Stock

Supreme Suspensions - 4pc Set [Black] 2' Hub Centric Wheel Spacers Kit for 2015-2022 Ford F-150 2WD 4WD - BP: 6x135mm / CB: 87mm / Studs: M14x1.5 - Valve Stem Caps Included

  • COMPATIBLE WITH 2015 – 2022 Ford F-150 (2WD 4WD). *Does NOT fit models with DUALLY setup. Please verify fitment compatibility prior to ordering..
  • CONTENTS: (4x) T6 Billet Aluminum Hub Centric Wheel Spacers with Precision-Machined Splined Studs, (4x) T6 Billet Aluminum Tire Valve Stem Caps, Installation Hardware, and Supreme Suspensions Pro Pack.
  • SPECIFICATIONS: 2 Inches Thick, 6 x 135mm Bolt Pattern, M14 x 1.5 Studs, 87mm Center Bore | NOTE: Spacers are Hub-Centric to ensure the best centered / balanced install. No Ring Needed..
  • BENEFITS: Positions your wheels 2 inches outward on each side to correct tire rubbing issues, increase cornering stability, and allow for a more impressive stance. | Easy bolt-on installation takes just minutes with standard hand tools. *Note: Factory wheel studs may need to be shortened to ensure safe fitment of the wheel. We recommend the use of a Torque Wrench to ensure proper tightening of hardware..
  • UNIVERSAL TIRE VALVE STEM CAPS: Included with purchase are 4 Universal Tire Valve Stem Caps precision CNC machined from Light-Weight T6 Billet Aluminum with anodized surface and rust & water-resistant polymer thread inserts to prevent rust, corrosion, and chemical damage.
Check Stock

Dorman 610-558 9/16-18 Serrated Wheel Stud - .65 In. Knurl, 2.5 In. Length Compatible with Select Dodge / Ram Models, 10 Pack

  • COMPATIBLE WITH Toyota Tacoma Models Equipped with M12 x 1.5 Factory Studs..
  • CONTENTS: (12x) M12 x 1.5 Thread High-Strength Spec Spline Type Extended Wheel Studs, (4x) T6 Billet Aluminum Tire Valve Stem Caps, and Supreme Suspensions Pro Pack.
  • TECHNICAL NOTES: M12 x 1.5 Thread / 0.561" Knurl / 0.333" Shoulder / 2.374" Length. *Front or Rear fitment. Two sets need to be purchased to replace studs on all 4 wheels. Please verify fitment compatibility prior to ordering..
  • BENEFITS: High-Grade 3/4" longer than factory studs designed to facilitate proper installation of aftermarket wheels & tires and/or wheel spacers..
  • UNIVERSAL TIRE VALVE STEM CAPS: Included with purchase are 4 Universal Tire Valve Stem Caps precision CNC machined from Light-Weight T6 Billet Aluminum with anodized surface and rust & water-resistant polymer thread inserts to prevent rust, corrosion, and chemical damage..
Check Stock