Categories

Best Billiard Cue Holder

Vrisa Pool Stick Holder Pool Table Accessories Pool Cue Holder Rack Billiard Cue Racks Set Cue Stick Holder Floor Stand Billiard Accessories Wood Billiard Cue Sticks Holds 6 Pool Cue Sticks Black

  • 【Partition Storage】This pool cue rack has several separate space for 6 cue sticks, a group of balls and a triangle or diamond billiards rack. The partition storage is convenient for you to take and store, more convenient and tidy..
  • 【Applicable to Multiple Scenarios】This billiard stand is suitable for various occasions. Whether you are playing billiards in the game room, club, garage, or bar or restaurant, you can use this Billiards Pool Stick Holder to organize cue sticks and balls. This will make your billiards room look better and more professional..
  • 【With Drink Pads】There are three special drink holders on this billiard rack. If you put your drink on the billiard table, there could have a mess waiting to happen. Using our billiard cue rack set can well avoid this problem..
  • 【Storage and Decoration】The billiard cue rack set stand does not need to be punched to damage the wall. This pool cue holder is perfectly matched with the billiards table, adding the characteristics of the billiards room. And your friends will be impressed by the beautiful, fashionable and eye-catching pool stick holder..
  • 【Easy to Install】The package of the pool table accessories contains all the accessories and installation instructions required for installation....
Check Stock

Frjjthchy 12 Pool Billiard Rack Wood Cue Racks Floor Pool Cue Organizers/Stand (Brown)

  • Large Capacity Storage: 12-hole storage space, as well as space on the bottom plate and upper plate can be placed with a handy book, cup and key mobile phone, convenient for storage and daily life..
  • Size: The bottom of the billiard cue holder is 13.4 inches in diameter, 23.62 inches high, and the diameter of the single hole is 1.38 inches. It can basically accommodate all sizes of billiard cue. The triangular design can be conveniently placed in the corner and save space..
  • Waterproof Cue Racks: Made of wooden board, durable, healthy painted on the surface, waterproof and environmentally friendly, not easy to leave scratches, can be used indoors and outdoors..
  • Elegant and Multifunctional: Glossy surface, smooth lines, and arc-shaped triangle structure, suitable for home billiard hall gymnasium, both practical and decorative, not only can store billiard cue can also store fishing rod..
  • Easy to Install: This billiard cue rack is convenient and easy to install, without any tools, even if you don't know how to install it, don't worry, we will attach a detailed installation manual with the billiard cue rack..
Check Stock

GSE Billiards Pool Stick Holder, Corner-Style Floor Stand Billiard Pool Cue Racks with Score Counters, Wood Billiard Cue Sticks Holds 8 Pool Cue Sticks a Full Set of Balls(Mahogany)

  • 100% Solid Wood: The pool stick rack is made of 100% solid wood, sturdy and durable. Measures 14"W x 14"D x 21.5"H. (The order includes cue rack only, the pool cues and balls not included).
  • Muti-Use: Our pool stick holder will hold 8 x billiard cue sticks, 16 pool balls ,the pool cue rack top has a inset scorener and 4 cup holders, so you'll never have to lean them against the wall or store them under the table again..
  • Easy To Install: This pool cue racks are easy to assemble without any tools, pool stick holder floor stand, no need to damage the wall by punching. even if you don't know how to install it, don't worry, we will attach a detailed installation manual with the billiard cue rack..
  • Features: Pool cue holes with rubber rings protect your pool cues from scratches. the rubber drink holders on our pool racks keep your sipping safe. the concave surface on the bottom holds the billiard balls in place and keeps them neatly arranged. score counters at the top for easy scoring..
  • Save Space: The pool stick holder floor stand perfect for small spaces, the cue rack was designed in a triangular shape, it can fit into any corner, saves a lot of space and enables you to have a more professional billiard room to playing pool games..
Check Stock

GACCO BILLIARDS Pool Cue Rack Hold up to 8 Sticks & Billiard Accessories. Floor Stand Pool Cue Stick Holder Made of 100% Solid Hardwood.(Traditional Mahogany)

  • WOODEN: Wooden material makes the billiard pool cue table holder become strong, sturdy, stable structure. NO MDF.NO PARTICLE BOARD. Craft finish in classic oak, traditional mahogany & black that highlight matching any game room. Provided hook with 2 screws and pre-drill underside. Simply assemble required.
  • MULTIFUNCTIONAL: Keep safe your billiards cue stick by the deluxe soft rings and also place your drinks on the beverage mats on the top piece. Easily access 2 table pool ball racks at the ball rack hook. Effectively accomodate the 16 balls size 2-1/4’’ on the ball slot on the bottom level..
  • SAVING-SPACE & ORGANIZED: This design not only provides a storage solution for your pool cue rack accessories but also sits nicely out of the way of any 90- degree corner near the pool table, ready for your action. Essential for any game room. Arrange neatly, practically but quite decorative. This 8-pool cue rack billiard holder appears elegant as a furniture piece to store your billiards accessories..
  • DIMENSION: Pool cue holder floor stand dimensions (H x W x D): 56.5 cm x 36.5 cm x 36.5 cm.
Check Stock

XCSOURCE Pool Stick Holder, 2-IN-1 Pool Cue Rack & Ping Pong Paddle Holder, 100% Solid Pine Wood Wall Mount Holds Billiards and Table Tennis Accessories for Man Cave, Billiard Room, Game Room,Bar Room

  • 【KEEP GAME ROOM ORAGNIZED】Our wall pool stick holder is a stylish way to keep your billiard room organized and out of the way. This pool cue rack will hold 6 cues, 16 pool balls, 4 ping pong paddles, 8 ping pong balls, 3 triangles or diamond billiard ball racks, chalk and brush. Organize all your billiard & table tennis accessories..
  • 【SOLID WOOD & STURDILY BUILT】Made out of 100% solid pine wood and stained into a black finish, this pool cue holder is sturdily built and sure to last you a long time. This makes it easier to keep all the balls and cues safe..
  • 【SAVING SPACE】Using a wall-mounted pool cue rack to hold your cues is a great way to store all your pool table accessories without taking up valuable floor space when billiard room space is limited, this gorgeous 2-in-1 pool and table tennis combo wall mount rack saves space and keeps your game room neat and tidy..
  • 【STUNNING DESIGN】 Decorate your man cave with natural, elegant and eye-catching billiard cue racks, Impress all your buddies. This cue stick holder meets all your needs for playing pool, table tennis and adds to the character of the game....
Check Stock

WEISHENG 4pcs Billiard Pool Cue Stick Plastic Slip-On Portable Moosehead Bridge Head White,Black

  • The billiard cue holder is Made from durable plastic,and can ensure long-term use..
  • Durable pool billiard cue bridge head slides over any pool cue, instantly converting it into a bridge rack..
  • Portable and light weight, easily fits in your billiard cue case or your pocket.
  • Moose head shape which provide 9 different angles.
Check Stock

Alomejor 2pcs Billiard Chalk Case Non Slip Cue Tip Chalk Billiard Pool Cue Chalk Holder with Cord for Snooker Pool Replacement Black

  • ?LUBRICATE CUE TIP?This cue tips chalk holder can help you lubricate cue tip without smudging your hands. A must for billiard lovers..
  • ?WITH A CORD?This billiard chalk case with a cord for easy hanging on bag or other objects. A wonderful gift for your family and friends, very....
  • ?EASY TO USE? Remove the old tips using razor or knife, scuff the cue tips via sandpaper, put A small super glue to hold the new tips. Fine cutting,....
  • ?GOOD PERFORMANCE? This snooker chalk holder is Soft and can help you have good performance when playing billiard.Easy to use and great for DIY your....
  • ?NEVER LOSE?A great way not to lose the chalk or get your hands dirty. Cord allows you to attach it to tables no more misplaced chalk.
Check Stock

Skylety Retractable Billiard Cue Stick Bridge with Bridge Head, Billiard Pool Cue Accessory for Pool Table, Plastic Bridge Head (Black)

  • Retractable billiard cue bridge kit: you will receive 1 piece of billiard cue bridge with 3 pieces of removable brass bridge head, which allows you to extend from 35 cm/ 14 inches to 150 cm/ 59 inches, suitable for most kinds of billiard cues.
  • Replaceable 3 types of bridge head: there are 3 types of bridge heads, including high, low, and cross, all made of brass, and the surface has a polished finish to ensure an easy and smooth slide.
  • And the bridge is equipped with rubber feet, which can protect your pool table and prevent sliding on the pool table, making you nicely control the route.
  • In addition, the bridge head can be rotated to be removed and replaced with another bridge head.
  • Comfortable touch: the handle of this pool bridge stick is made of stainless steel and comes with a sponge handle cover, which features a comfortable touch and is easy to hold, suitable for long time use.
  • Provides different shot positions: the bridge head of the billiard cue holder can offer different shooting positions, allowing you to adjust the stick length, cue height and placement by yourself, and then play a good shot.
Check Stock

Retractable Billiards Cue Stick Bridge with 3 Pieces Removable Brass Bridge Head, Billiards Pool Cue Accessory for Pool Table (Silver)

  • What you receive: package comes with 1 piece billiard cue bridge, which can extend from 35 cm/ 14 inch to 140 cm/ 55 inch, suitable for most kinds of billiard cues.
  • Adjustable size can meet your daily needs and you can use it with confidence.
  • Replaceable bridge head: the bridge head of this billiard cue holder is made of plastic, smooth enough to ensure an easy and smooth slide.
  • You don't need to install any screws and the bridge head can be installed or removed just by rotating.
  • Comfortable handle: the handle of this pool bridge stick is made of stainless steel and solid wood, featuring a comfortable touch and holding easily.
  • Durable materials ensure a long time usage.
  • Provides 5 shot positions: the bridge head of retractable bridge stick can offer 5 shooting positions, allowing you to adjust the stick length, cue height and placement by yourself, thus you can play a nice shot easily.
  • Wide range of applications: this retractable billiard cue bridge is suitable for using when pool stick as a bridge doesn't provide the good angle or length, or when a shot is too far to rea....
Check Stock

CUESOUL SOOCOO Series Pool Cue + Cue Case + Cue Gloves + Cue Chalk + Cue Joint Protector + Cue Towel + Cue Tip Tool

  • WEIGHT ADJUSTABLE:58inch,19oz maple pool cue,cue weights will vary..
  • SHAFT:A++ canadian maple pool cue shaft,shaft construction designed to eliminate deflection for improving accuracy,easyer to control the billiard cue ball..
  • BUTTE:selected canadian maple wood with Luxury Pearl White finish,stainless steel Bottom ring with durable rubber bumper,offering maximum protection for each cue butt..
  • HIGH-QUALITY ORIGINAL COWSKIN:11.5mm cue tip,High-quality original cowskin cue tip,nice grip when hit on the cue ball.Stainless Steel Collar + Stainless Rocket Pin,easy for concatenation tighten the cue shaft and never lose.
  • WHAT YOU GET:1*Pool Cue + 1*1*1 Cue Case + 3*Billiard Cue Chalks + 1*Cue Cleaning Towel + 1*Cue Tip Tool Pick + 1*Billiard Glove,you get most necessary billiard accssories when playing cue,choice for billiard cue player..
Check Stock

GACCO BILLIARDS Pool Cue Stick Holder Wall Mount Pool Cue Holder Billiard Cue Rack For Pool Table Accessories Pool Table Stick Holder Wall Mount Made Of 100% Solid Wood Mahogany 8-Cue

  • WOODEN: Natural wooden material makes this cue rack strong, sturdy, stable structure. Available in classic oak, traditional mahogany & black finish that highlight matching any game room. NO MDF.NO PARTICLE BOARD.
  • DECORATIVE: This 8-pool stick holder not only provides effective storage solution for your cues & full set of billiard accessories but also sits nicely as the piece of furniture on your wall near the pool table. Provided concealed mounting hardware. Fit standard 16-inch wall studs.
  • MULTIFUNCTIONAL: Hold billiard cue sticks at any size, prevent from damage by large size clips & round cue sliders. Easily access 2 pool table ball racks at the pool ball rack hook. Effectively accommodate set of 16 2 ¼’’ billiard balls, brush, chalk, bridge on 5 levels.
  • ORGANIZED: This wall mount cue rack can fit anywhere in your game room, space-saving but serving a practical purpose..
  • DIMENSION: 28.75" x 28" x 2.75".assembly acquired. CUE RACK ONLY. Billiard accessories for illustration purpose.
Check Stock

GACCO BILLIARDS Floor Pool Cue Rack Hold 9 Cue Sticks & Billiard Accessories Corner Stand Pool Cue Holder Made of 100% Solid Hardwood with Billiard Scorer.CUE RACK ONLY Black

  • WOODEN: Natural wooden material makes this cue rack strong, sturdy, stable structure for a long-lasting life. Available in classic oak, traditional mahogany & black finish that highlight matching any game room. NO MDF.NO PARTICLE BOARD.
  • DECORATIVE: This 9-pool stick holder not only provides effective storage solution for your cues & full set of billiard accessories but also sits nicely as the piece of furniture near the pool table..
  • MULTIFUNCTIONAL: Hold up to 9 billiard cue sticks at any size, prevent from damage by the soft rings & round non-slip feet. Easily access the triangle & diamond ball racks at the pool table ball rack hook. Effectively accommodate set of 16 2 ¼’’ billiard balls, billiard accessories. Placing your drinks on the beverage mats. Easily keep your score during the match by the counter.
  • ORGANIZED: This floor corner cue rack can fit anywhere in your game room, space-saving but serving a practical purpose.
  • DIMENSION: Provided hardware. 27.15" x 28.75" x 8.65" assembly acquired. CUE RACK ONLY. Billiard accessories for illustration purpose.
Check Stock

GSE Floor Stand Billiard Pool Cue Racks Only Holds 10 Pool Cue Sticks 2 Drink Holders Billiard Ball Racks and Full Set of Pool Balls Mahogany

  • MATERIAL: The cue rack holder is made of solid wood, furniture grade paint finish, sturdy and durable..
  • SIZE: The cue stick holder measurements are 29.5"L x 9"W x 31.25"H..
  • MUTI-USE: The pool stick stand cue rack holds up to 10 pool cues, a full set of pool balls, 2 beverage cup holes and have 2 metal hooks can hang pool ball racks..
  • FEATURES: Pool cue holes with rubber rings protect your pool cues from scratches. The rubber drink holders on our pool racks keep your sipping safe. The concave surface on the top holds the billiard balls in place and keeps them neatly arranged. Metal hooks on both sides for easy hanging of billiard ball racks..
  • INCLUDED: The order includes cue rack only. Pool cues and balls and rack not included. Some simple assembly required..
Check Stock