Categories

Best Bimetal Bushing

Reotemp K82P-7 Large Dial Easy Read Pocket Thermometer, -10/110 Celsius, 2\ Dial, 5\ Stem, Waterproof

  • Reliable and Rugged - For a variety of uses: A/C testing, dark room, food inspection, science class, laboratory and thousands of other uses..
  • Quick Response - A combination of responsive bimetal element and thin stem make our pocket thermometer quick to respond..
  • Waterproof and Dustproof - Hermetically sealed dial makes it easy to clean and will not fog up if rinsed off. Comes with a pocket protector for storage..
  • Sensitive Bimetal Element - Accurate to ±1.8 degrees Celsius, this thermometer has a quality bimetal coil that comes calibrated and ready to go..
  • 304 Stainless Steel & Glass Construction - Quality construction ensures our pocket thermometer will last long term..
Check Stock

Karcy Normal Closed Bimetal Temperature Control Switch Thermostat 70 Celsius N.C KSD9700 Pack of 12

  • KSD9700 product is a kind of thermostat which adopt the bimetal head as the temperature sensing element..
  • The bimetal head is in free state and the contacts are closed when the electrical appliance is working in normal condition..
  • When the ambient temperature raises to the preset operating temperature, the contacts close as the plastic head deforms to jump when being heated, then the circuit is cut off to control the temperature . Then the contacts will close automatically to cut on the circuit when the electrical appliance is cooled down to the reset temperature..
  • Widely used in home appliance's motor and electrical equipment, such as air conditioner motor, transformer, thermal appliances, etc.
  • Package Content: pack of 12pcs 70 Celsius temperature control switch.
Check Stock

uxcell Electric Oven Thermostat, Adjustable Bimetal Rice Cooker Heating Temperature Controller, 15-20A Normal Close N.C

  • 【NORMAL CLOSE & 250V 15-20A】Rice cooker thermostat contact type is normal close N.C.The operating voltage and current is 250V 15-20A,4mm screw hole diameter.
  • 【COPPER CONTACT】Electric oven temperature limiter sensor has copper contact,high temperature resistance,good thermal conductivity and good electric conductivity.
  • 【ADJUSTABLE TEMPERATURE】If the operation temperature needs to be raised, the screw can be rotated counterclockwise.
  • if the operation temperature needs to be lowered, the screw can be rotated clockwise.Users can adjust them appropriately according to their own needs.
  • 【BIMETAL THERMOSTAT】Rice cooker temperature controller is with bimetal strip.Deformation of bimetal strip by heat effect, push thermostat to turn on-off electric contacts, control power supply and temperature of electric appliances.
  • 【WIDELY APPLICATION】Electric oven temperature controller is widely used in elextric heater, electric iron, rice cooker, toaster, fat fryer, warm electric light, oven and so on.
Check Stock

Fewb Bi Metal Temperature Gauge, 0-120 ℃ Thermometer Round Type Gases Steam Thermometer with Extension Cord for Hot Water, Boilers, and Pipes, Pocket Grill Temperature for Incubators

  • Industrial Use: Bimetal thermometer is a kind of industrial instrument suitable for measuring medium and low temperature for field testing. Can be used to directly measure the temperature of gases, liquids and steam..
  • Send Control Signal: With electric contact bimetal thermometer, and can automatically send a control signal to cut off the power or alarm when the working temperature exceeds a given value..
  • and Easy to Read: Bimetallic thermometer has the advantages of , easy to read, robust and vibration resistant, can replace the industrial glass thermometer, widely used in industry and scientific research departments..
  • Response Speed: Bimetal thermometer also has the characteristics of quick response speed, small size, good linearity and more stable, which can make the user's work efficiency faster..
  • Applicable Scenarios: Mini, durable and portable enough to save space and carry around. Designed for accurate temperature readings, it is ideal for reptiles or plant glass containers, incubators, greenhouses or other pet animal applications..
Check Stock

W10225581 Refrigerator Bimetal Defrost Thermostat for Whirlpool KitchenAid Kenmore Replace WPW10225581 AP6017375 PS11750673 PS237680,2321799

  • W10225581 Refrigerator Bimetal Defrost Thermostat for Whirlpool KitchenAid Kenmore Replace WPW10225581, AP6017375, PS11750673, PS237680,2321799.
  • Replacement Bimetal Defrost Thermostat used on For some Amana, Crosley, Estate, Ikea, Inglis, Jenn Air, Kenmore, KitchenAid, Magic Chef, Maytag, Roper....
  • replaces part number: WPW10225581, WPW10225581V ,W10225581, W10260437,AP4511066, 2321799, 2321802, 2319914, 2188824, 2315504, 1872722, 2149849,....
  • Suitable for the following situations: Fridge too warm,Freezer section too warm,Frost buildup,Fridge and freezer are too warm,Too warm ,Freezer not....
Check Stock

Hacksaw Replacement Blades (10 Pack) High Speed 24 TPI - 12\ Length Hack Saw Blade - Carbon Strength Steel - Industrial Premium Grade

  • Virtually unbreakable (shatterproof) bimetal blades for superb cutting performance, wear resistance and safety.
  • Cuts through all types of materials including alloy and stainless steel.
  • Contains three 12-inch (300mm) Bimetal blades.
  • Compatible with the majority of Hacksaws.
  • Eclipse Predator blades feature precision ground teeth with a positive rake angle and a smooth gullet for effective meterial removal, creating a more aggressive and faster cut and a blade that stays sharper for longer..
Check Stock

OEMTOOLS 27212 Manual Bushing Installation and Removal Tool Set, Bushing Removal Tool, Bearing Press Kit, Bushing Tool Kit, Tool Kit Push Pull Bushing

  • EASY TO USE: The bushing puller kit cuts down on frustration and expended energy during difficult wheel bearing, suspension bushing, and seal removal and installation repairs.
  • WIDE RANGE OF USE: The adapter cups with the bearing puller set provide a wide range of options to fit your exact repair needs.
  • The OEM Tools bushing driver set includes 20 different size cups for versatile use.
  • ELIMINATE DAMAGE: The metric bushing driver set reduces the possibility of damaging the bearing/suspension housings.
  • Don’t have to remove components from vehicles with this bushing tools set.
  • ADAPTABLE: The bushing installer kit comes with an adapter to use bushings with shop press.
  • Plates and sleeves can be used in a standard workshop press when on-site access isn’t possible.
  • MORE USES: The bushing tool set works with silent bearings, hydraulic bearings, ball bearings, shaft seals, rubber bearings, and more.
  • Cups with bushing press and pull kit allow for hundreds of combinations.
Check Stock

Michigan Motorsports LS1 Rocker Arms with upgraded Bronze Bushing Trunion Kit 4.8 5.3 5.7 6.0 LS1 LS2

  • LS Rocker Arms with Bronze Bushing Style Bearing Trunions Professionally Installed.
  • Included: 16 New LS Rocker Arms with Bushing Style Bearing Trunions Professionally Installed and 16 Alen Head Bolts..
  • Whether you have a stock LS motor or a highly modified LS motor, replacing your rockers with upgraded Trunion Kit is highly recommended. The stock bearings have a tenancy to fail. These rocker arms are a must have for any aggressive heads and cam combo. LS Rocker Arms feature our BUSHING TRUNNION KITS. The Bushing bearing operate smoother and can operate at a higher RPM than even the caged bearing style upgrade..
  • The bushing design provides superior lubrication to the trunnion while also providing maximum load capability. Our innovative design prevents premature failures caused by the weak O.E. or replacement needle bearings, eliminating the possibility of debris from a bearing failure that can cause severe engine damage. Our special C932 bushing material is bathed in oil via grooves at 2 different locations on the trunnion..
  • These channels constantly feed oil to the bushing surface ensuring proper lubrication. The greater surface of our bushed trunnion will support 300 times more load than a needle bearing trunnion. Our bushing gets mo....
Check Stock

Hex Bushing 1 Male x 1/2 Female Brass for Repair Threaded Pipe Fitting Pack of 1

  • ENHANCED QUALITY BRASS Makes Hex Bushing Resistant to Corrosion and Safe for High Temperatures.
  • CONVENIENTLY DESIGNED TO CONNECT Pipes or Fittings of Different Diameter, Material, and End Type. Our Metal Hose Vacuum Gauge Hex Bushing have 1" Male....
  • RELIABLE FITTING of the Bushing Reducer is Provided by the Well-Machined Threads and the Relative Softness of the Brass that Enables Tighter Sealing.....
  • UNIVERSAL – our Hex Bushing can be easily Used with Water or Oil for Plumbing Applications, for Various Measurable Devices, Collectors, etc.
  • DURABLE –Our Hex Bushing don’t Deform with Time, unlike Traditional Stainless Steel Thread Bushing or Plastic Pipe Fittings. N.
Check Stock

Michigan Motorsports LS1 Rocker Arms with upgraded Bronze Bushing Trunion Kit Includes LS1 Rocker Arm Support Pedestal Stands Pair 4.8 5.3 5.7 6.0 LS1 LS2

  • LS Rocker Arms with Bronze Bushing Style Bearing Trunions Professionally Installed includes LS1 LS2 LS3 LQ9 LQ4 Rocker Arm Support Pedestal Stands.
  • Included: 16 New LS Rocker Arms with Bushing Style Bearing Trunions Professionally Installed and 16 Alen Head Bolts and Pair of Rocker Arm Support Pedestal Stands ..
  • Whether you have a stock LS motor or a highly modified LS motor, replacing your rockers with upgraded Trunion Kit is highly recommended. The stock bearings have a tenancy to fail. These rocker arms are a must have for any aggressive heads and cam combo. LS Rocker Arms feature our BUSHING TRUNNION KITS. The Bushing bearing operate smoother and can operate at a higher RPM than even the caged bearing style upgrade..
  • The bushing design provides superior lubrication to the trunnion while also providing maximum load capability. Our innovative design prevents premature failures caused by the weak O.E. or replacement needle bearings, eliminating the possibility of debris from a bearing failure that can cause severe engine damage. Our special C932 bushing material is bathed in oil via grooves at 2 different locations on the trunnion..
  • These channels constantly feed oil to the bushing surface ensuring proper lubrication. The greater sur....
Check Stock

Bushing Fix UP1KIT - Transmission Shift Cable Bushing Repair Kit

  • Kit includes replacement bushing and application specific installation tools..
  • Text and video instructions along with tech support make installation very easy..
  • Used by many transmission and service professionalsDescriptionThe transmission shift cable linkage kit allows you to quickly and easily repair your shift selector cable by replacing the bushing or grommet. The patent pending coupling and custom molded replacement bushing ensure a quality repair with ease. A professional can perform this repair in under 10 minutes, average time for a non-professional is less than 25minutes. This bushing is made from a material that was designed to outlast the factory bushing and includes everything needed to install. The kit includes DIY instructions, custom molded bushing, and patent pending installation tools. Works in 4T40-E, 4T45-E, and 4T65-E transmissions. This kit fits the following vehicles: Chevrolet Uplander.
Check Stock

GreatNeck 615C Midget Hacksaw Blades, 5 Piece | Designed to Cut Metal, Pipe, and Hard Woods, in Close Quarters | Midget Hacksaw Blades Fit Most Standard 6” Adjustable Frame Hacksaws

  • 2 pack Bi-Mental Hacksaw Blades: Package comes with 24 TPI hacksaw baldes 2 pack..
  • BiMetal Saw Blades: HSS Spring steel with BiMetal material to get flexible, shatter resistant and long life of tough cutting.
  • Replacement Hacksaw Blades: 12 Inch (300 MM) Bi-Metal hacksaw frame blades 12" Length 0.025" thick x 1/2" width. Fits Most Hacksaw Frames..
  • Wavy set teeth and double layer design to get professional grade for maximum cutting.
  • Suitable for cutting steel, piping, wood, and other metal and non-metal materials!.
Check Stock

Frienda Magnetic Top Thermometer Wood Stove Thermometer Stove Temperature Meter Stove Flue Thermometer for Avoiding Stove Fan Damaged by Overheat 1

  • What you receive: you will get 1 piece magnetic top thermometers, which can help you make a good control of stove temperature, enough for you to use....
  • Practical helper: with this stove temperature meter, you don't need to worry that you don't know the accurate temperature, and it can help you avoid....
  • Nice material: our stove flue pipe thermometer is consist of aluminum dial, bimetal thermometer sensor, brass pointer and metal handle, sturdy and....
  • Clear to judge: the dial of thermometer includes 3 parts, cool, target, too hot and the measuring range is 100-700°F, so it provides you an accurate....
Check Stock