Categories

Best Bimetal Hole Saws

Utoolmart 95mm Diamond Grit Hole Saw Drill Bit for Glass Ceramics Porcelain Ceramic Tile 1Pcs

  • 【Material】- The hole saws are made of diamond and high carbon steel, offering a combination of hardness and toughness for wear resistance..
  • 【Efficiency】- Small incision resistance,feature drilling stably, fast speed, not breaking the border Opening neat, smooth, no broken edges, no....
  • 【Advantage】- Side holes allow for easy slug removal after drilling. Perfect for cutting accurate holes in a wide variety of materials such as....
  • 【Feature】Diamond coating maximizes performance and retains a sharper cutting edge than traditional carbide or bimetal hole saws..
  • 【Wide Application】- Diamond hole saw drill bit can be used with a standard electric drill Cut perfect circles with these tools, Suitable for....
Check Stock

CALIDAKA Drill Dust Collector Hole Saw Dust Bowl Drill Ash Bowl Drywall Dust Collector Shockproof Dust Catcher Hole Saw Dust Catcher for 0.63-4.92inch Hole Openers

  • MINIMIZE MESSES: When you have this drillers dust bowl on hand at your commercial, residential or industrial worksite, you can minimize messes as the bowl collects saw dust and messes while drilling large diameter holes..
  • INTERIOR TOOL: Eliminat e the need to vacuum or even don face mas-k-s and goggles when you can use this drillers dust bowl that collects saw dust when installing recessed lighting fixtures..
  • Suitable for: bimetal hole saws, glass hole saws and other hole saws whose handle diameter does not exceed 10mm/0.39 inches and the handle length exceeds 20mm/0.79 inches..
  • SIMPLE ATTACHMENT: Easily attach this saw dust collector that fits seamlessly between cutting tools and the drill’s chuck. The drillers dust bowl forms a seal to the surface of the material and allows you to encapsulate all debris..
  • NO CEILING MARKS: You don’t have to worry about damaging ceilings or wall materials when using this drillers dust bowl that collapses like a plunger when sealing to the surface. The best part is that it does not leave ceiling marks..
Check Stock

Diamond Drill Bit Glass Drill bit for Tile Marble Granite Fiberglass Ceramic Tool Drill Bit Set 5 Pack | 5/32” – ½”

  • Glass drill bit Perfect set for cutting accurate holes in a wide variety of materials such as glass and ceramics.
  • Nickel plating on these bits maximizes your tool’s life with great resistance to corrosion.
  • Diamond Drill Bit coating maximizes performance and retains a sharper cutting edge than traditional carbide or bimetal hole saws.
  • Diamond grit hole saw drill bit side holes allow for easy slug removal after drilling.
  • Sizes include: 5/32”, ¼”, 5/16”, 3/8”, and ½” with a cutting depth of ¾”and ¼” shank.
Check Stock

1/2" Inch Diamond Drill Bit Hole Saw for Tile Glass Marble Granite Fiberglass Ceramic Tool (5 Pack)

  • Diamond coating maximizes performance and retains a sharper cutting edge than traditional carbide or bimetal hole saws.
  • Side holes allow for easy slug removal after drilling.
  • Perfect set for cutting accurate holes in a wide variety of materials such as glass and ceramics.
  • Nickel plating on these bits maximizes your tool’s life with great resistance to corrosion.
Check Stock

uxcell 2pcs 35mm Diamond Drill Bit Hole Saw for Watt Glass Marble Fiberglass Ceramic Tool

  • Diamond coating maximizes performance and retains a sharper cutting edge than traditional carbide or bimetal hole saws..
  • Nickel plating on these bits maximizes your tools life with great resistance to corrosion..
  • Side holes allow for easy slug removal after drilling..
  • Suitable for cutting accurate holes on glass, ceramics, porcelain, ceramic tile, porcelain tile etc.. Not suitable for drilling tempered glass, plastic and wood..
  • Please use at low drill speeds and drill pressure. Always work with coolant (water) when drilling. Not suited for use on concrete or for depths beyond about 1/2 inch..
Check Stock

DEWALT DW1803 Heavy Duty 7/16-Inch Shank Quick Change Mandrel (Fits Hole Saws 1-1/4-Inch - 6-Inch)

  • DW1810 offers tool-free quick-release collar to prevent hole saws from locking to the mandrel.
  • DW1803 and DW1805 offer spring-loaded collar that automatically engages drive pins to prevent hole saws from locking to the mandrel.
  • All quick change mandrels feature double set screws with a recessed combination head for quick and easy centering bit changes.
  • All quick change mandrels utillize hardened steel construction and have been tested through 15,000+ cycles to deliver jobsite durability.
  • DEWALT offers a full range of standard and quick change mandrels for versatility in a wide range of hole saw applications.
  • DEWALT offers a full range of standard and quick change mandrels for versatility in a wide range of hole saw applications..
Check Stock

DIABLO Bi-Metal and Carbide Tipped Hole Saw Set (9-Piece)

  • The Diablo 9-Piece Hole Saw Kit features five hole saw cups (bi-metal and carbide tipped) and Diablo's four piece SnapLock PLUS mandrel system for quick and easy hole saw cup changes for maximum job performance. This new, high performance hole saw set delivers faster cutting performance and increased productivity versus standard bi-metal and carbide-tipped hole saws. Unlike anything on the market, Diablos hole saws and SnapLock Plus mandrel system simplify the attachment process for fast and efficient hole saw mounting. These radical new hole saws provide ultimate cutting length to bore deeper holes in a single pass.
  • and tool-free plug ejection and Variable Tooth Design for faster cuts..
Check Stock

uxcell Electric Oven Thermostat, Adjustable Bimetal Rice Cooker Heating Temperature Controller, 15-20A Normal Close N.C

  • 【NORMAL CLOSE & 250V 15-20A】Rice cooker thermostat contact type is normal close N.C.The operating voltage and current is 250V 15-20A,4mm screw hole diameter.
  • 【COPPER CONTACT】Electric oven temperature limiter sensor has copper contact,high temperature resistance,good thermal conductivity and good electric conductivity.
  • 【ADJUSTABLE TEMPERATURE】If the operation temperature needs to be raised, the screw can be rotated counterclockwise.
  • if the operation temperature needs to be lowered, the screw can be rotated clockwise.Users can adjust them appropriately according to their own needs.
  • 【BIMETAL THERMOSTAT】Rice cooker temperature controller is with bimetal strip.Deformation of bimetal strip by heat effect, push thermostat to turn on-off electric contacts, control power supply and temperature of electric appliances.
  • 【WIDELY APPLICATION】Electric oven temperature controller is widely used in elextric heater, electric iron, rice cooker, toaster, fat fryer, warm electric light, oven and so on.
Check Stock

Winegard RPSK83 Replacement IDU

  • 8pc Tungsten-Carbide Grit Hole Saws Specification This Industrial Quality Hole Saws Kit Is.
  • And Accurate Holes In Many Types of Hard Materials..
  • These Saws Can Be Able To Cut/drill Through Bricks.
  • Blocks Up To 2 Thick !!! They Are Made By Machined Carbon Steel With C2 Tungsten Carbide".
  • Grit Cutting Surfaces. Features: provides Easily Through-hole Drilling fits On Most Elec.
Check Stock

Chainsaw Chain Saw Cut Cutting Sawing Wood Tree Forest Horror Halloween Powertools Woodcutter Motor Rev Revving Sound Effects Sound Effect Sounds EFX Sfx FX Tools Power Tools - Chainsaws [Clean]

  • GET THE COMPLETE HOLE SAW KIT: Upgrade your woodwork, craft and power drill equipment with this complete hole saw bundle that includes 8 high carbon steel hole saws, a mandrel, a hex key and case..
  • THE SIZES OF THE HOLE SAW SET: The diameters of the 8 hole saw cutters are 1", 1-1/4", 1-1/2", 1-3/4", 2", 2-1/8", 2-1/4", and 2-1/2", and they have a cutting depth of 1 inch..
  • FLAWLESS PRECISION DRILLING: Thanks to their high speed steel teeth and smooth cutting edges, these hole saws can cut through wood, PCV and plastic with high precision and create super clean cuts..
  • BUILT TO LAST A LIFETIME: Made with premium quality carbon steel and a nickel-plated coating, these drill hole saws are impact and wear resistant, durable and robust..
  • KEEP EVERYTHING ORGANIZED: This 10-piece power drill hole saw set comes in a practical, portable case that allows you to keep the drill hole saws organized and within easy reach when needed..
Check Stock

Bosch HSBIM9 General-Purpose 9 pc. Bi-Metal Hole Saw Kit

  • All-in-one kit – features two SpinLOCK Universal arbors, steel pilot bit and six hole saws with Progressor tooth design.
  • SpinLOCK universal arbor – fits all brands and sizes to simplify diameter changes with fast plug removal and tool-free install.
  • The pilot bit – designed to start holes in a variety of materials.
  • Progressor tooth design – hole saws feature alternating teeth size for performance, cutting faster and lasting longer in wood, metal and plastic materials.
  • Durable hole saw material – hole saws are made with 8% cobalt alloy.
Check Stock

Ryker Hole Saw Kit with Arbors and Replacement Drill Bits, Heavy Duty Steel Construction for Boring Wood, Aluminum, Metal, or PVC, Plumbing and DIY Carpentry (Bi Metal - Metal Hole Saw Kit)

  • General Purpose Bi-Metal Hole Saw Set This professional-grade hole saw kit for construction, woodworking, plumbing, and DIY carpentry includes versatile tools for drilling or boring holes including 7 hole saws, arbors, and replacement drill bits..
  • Ultra-Sharp Steel Teeth Our metal hole saws are designed with strong, precision cobalt steel to withstand heavy-duty use on metal, wood, PVC pipes, drywall, plywood, sheet metal, aluminum, plastic, pipes, and other non-ferrous materials..
  • Optimized Hole Saw Cutting Sizes Not every job needs the same size hole which means you need a quick solution to get the job done right the first time. We included 25/32, 1, 1 , 1 9/16, 1 , 2 3/8, and 2 11/16 saws in every tool kit..
  • Low RPM to High-Torque Reliability We use long-lasting cobalt steel in our hole saws to ensure smoother drilling and boring on almost any surface. That makes them ideal for plumbers working with a variety of different metals and materials..
  • Compact, Protective Storage Case Every Ryker Hardware bi-metal hole saw set comes with a rugged storage case to help keep your tools neatly organized and protect them from weather and dirt on the jobsite. A smart choice for home or construction use..
Check Stock

MK Morse 139038-MKM 050326139038, multi, one size

  • Durable, heavy-duty, carbon steel arbors come complete with pilot drills.
  • Adapt Morse hole saws to any power drill used by professionals.
  • Hex arbors with non-slit jaw slots are positive drive.
  • SDS arbors are used in tools having SDS chucks, to drive hole saws in rotary hammers or hammer drills.
Check Stock