Reotemp K82P-7 Large Dial Easy Read Pocket Thermometer, -10/110 Celsius, 2\ Dial, 5\ Stem, Waterproof

  • Reliable and Rugged - For a variety of uses: A/C testing, dark room, food inspection, science class, laboratory and thousands of other uses..
  • Quick Response - A combination of responsive bimetal element and thin stem make our pocket thermometer quick to respond..
  • Waterproof and Dustproof - Hermetically sealed dial makes it easy to clean and will not fog up if rinsed off. Comes with a pocket protector for storage..
  • Sensitive Bimetal Element - Accurate to ±1.8 degrees Celsius, this thermometer has a quality bimetal coil that comes calibrated and ready to go..
  • 304 Stainless Steel & Glass Construction - Quality construction ensures our pocket thermometer will last long term..
Check Stock

Karcy Normal Closed Bimetal Temperature Control Switch Thermostat 70 Celsius N.C KSD9700 Pack of 12

  • KSD9700 product is a kind of thermostat which adopt the bimetal head as the temperature sensing element..
  • The bimetal head is in free state and the contacts are closed when the electrical appliance is working in normal condition..
  • When the ambient temperature raises to the preset operating temperature, the contacts close as the plastic head deforms to jump when being heated, then the circuit is cut off to control the temperature . Then the contacts will close automatically to cut on the circuit when the electrical appliance is cooled down to the reset temperature..
  • Widely used in home appliance's motor and electrical equipment, such as air conditioner motor, transformer, thermal appliances, etc.
  • Package Content: pack of 12pcs 70 Celsius temperature control switch.
Check Stock

uxcell Electric Oven Thermostat, Adjustable Bimetal Rice Cooker Heating Temperature Controller, 15-20A Normal Close N.C

  • 【NORMAL CLOSE & 250V 15-20A】Rice cooker thermostat contact type is normal close N.C.The operating voltage and current is 250V 15-20A,4mm screw hole diameter.
  • 【COPPER CONTACT】Electric oven temperature limiter sensor has copper contact,high temperature resistance,good thermal conductivity and good electric conductivity.
  • 【ADJUSTABLE TEMPERATURE】If the operation temperature needs to be raised, the screw can be rotated counterclockwise.
  • if the operation temperature needs to be lowered, the screw can be rotated clockwise.Users can adjust them appropriately according to their own needs.
  • 【BIMETAL THERMOSTAT】Rice cooker temperature controller is with bimetal strip.Deformation of bimetal strip by heat effect, push thermostat to turn on-off electric contacts, control power supply and temperature of electric appliances.
  • 【WIDELY APPLICATION】Electric oven temperature controller is widely used in elextric heater, electric iron, rice cooker, toaster, fat fryer, warm electric light, oven and so on.
Check Stock

Fewb Bi Metal Temperature Gauge, 0-120 ℃ Thermometer Round Type Gases Steam Thermometer with Extension Cord for Hot Water, Boilers, and Pipes, Pocket Grill Temperature for Incubators

  • Industrial Use: Bimetal thermometer is a kind of industrial instrument suitable for measuring medium and low temperature for field testing. Can be used to directly measure the temperature of gases, liquids and steam..
  • Send Control Signal: With electric contact bimetal thermometer, and can automatically send a control signal to cut off the power or alarm when the working temperature exceeds a given value..
  • and Easy to Read: Bimetallic thermometer has the advantages of , easy to read, robust and vibration resistant, can replace the industrial glass thermometer, widely used in industry and scientific research departments..
  • Response Speed: Bimetal thermometer also has the characteristics of quick response speed, small size, good linearity and more stable, which can make the user's work efficiency faster..
  • Applicable Scenarios: Mini, durable and portable enough to save space and carry around. Designed for accurate temperature readings, it is ideal for reptiles or plant glass containers, incubators, greenhouses or other pet animal applications..
Check Stock

W10225581 Refrigerator Bimetal Defrost Thermostat for Whirlpool KitchenAid Kenmore Replace WPW10225581 AP6017375 PS11750673 PS237680,2321799

  • W10225581 Refrigerator Bimetal Defrost Thermostat for Whirlpool KitchenAid Kenmore Replace WPW10225581, AP6017375, PS11750673, PS237680,2321799.
  • Replacement Bimetal Defrost Thermostat used on For some Amana, Crosley, Estate, Ikea, Inglis, Jenn Air, Kenmore, KitchenAid, Magic Chef, Maytag, Roper....
  • replaces part number: WPW10225581, WPW10225581V ,W10225581, W10260437,AP4511066, 2321799, 2321802, 2319914, 2188824, 2315504, 1872722, 2149849,....
  • Suitable for the following situations: Fridge too warm,Freezer section too warm,Frost buildup,Fridge and freezer are too warm,Too warm ,Freezer not....
Check Stock

Hacksaw Replacement Blades (10 Pack) High Speed 24 TPI - 12\ Length Hack Saw Blade - Carbon Strength Steel - Industrial Premium Grade

  • Virtually unbreakable (shatterproof) bimetal blades for superb cutting performance, wear resistance and safety.
  • Cuts through all types of materials including alloy and stainless steel.
  • Contains three 12-inch (300mm) Bimetal blades.
  • Compatible with the majority of Hacksaws.
  • Eclipse Predator blades feature precision ground teeth with a positive rake angle and a smooth gullet for effective meterial removal, creating a more aggressive and faster cut and a blade that stays sharper for longer..
Check Stock

DGOL 7 pcs Metal Domed Rivet Fixing Setting Tool Spike Rivets Setter

  • 7PCS TOOLS IN ONE PACKAGE,THEY ARE: 1PCS 6MM RIVET SETTER,1PCS 8MM RIVET SETTER,1PCS 10MM RIVET SETTER,1PCS DOUBLE SIDES BASE FOR 6MM AND 8MM RIVET,1PCS DOUBLE SIDES BASE FOR 8MM AND 10MM RIVET,1PCS 2.5MM HOLE PUNCH AND 1PCS 3.5MM HOLE PUNCH.
  • 6MM RIVET SETTER IS BETTER USED FOR 6MM RIVET,4MM,5MM RIVET NO PROBLEM.
  • 8MM RIVET SETTER IS BETTER USED FOR 8MM RIVET, 7MM RIVET NO PROBLEM.
  • 10MM SETTER IS BETTER USED FOR 10MM RIVET, 9MM RIVET NO PROBLEM.
  • 2 PCS BASE ARE BOTH DOUBLE SIDES BASES,ONE COULD BE USED FOR 6MM AND 8MM RIVET OR A BIT SMALLER,THE OTHER COULD BE USED FOR 8MM AND 10MM RIVET OR A BIT SMALLER.
  • THIS SET COULD NOT BE USED FOR SNAP BUTTONS,JUST FOR RIVETS,IF YOU NEED SETTER FOR SNAP BUTTONS,PLS SEARCH SNAP SETTER FROM OUR STORE"DGOL".
Check Stock

Rexka 50pcs Front Shield Bumper Cover Rocker Molding Rivet Headliner Retainer for BMW 1 2 3 5 7 Series 51111908077 E30 E36 E46 E34 E39 E32 E38 E31 X3 X4 X5 X6 Z4

  • Other Names: Package Tray Rivet, Upper Quarter Trim Rivet, Vent Grille Rivet, Housing Cover Retainer, Hood Bumper Rivet, Side Duct Rivet, Air Duct Rivet, Front Cover Rivet, License Bracket Rivet, Housing Cover Rivet, Front Trim Rivet, Insulation Rivet, Lower Deflector Rivet, Upper Center Pillar Trim Rivet, Cover Rivet, Frame Molding Rivet, Stone Guard Rivet, Upper Bracket Rivet,Lower Cover Rivet, Face Bar Rivet, Lower Trim Panel Rivet, Expanding Rivet 889520.
  • Positions:Left Rear, Left Upper, Left Front, Left Lower, Right Rear, Right Upper, Right Front, Right Lower.
  • Replaces BMW: 51-11-1-908-077,51110029491, 51114404955 Series 1,3, 4,5, 6 & 7 ,X1,X2,X3, X4,X5,X6,Z4 1984 -.
  • Fits BMW E30 E31 E32 E34 E36 E38 E39 E46 E52 E53 E60 E61 E63 E64 E65 E66 E67 E70 E71 E72 E81 E82 E83 E84 E86 E87 E88 E89 E90 E91 E92 E93 F01 F02 F03 F04 F06 F07 F10 F11 F12 F13 F15 F16 F20 F21 F22 F23 F25 F26 F30 F31 F32 F33 F34 F36 F39 F45 F46 F48 F80 F82 F83 F87 F90 G01 G02 G05 G11 G12 G15 G20 G29 G30 G31 G32 I01 I12 I15.
  • Black Nylon,Head Diameter: 15mm Stem Length: 15mm Fits Into 6.3mm Hole.
Check Stock

Stainless Steel Rivet Nuts Kit #8-32#10-24 1/4\-20 5/16\-18 3/8\-16 Threaded Insert Nutsert Rivnuts

  • Stainless Steel Rivet Nuts Threaded Insert Nutsert 77 pcs 5 Sizes #8-32 #10-24 / 1/4"-20 / 5/16"-18 / 3/8"-16 Rivnuts..
  • 20pcs stainless steel 1/4-20 rivet nuts + 20pcs stainless steel 10-24 rivet nuts + 20pcs stainless steel 8-32 rivet nuts + 10pcs stainless steel 5/16-18 rivet nuts + 7pcs stainless steel 3/8-16 rivet nuts..
  • Thread size: rivet nut 8-32, rivet nut 10-24, rivet nut 1/4-20, rivet nut 5/16-18,rivet nut 3/8-16..
  • Application: rivet nuts for automotive, furniture, decoration and other electrical and industrial products..
  • Package comes with clear plastic box for easy storage, compartments with product labels (8-32, 10-24, 1/4-20, 5/16-18, 3/8-16) for easy distinguish..
Check Stock

340 Pieces Rivet Nuts 8-32 10-24 1/4-20 5/16-18 3/8-16 Metric Rivet Nuts M4 M5 M6 M8 M10 Nutsert RIV Nuts Threaded Insert Nuts Kit Carbon Steel

  • This kit contains 340 pieces of Carbon Steel SAE Rivet Nuts and Metric Rivet Nuts..
  • 50-piece of 8-32 rivet nuts, 50-piece of 10-24 rivet nuts, 30-piece of 1/4-20 rivet nuts, 20-piece of 5/16-18 rivet nuts, 15-piece of 3/8-16 rivet nuts, 60-piece of M4 rivet nuts, 50-piece of M5 rivet nuts, 30-piece of M6 rivet nuts, 20-piece of M8 rivet nuts, 15-piece of M10 rivet nuts..
  • Rivet nuts are commonly used in a wide range of industries throughout the world including: Metal fabrication, automotive, Bicycles, Boats, Furniture, Equipment, Machinery, Aerospace, Defense and many more..
  • Rivet nuts have wide grip range tolerance and they can be installed into a variety of material thicknesses, they are more practical than other fasteners..
  • Rivet nuts are well organized in the clear plastic container with the label showing the threads size..
Check Stock

ABN Pneumatic Rivet Gun Drill Adapter - 1/4in Rivet Nut Tool Attachment with 8 Nosepieces for Cordless or Corded Drills

  • [Turn Your Drill into A Whole New Tool]: Turn your existing corded or cordless drill into a riveting gun with ABN Rivet Tool Rivet Drill Attachment.
  • 8-inch (20.3cm) drill powered rivet tool can fit 12V and up cordless drills for aluminum and steel rivets nuts or 14.4V and up for steel up to 0.3 inches (0.8cm) thick.
  • [Multiple Sizes for Multiple Projects]: Threader rivet nut tool rivet nut kit includes 8 nosepieces to set multiple different-sized fasteners.
  • Rivet gun kit comes in both metric and standard with M3, M4, M5, M6, 8-32, 10-32, 10-24, and 1/4-20.
  • [Adapter You Need]: Help prevent wear with rivet nut drill adapter as this tool pulls the rivet nut instead of turning threads to set.
  • Electric rivet gun adapter can withstand 4X the force of other adapters.
  • [From Garage to Playground]: Attach items to dashboard or connect roof racks, spoilers, fenders, and radiators in your car remodel with air rivet gun adapter.
  • Cordless rivet tool can help fix or build playground equipment, boats, or bicycles.
  • [Use Safely]: Maximum speed for rivet nut kit use is 240 RPM.
Check Stock

GreatNeck 615C Midget Hacksaw Blades, 5 Piece | Designed to Cut Metal, Pipe, and Hard Woods, in Close Quarters | Midget Hacksaw Blades Fit Most Standard 6” Adjustable Frame Hacksaws

  • 2 pack Bi-Mental Hacksaw Blades: Package comes with 24 TPI hacksaw baldes 2 pack..
  • BiMetal Saw Blades: HSS Spring steel with BiMetal material to get flexible, shatter resistant and long life of tough cutting.
  • Replacement Hacksaw Blades: 12 Inch (300 MM) Bi-Metal hacksaw frame blades 12" Length 0.025" thick x 1/2" width. Fits Most Hacksaw Frames..
  • Wavy set teeth and double layer design to get professional grade for maximum cutting.
  • Suitable for cutting steel, piping, wood, and other metal and non-metal materials!.
Check Stock

Woodzdon 50 Pcs 1/4 Hole Nylon Blind Rivet Fender Flare Bumper Cover Door Trim Retainer for Jeep Wrangler Liberty for GM 10184895 for Chrysler 6506007-AA for Ford N803862-S Plastic Expansion Clip

  • Package Include: 50 Pcs 1/4" Nylon Blind Rivets for GM for Chrysler.
  • Hole Diameter: 1/4", Panel Range (Grip): 5/32"-13/32".
  • Replaces for GM 10184895, 20452072, for Ford N803862-S, for Chrysler 6501559, 6506007-AA, for Auveco 13751, Other Part Number: N803862S, 6506007AA.
  • Product Names: Nylon Blind Rivet, Nylon Expansion Rivet, Fender Flare Rivet, Bumper Cover Rivet, Door Trim Rivet, Fender Liner Rivet, Bumper Fascia Rivet.
  • Fitment: for Chevrolet Camaro 1996-2002, for Chevrolet Lumina 1991-1994, for Pontiac Firebird 1996-2002, for Chrysler 300M 1999-2004, for Chrysler Concorde 1999-2004, for Chrysler LHS 1999-2001, for Dodge Intrepid 1999-2004, for Dodge Nitro 2007-2011, for Jeep Gladiator 2020-2021, for Jeep Grand Cherokee 2017-2020, for Jeep Liberty 2002-2012, for Jeep Wrangler 2007-2021, for Jeep Wrangler JK & Wrangler Unlimited JK 2007-2021, Liberty KJ 2002-2012.
  • Other Names: Bumper Rivet, Fender Rivet, Plastic Rivet, Nylon Blind Clip, Nylon Expansion Clip, Fender Flare Clip, Bumper Cover Clip, Door Trim Clip, Fender Liner Clip, Bumper Fascia Clip, Bumper Clip, Fender Clip, Plastic Clip, Nylon Blind Retainer, Nylon Expansion Retainer, Fender Flare Retainer, Bumper Cover Retainer, Door Trim Retainer, Fender Liner Retainer, ....
Check Stock