Reotemp K82P-3 Large Dial Easy Read Pocket Thermometer, 0/220 Fahrenheit, 2\ Dial, 5\ Stem, Waterproof

  • Reliable and Rugged - For a variety of uses: A/C testing, dark room, food inspection, science class, laboratory and thousands of other uses..
  • Quick Response - A combination of responsive bimetal element and thin stem make our pocket thermometer quick to respond..
  • Waterproof and Dustproof - Hermetically sealed dial makes it easy to clean and will not fog up if rinsed off. Comes with a pocket protector for storage..
  • Sensitive Bimetal Element - Accurate to ±3 degrees Fahrenheit, this thermometer has a quality bimetal coil that comes calibrated and ready to go..
  • 304 Stainless Steel & Glass Construction - Quality construction ensures our pocket thermometer will last long term..
Check Stock

Reotemp K82P-7 Large Dial Easy Read Pocket Thermometer, -10/110 Celsius, 2\ Dial, 5\ Stem, Waterproof

  • Reliable and Rugged - For a variety of uses: A/C testing, dark room, food inspection, science class, laboratory and thousands of other uses..
  • Quick Response - A combination of responsive bimetal element and thin stem make our pocket thermometer quick to respond..
  • Waterproof and Dustproof - Hermetically sealed dial makes it easy to clean and will not fog up if rinsed off. Comes with a pocket protector for storage..
  • Sensitive Bimetal Element - Accurate to ±1.8 degrees Celsius, this thermometer has a quality bimetal coil that comes calibrated and ready to go..
  • 304 Stainless Steel & Glass Construction - Quality construction ensures our pocket thermometer will last long term..
Check Stock

Karcy Normal Closed Bimetal Temperature Control Switch Thermostat 70 Celsius N.C KSD9700 Pack of 12

  • KSD9700 product is a kind of thermostat which adopt the bimetal head as the temperature sensing element..
  • The bimetal head is in free state and the contacts are closed when the electrical appliance is working in normal condition..
  • When the ambient temperature raises to the preset operating temperature, the contacts close as the plastic head deforms to jump when being heated, then the circuit is cut off to control the temperature . Then the contacts will close automatically to cut on the circuit when the electrical appliance is cooled down to the reset temperature..
  • Widely used in home appliance's motor and electrical equipment, such as air conditioner motor, transformer, thermal appliances, etc.
  • Package Content: pack of 12pcs 70 Celsius temperature control switch.
Check Stock

Stove Fan Slivek 8-Blades Twin Motor Double Heat Powered Fireplace Fan with Thermometer for Wood Log Burner Fireplace

  • 【Upgrade Heat Powered Stove Fan】- The dual-motor hot air stove fan with 8 blades can produce more warm air and improve the efficiency of the....
  • 【Energy Efficient】- No batteries or electricity required. It is driven by the heat generated by the fireplace or wood burning stove and conducts....
  • 【Overheat Protection】- The built-in bimetal strip design at the bottom of the stove fan, when approaching the maximum operating temperature, the....
  • 【Silent Operation】 - The fan will work at less than 25db, which is very quiet. You will hear virtually no sound at all. And it improves the....
  • 【Operating Temperature】- The working temperature is about 85°C-350°C (185°F-660°F), and the fan speed will be automatically adjusted according....
Check Stock

Fewb Bi Metal Temperature Gauge, 0-120 ℃ Thermometer Round Type Gases Steam Thermometer with Extension Cord for Hot Water, Boilers, and Pipes, Pocket Grill Temperature for Incubators

  • Industrial Use: Bimetal thermometer is a kind of industrial instrument suitable for measuring medium and low temperature for field testing. Can be used to directly measure the temperature of gases, liquids and steam..
  • Send Control Signal: With electric contact bimetal thermometer, and can automatically send a control signal to cut off the power or alarm when the working temperature exceeds a given value..
  • and Easy to Read: Bimetallic thermometer has the advantages of , easy to read, robust and vibration resistant, can replace the industrial glass thermometer, widely used in industry and scientific research departments..
  • Response Speed: Bimetal thermometer also has the characteristics of quick response speed, small size, good linearity and more stable, which can make the user's work efficiency faster..
  • Applicable Scenarios: Mini, durable and portable enough to save space and carry around. Designed for accurate temperature readings, it is ideal for reptiles or plant glass containers, incubators, greenhouses or other pet animal applications..
Check Stock

W10225581 Refrigerator Bimetal Defrost Thermostat for Whirlpool KitchenAid Kenmore Replace WPW10225581 AP6017375 PS11750673 PS237680,2321799

  • W10225581 Refrigerator Bimetal Defrost Thermostat for Whirlpool KitchenAid Kenmore Replace WPW10225581, AP6017375, PS11750673, PS237680,2321799.
  • Replacement Bimetal Defrost Thermostat used on For some Amana, Crosley, Estate, Ikea, Inglis, Jenn Air, Kenmore, KitchenAid, Magic Chef, Maytag, Roper....
  • replaces part number: WPW10225581, WPW10225581V ,W10225581, W10260437,AP4511066, 2321799, 2321802, 2319914, 2188824, 2315504, 1872722, 2149849,....
  • Suitable for the following situations: Fridge too warm,Freezer section too warm,Frost buildup,Fridge and freezer are too warm,Too warm ,Freezer not....
Check Stock

Hacksaw Replacement Blades (10 Pack) High Speed 24 TPI - 12\ Length Hack Saw Blade - Carbon Strength Steel - Industrial Premium Grade

  • Virtually unbreakable (shatterproof) bimetal blades for superb cutting performance, wear resistance and safety.
  • Cuts through all types of materials including alloy and stainless steel.
  • Contains three 12-inch (300mm) Bimetal blades.
  • Compatible with the majority of Hacksaws.
  • Eclipse Predator blades feature precision ground teeth with a positive rake angle and a smooth gullet for effective meterial removal, creating a more aggressive and faster cut and a blade that stays sharper for longer..
Check Stock

Home Fireplace Fan 5 Blades Fireplace Fan Heat Power Heating Stove Fan Black Fireplace Fan Wood Stove Fireplace Fan Heating Fan (Color : Black)

  • 1. Start at low temperature: faster, larger air volume. Designed to circulate warm air generated by the wood/coal or pellet burning stove. Normal surface temperature is 50°C~350°C /122℉~662℉..
  • 2. Environmental protection and self-powered: The thermoelectric module acts as a small generator to drive motor of fan. No batteries or electricity required! Improved hot air circulation brings greater comfort, fuel consumption is as low as 17%, fuel saving, enjoy heat from the stove faster..
  • 3. Safety design: The furnace support is treated with anodized aluminum, high temperature resistance as high as 662°F (350°C), not be deformed or discolored even after working at high temperatures for a long time..
  • 4. Silent operation: As the furnace heats up, the wood stove fan runs faster and faster, dissipating heat to the far corners of the room. It is almost silent..
  • 5. Overheating protection: Bottom built-in bimetal strip to slightly raise the edge of fan when it is close to the maximum operating temperature to protect motor and thermoelectric module..
Check Stock

GreatNeck 615C Midget Hacksaw Blades, 5 Piece | Designed to Cut Metal, Pipe, and Hard Woods, in Close Quarters | Midget Hacksaw Blades Fit Most Standard 6” Adjustable Frame Hacksaws

  • 2 pack Bi-Mental Hacksaw Blades: Package comes with 24 TPI hacksaw baldes 2 pack..
  • BiMetal Saw Blades: HSS Spring steel with BiMetal material to get flexible, shatter resistant and long life of tough cutting.
  • Replacement Hacksaw Blades: 12 Inch (300 MM) Bi-Metal hacksaw frame blades 12" Length 0.025" thick x 1/2" width. Fits Most Hacksaw Frames..
  • Wavy set teeth and double layer design to get professional grade for maximum cutting.
  • Suitable for cutting steel, piping, wood, and other metal and non-metal materials!.
Check Stock

Frienda Magnetic Top Thermometer Wood Stove Thermometer Stove Temperature Meter Stove Flue Thermometer for Avoiding Stove Fan Damaged by Overheat 1

  • What you receive: you will get 1 piece magnetic top thermometers, which can help you make a good control of stove temperature, enough for you to use....
  • Practical helper: with this stove temperature meter, you don't need to worry that you don't know the accurate temperature, and it can help you avoid....
  • Nice material: our stove flue pipe thermometer is consist of aluminum dial, bimetal thermometer sensor, brass pointer and metal handle, sturdy and....
  • Clear to judge: the dial of thermometer includes 3 parts, cool, target, too hot and the measuring range is 100-700°F, so it provides you an accurate....
Check Stock

Round Gas Range Oven Ignitor for GE 41-208 ER4342528 SGR401 SGR400

  • ...re stainless steel shield, high temperature MGT wire leads, and high temperature ceramic wire nuts to wire into original harness. Replaces long and short ignitors. Be careful not to drop your new ignitor.
  • ignitors are fragile and will break easily..
  • Description:The oven igniter, also called a glow bar, heats up the bimetal switch and causes the oven to ignite the gas fed to the burners. A common issue when the oven fails to ignite is a faulty glow bar. If the oven does not start within 90 seconds, the glow bar is likely the issue. Do not be fooled if the glow bar turns red. If it does not reach the appropriate temperature, the oven will not light. If your ignitor uses a connector on the end, reuse the connector from the old ignitor..
  • Description:Use your wire cutters to cut the wires on the old ignitor several inches above the connector. Strip the ends of the wires with a wire stripper. Place the end of a wire on the connector next to the end of a wire on your new ignitor. Use a ceramic wire nut to twist and hold the wires together. Your wires are not color coded, so it does not matter which wires are connected together. Your old ignitor can get very hot even if it doesn’t ignite the burner tube..
Check Stock

Gas Oven Bake & Broil Round Igniter for WB2X9154 4342528 Ignitor AP2014008, PS243425

  • ...re stainless steel shield, high temperature MGT wire leads, and high temperature ceramic wire nuts to wire into original harness. Replaces long and short ignitors. Be careful not to drop your new ignitor.
  • ignitors are fragile and will break easily..
  • Description:The oven igniter, also called a glow bar, heats up the bimetal switch and causes the oven to ignite the gas fed to the burners. A common issue when the oven fails to ignite is a faulty glow bar. If the oven does not start within 90 seconds, the glow bar is likely the issue. Do not be fooled if the glow bar turns red. If it does not reach the appropriate temperature, the oven will not light. If your ignitor uses a connector on the end, reuse the connector from the old ignitor..
  • Description:Use your wire cutters to cut the wires on the old ignitor several inches above the connector. Strip the ends of the wires with a wire stripper. Place the end of a wire on the connector next to the end of a wire on your new ignitor. Use a ceramic wire nut to twist and hold the wires together. Your wires are not color coded, so it does not matter which wires are connected together. Your old ignitor can get very hot even if it doesn’t ignite the burner tube..
Check Stock

MAGICYOYO Professional Unresponsive Yoyo Z01 Focus, Bimetal Yoyo Aluminum Trick Yoyo Long Spin for Pros with 2 KK Ball Bearing + 2 Axle + Bearing Removal + 10 Yoyo Strings

  • MAGICYOYO Z01 - Bimetal aluminum and steel profesional yoyo is particularly fun to play with, featuring the better balance, long spin times, stability, and ease of doing string tricks..
  • BI METAL YOYO - Unresponsive yoyo Z01 is Bimetal. This yoyo has the perfect shape and transition, combined with the high end 6061 aluminum construction of the halves with stainless steel outside rings for more weight, for the favorite intermediate and advanced yoyo tricks. Aluminum is anodized for color, added strength, and corrosion resistance..
  • LONG SPIN YOYO - The lightweight bi metal construction, just 63.5g, silicone response system, axle ball bearing yoyo for super long spin times! Ensures the yoyo can move at high speed through long practice sessions. Good sleep time and string tricks..
  • A YOYO FOR BEGINNERS - A great choice of yoyos for kids and will become your favorite yoyo for pros as you learning more string trick skills. Train fine motor skills and eye-hand coordination for kids..
  • WHAT YOU GET - 1 x Unresponsive yoyo Z01 (Blue), 10 x replacement yoyo strings (colors in random), 2 x KK bearing, 2 x yoyo Axle (M4*8mm), 1 x bearing removal tool, 1 x Allen wrench.
Check Stock