ACDelco GM Original Equipment 10-3014 Diesel Fuel System Treatment Plus - 11 oz
- Helps remove water that bacteria, fungus and algae require for growth.
- Safe to use in all diesel engines including agricultural and marine.
- Safe to use in all diesel fuel, including ultra low sulfur diesel and bio-diesel.
- Keeps diesel fuel fresh, for quick easy starts.
Check StockApache 99000278 3/4\ Gasoline Automatic Fuel Nozzle Kit
- Required for use with 12 or 110 volt "electric" pumps.
- Recommended for dispensing gasoline, up to 15 percent ethanol, diesel fuel, kerosene and oil.
- Kit includes: 3/4" x 14' fuel transfer hose with static wire, 3/4" automatic nozzle with 13/16" spout, 3/4" fuel swivel, for ease of fueling and to prevent kinking, and nozzle splash guard.
Check StockApache 99000276 3/4" Manual Gravity Flow Fuel Nozzle Kit
- Required for use with 12 or 110 volt "electric" pumps.
- Recommended for dispensing gasoline, up to 15 percent ethanol, diesel fuel, kerosene and oil.
- Kit includes: 3/4" x 14' fuel transfer hose with static wire, 3/4" manual nozzle with swivel attached, 15/16" spout (UL approved), and nozzle splash guards.
Check StockSTA-BIL Diesel Fuel Stabilizer And Performance Improver - Keeps Diesel Fuel Fresh For Up To 12 Months - Lubricates And Cleans The Fuel System - Treats 320 Gallons 32 fl oz 22254
- Safe to use in all diesel engines including agricultural and marine.
- Safe to use in all diesel fuel, including ultra low sulfur diesel and bio-diesel.
- Keeps diesel fuel fresh, for quick easy starts.
Check Stock
YAMAKATO 10 Feet 1/4 Inch ID Fuel Line Hose for Kawasaki Kohler Briggs & Stratton Small Gas Diesel Engines Generators w/ 20 Clamp Rubber Black
- For gas, diesel etc. fuel lines, vapor emission lines and vacuum smog control. Please note it’s a non pressure fuel line, not for engines with fuel pumps..
- Strechy 2 layers compound structure, heavy duty. 10 ft in length. 1/4 in 6.4mm inner diameter and 7/16 inch outer diameter (10.4mm). The Hose Clamp is 10mm inner diameter, made of 1mm thinkness steel..
- The Fuel Lines are oil resistant, hot and cold resistant from -22F to 338F and ethanol tolerance.
- Extra long can be be cut to size for all your usage..
- Designed for conveying gasoline, E-85, diesel, and bio-diesel fuels in lawn mowers, tillers, tractors, snow blowers, motorcycles, motor bicycles, mini bikes, dirt bikes, generators, trash water pumps, pit bikes, ATV, UTV, go karts, tao tao, 4 wheelers, and just about all small engines.
- Package includes one 10 feet fuel line and 20pcs Hose Clamps..
Check StockCocoMocart 9.85-Foot Length Stretchy 1/4 Inch ID Fuel Line+20pcs 2/5\ ID Hose Clamps for Kawasaki Kohler Briggs & Stratton Small Engines
- For transfer of petroleum products fuel lines vapor emission lines and vacuum smog control..
- Fuel line:1/4 inch inside diameter (0.64 CM) and 1/3 inch outside diameter (0.8CM)；Hose Clamp for 1/4-inch and 3/16-inch Fuel Filter with an Inner Diameter of 2/5-inches.
- The Fuel Lines are oil resistant,cold-resistant and ethanol tolerance.
- Custom Extra long 9.8 Foot Length (3M) can be cut to size for all your applications.
- Designed for conveying gasoline, E-85, diesel, and bio-diesel, fuels in mowers tractors snow blowers dirt bikes and just about all small engines.
- Package includes:9.8 Feet(3m) 1/4" ID Fuel Line,20 X 2/5" ID Hose Clamps.
Check StockFuel Line 1/2 ID NBR Hose 8 AN Push on Hose 12.7mm ID 8AN Fuel Injection for Small Engines, 3 feet
- ID: 1/2" (12.7mm), OD: 0.78 inch (19.7mm), AN8 NBR liner hose, 3 feet.
- Use hose barbs and clamps, transfer of petroleum products fuel lines for small engines.
- Working Pressure 2Mpa. Burst Pressure 5Mpa, Handles temperature ranges of -40 to +275 degrees F.
- Designed for conveying gasoline, E-85, diesel, and bio-diesel fuels in cars, trucks, buses, etc.
- The Fuel Lines for fuel injected systems, are oil resistant,cold-resistant and ethanol tolerance.
Check StockW4-Moto 30 Gallon Gas Caddy Fuel Tank Portable Storage Transfer Gasoline with Pump 30-Gallons Capacity
- 30 gallon(120kgs) fuel storage tank, large capacity.
- Perfect for storing fuel for automobiles, gas powered lawn and garden tools, motorcycles/ATVs.
- Safe for storing gasoline, diesel, kerosene and even bio diesel. Heavy Duty 10" Wheels for easy transporting.
- Made of solid steel, durable and long lasting, easy to operation.
- US stock, fast shipping. We cooperate with Fedex to make sure you can receive the parcel within 3-7days.
Check Stock1\ Polypropylene PP Manual Fuel Transfer Nozzles, Hose & Belting Trigger Dispenser Pump Gun for Caravans, Boats, Motorhomes, Industrial and Agriculture Diesel Oil/Water Dispensing Pump
- 1" Fuel Nozzles Ideal for equipping fuel pumps and stationary fuel-transfer installations.transferring and distributing Oil and Diesel Fuel include Bio-diesel and Waste Vegetable Oil etc.
- Ideal for Caravans, Boats, Motorhomes, Industrial and Agriculture. These pump can used as the primary system on earth-moving machinery and on mobile fuel pumps on vehicles or in construction yards.
- Hose Swivel at Inlet for increased maneuverability & convenience in use. Manual control..
- the material is Polypropylene PP，Temperature range - -10 C to +65 C.
- The trigger nozzle is also suitable for oils and fuels and has a working pressure of 5 bar (73 psi). The maximum flow of the trigger nozzle is 120 Litres per minute..
Check Stock
Five Oceans FO4285 Marine Boat Fuel Line, Outboard Fuel Line with Primer Bulb for Yamaha/Mercury, 2 Quick Connectors, 3/8 Inch Hose x 6 Ft, Reinforced EPA/CARB, Compatible Ethanol Blended Fuel
- Package Includes a Fuel Line Assembly 3/8 Inch Hose 6 Feet Long, a Premium Primer Bulb, 2 Yamaha/Mercury Female Quick Connectors and 2 Stainless Steel Hose Clamps.
- Compatible with All Yamaha/Mercury Engines and Fuel Tank Models (Mercury Before 1998). Meets USCG type B1-15 SAE J1527 and ABYC Accepted Standards. Reinforce Hose Approved by Environmental Protection Agency EPA and CARB regulations.
- Multi-layer Low-permeation Primer Bulb 3/8 Inch Hose that provides reliable and efficient priming to help start your boat engine.
- Primarily used for fuel feed. Compatible with gasoline up to 85% ethanol-blended fuels, diesel, and all bio-diesel blends.
- Engineered and designed with marine-grade material. This Fuel line is weather and UV Resistant. FIVE OCEANS, 40 YEARS developing High-Quality Marine & Outdoor Products.
Check StockKeeYees 1/4"ID 20-Foot Fuel Line Hose with 30 Pcs Hose Clamps for Motorcycles, Cars, Lawn Mowers, Marine Boat Outboard
- ...Also there is a about 9 inch (23cm) ruler at the box, which can roughly measure the length of the fuel line hose..
- ★ Wide Application ★ KeeYees Fuel Line Hose is universal. Please pay attention to select the correct inner diameter size. Suitable for conveying gasoline, diesel, gas, bio-diesel, fuels in Motorcycles, Cars, Lawn Mowers, Marine Boat Outboard..
Check Stock
Five Oceans 3/8 Marine Fuel Line Yamaha Mercury Outboard Fuel Line Boat Fuel Line Hose EPA/CARB Replaces 22-13563A3 22-13563Q3 22-14213M 2214213Q 22-13563Q7 22-13563A7 22-13563A6 22-13563T7
- COMPATIBILITY: Fuel line hose connector, female, with 3/8 Inch hose barb for use on Force 40 hp & larger (1993 & newer), 9.9/15/25 hp (1998), and all Mercury/Mariner outboards using clip-on type disconnect at engine end & 3/8 Inch I.D. fuel line. All Yamaha/Mercury Outboards and Mercury Fuel Tank Side - 1 End Replaces Original Mercury (OE) Part #: 22-13563A3, 22-13563Q3, 22-14213M, 2214213Q and 1 End Replaces Original Mercury (OE) Part #: 22-13563Q7, 22-13563A7, 22-13563A6, 22-13563T7.
- PACKAGE INCLUDES: Fuel Line Assembly 3/8 Inch Hose 6 Feet Long, a Premium Primer Bulb, 2 Mercury Female Quick Connectors, and 2 Stainless Steel Hose Clamps.
- MULTI-LAYER: Low-permeation Primer Bulb 3/8 Inch Hose that provides reliable and efficient priming to help start your boat engine.
- FUEL COMPATIBILITY: Primarily used for fuel feed. Compatible with gasoline up to 85% ethanol-blended fuels, diesel, and all bio-diesel blends.
- DURABLE MATERIAL: Engineered and designed with marine-grade material. This Fuel line is weather and UV Resistant. Meets USCG type B1-15 SAE J1527 and ABYC Accepted Standards. Reinforce Hose Approved by Environmental Protection Agency EPA and CARB regulations.
Check StockHIAORS Gas Fuel Filter Hose Tube Line for Chinese GY6 50cc 150cc 139QMB 157QMJ Tao Tao Scooter ATV Motorcycle Parts
- ...nk. Make sure the little metal spring clips are on the tubing a little further down than the lenght of filter ends..
- 【Wide Application】Compatible with Briggs & Stratton, Kohler, Craftsman, Simpson, Kawasaki, Husqvarna, Oregon, Stens, Gravley, John Deere, Kubota engines that designed for conveying gasoline, E-85, diesel, and bio-diesel, fuels in mowers tractors motorcycle snow blowers dirt bikes and just about all small engines..
- 【Upgraded Set】The HIDARS Package includes 9.8 Foot 1/4" ID Fuel Line.
- 20 x 1/3" ID Hose Clamps. Hose Clamps are made of 65Mn Spring Steel, durable and can be reused. Tight clamping force prevents liquid leakage..
Check Stock
