DEVMO 5pcs DRV8825 Stepper Motor Driver Module with Mini Heat Sink for 3D Printer Accessories Compatible with RepRap 4 RAMPS 1.4 StepStick

  • ★The DRV8825 stepper motor driver carrier board TI DRV8825 micro bipolar stepper motor drive is a breakthrough..
  • ★Six different step resolutions: full-step, half-step, 1/4-step, 1/8-step, 1/16-step, and 1/32-step..
  • ★Simple step and direction control interface..
Check Stock

STEPPERONLINE 1 Axis Stepper CNC Kit Nema 34 12.0 Nm(1699.68oz.in) 6A Stepper Motor & Driver

  • 1 xDigital Stepper Driver 2.4-7.2A 20-80VDC for Nema 34 Stepper Motor CNC Kit.
  • 1 xNema 34 Stepper Motor Bipolar 1.8deg 12.0 Nm(1699.68oz.in) 6.0A 86x86x151.5mm 4 Wires.
Check Stock

Usongshine Stepper Motor Driver TB6600 4A 9-42V Nema 17 Stepper Motor Driver CNC Controller Single Axes Phase Hybrid Stepper Motor for CNC/42 57 86 Stepper Motor(1 pcs

  • Package included: 1 x Stepper Motor Driver..
  • ✿Stepper Motor Driver✿: 9V-42V DC power supply, H bridge bipolar constant phase flow drive. The maximum 4.0A of the eight kinds of output current..
  • ✿The largest 32 subdivision of the 6 models are optional.
  • Suitable for 4Wires, 6 wires and 8 wires stepper motor. it can control 2 phase stepper....
  • ✿Protect form✿: Energy-saving semi-automatic current lock function, built-in temperature protection and over current protection, under voltage....
  • ✿Suitable for a wide range of stepping motors of Nema 17, 23 and 24 can used in various kinds of machines, such as X-Y-Z tables, labeling machines,....
Check Stock

5pcs A4988 StepStick Stepper Motor Driver Module + Heat Sink for 3D Printer RepRap

  • This stepper motor driver lets you to operate bipolar stepper motors in full-, half-, quarter-, eighth-,and sixteenth-step modes, with an output drive....
  • There are no phase sequence tables, high frequency control lines, or complex interfaces to program..
  • The A4988 interface is an ideal fit for applications where a complex microprocessor is unavailable or is overburdened..
  • The translator is the key to the easy implementation of the A4988. Simply inputting one pulse on the STEP input drives the motor one microstep..
  • This product is a breakout board for Allegro¡¯s A4988 DMOS Microstepping Driver with Translator and Overcurrent Protection.
Check Stock

RAMPS 1.4 Controller + MEGA2560 R3 Board + 5pcs Soldered A4988 Stepper Motor Drivers + 5pcs Heat Sinks + 19pcs Jumpers with USB Cable for RepRap 3D Printer Kit

  • SAVING SPACE: The RAMPS 1.4 board is designed to fit the entire electronics needed for a RepRap in one small package. So it can save space and cost..
  • SCALABLE: RAMPS interfaces an Mega with the powerful MEGA platform and has plenty room for expansion. A number of expansion boards can be added to the system as long as the main RAMPS board is kept to the top of the stack..
  • EASY TO USE: Using the bootloader, you can download the program directly via USB without using other external writers. Development IDE interface is based on open-source principles, allows you to free download for use in project work, school teaching, motor control, interactive works..
  • MODULAR DESIGN: The modular design includes plug in stepper drivers and extruder control electronics on an MEGA shield for easy service, part replacement, upgrade-ability and expansion..
  • POWER SUPPLY AND DRIVER: Supply part of the optional USB power, or as an external power using the AC-to-DC adapter and battery. This stepper motor driver lets you control one bipolar stepper motor at up to 2 A output current per coil..
Check Stock

FYSETC 3D Printer Parts Stepstick Mute TMC2209 V3.1 Stepper Motor Driver UART Mode with Heatsink for Reprap Ram1.4 MKS Gen/SKR V1.3 MKS GEN L Ramps 1.4/1.5/1.6 Control Motherboard-5Pcs

  • TMC2209 V3.1: ultra-silent motor driver, 2020 New Version, compatible to a number of legacy drivers as well as to the TMC2208, Support UART mode, compatible with popular motherboards such as FYSETC S6/F6, MKS SGENL, MKS GENL v2.0, MKS Robin E3D, SKRv1.3/1.4. Heat sink color is random: Blue or Black..
  • Upgrade Tips: add CLK pin, not connect in default, tie to GND via 0R.
  • SPREAD pin is floating. Reserve pull-up and pull-down resistors. Move TX from 3 to 5..
  • Advantage 1: StallGuard for sensorless homing. The integrated power MOSFETs handle motor currents up to 2A RMS with protection and diagnostic features for robust and reliable operation. A simple to use UART interface opens up tuning and control options. Store application tuning to OTP memory..
  • Advantage 2: Industries’ most advanced STEP/DIR stepper motor driver family upgrades designs to noiseless and most precise operation for cost-effective and highly competitive solutions..
  • Advantage 3: Step/Dir Drivers for Two-Phase Bipolar Stepper Motors up to 2.8A peak –StealthChop for Quiet Movement – UART Interface Option –Sensorless Stall Detection StallGuard4..
Check Stock

18/4 AWG Shielded CNC Wire (50FT) — Flexible Stranded Shielded 18-Gauge 4-Conductor Cable for Stepper Motors, CNC Machines, NEMA Motors, VFD Spindles, CNC Routers, 3D Printers and more!

  • RESILIENT & FLEXIBLE: Stepper motor cable designed to bend smoothly in your CNC or 3D printer chain!.
  • SHIELDED 4 CONDUCTOR WIRE: Reduce interference for your CNC spindle motor or stepper motor driver!.
  • BEST RESULTS: Shielded wire means higher quality for your 3D Printer, CNC Machine or CNC Controller..
  • GREAT FOR All STEPPER MOTORS: Nema 17 Stepper Motor, Nema 23 Stepper Motor, Stepper Driver, & more!.
  • STEPPER MOTOR WIRE: The perfect upgrade to any CNC Kit, CNC Router Kit, or CNC Stepper Motor Kit..
Check Stock

3 Axis CNC Kit Nema23 Stepper Motor Dual Shaft 425oz-in 112mm 3A & Driver 40VDC 4A 128 microstep for CNC Router Milling Engraving Machine

  • ♞【Product】3 Axis nema23 stepper motor driver usbcnc controller kit.
  • ♞【Nema 23 Stepper Motor】 Nema 23 Stepper Motor / Holding Torque: 425oz-in,280Ncm / Motor Size:57x57x112mm / Phase:2 / 4pcs lead wire / 1.8 Step.
  • ♞【Stepper Motor Driver】FMD2740C Stepper Motor Driver / 4Amps / Support voltages:12 to 50V DC / 128microstep.
  • ♞【4 Axis USBCNC breakout board】 Come with Hand Control with USB Cable / Only support USBCNC software / input voltage: 15-36V DC..
  • ♞【DC Power Supply】400W 36V 11A DC Switching power supply.
Check Stock

LAFVIN 5 Sets 28BYJ-48 ULN2003 5V Stepper Motor + ULN2003 Driver Board for Arduino

  • Stepper motor with a standard interface..
  • A, B, C, D four-phase LED indicates the status of the stepper motor work..
  • Drive Module Board Size(in): 1.37*1.18*0.6.
  • 5 line 4 phase can be used for ordinary ULN2003 chip driver, connect to the 2 phase , support the development board,With convenient use, direct docking.
  • Package Content: 5 set 28BYJ-48 Stepper Motor + Uln2003 Driver Board +20pcs female to male Dupont cable (as a gift).
Check Stock

GeeekPi 5 Pack Geared Stepper Motor 28BYJ-48 5V Stepper Motor + Uln2003 Motor Driver Board + Dupont Wire Jumper Wires Ribbon Cables Compatible with Arduino

  • 5pcs Stepper motor and driver board compatible with arduinoIDE 2560 1280 DSP ARM PIC AVR STM32 Raspberry Pi..
  • Stepper motor with a standard interface could be connected with Driver Board easily.
  • A, B, C, D four-phase LED indicates the status of the stepper motor work..
  • 5 line 4 phase can be used for ordinary ULN2003 chip driver, connect to the 2 phase , support the development board, with convenient use, direct docking..
  • Package Includes:5 x Stepper Motor,5 x ULN2003AN Driver Board,30 x Female-to-female jump wire.
Check Stock

Eiechip® CNC 3D Printer Kit for Arduino Mega 2560 R3 + RAMPS 1.4 Controller + LCD 2004 + 6X Limit Switch Endstop + 5 A4988 Stepper Driver 3D Printer Interface & Driver Modules

  • 3D Printer Accessories Set meets most needs. Including CNC Shield V3.0, UNO R3 Board, A4988 StepStick Stepper Motor Module..
  • The 3D printer stepper motor shield V3 can be used as driver expansion board for engraving machines and 3D printers..
  • It has in total 4 channel slots for A4988 stepper motor driver modules for driving 4 channel of stepper motors..
  • Each channel of stepper motor only needs 2 IO ports, which means 8 IO ports is sufficient to manage 3 stepper motors..
  • This shield can make quick work for managing stepper motors in your project..
Check Stock

STEPPERONLINE Nema 34 Stepper Motor 8.5Nm(1203.94oz.in) 6.0A 14mm Key-Way Shaft with 1m Cable

  • NEMA 34 bipolar 2 phase stepper motor wihr 4-lead.
  • Holding Torque: 8.5Nm(1203.94oz.in), Rated Current/phase: 6.0 A, Voltage : 36-60VDC.
  • Application: The stepper motor is widely use for 3D printers, medical equipment, industrial equipment, laser CNC machine, automation devices.
Check Stock

STEPPERONLINE Nema 34 Stepper Motor 4.8Nm(679.87oz.in) 6.0A 14mm Key-Way Shaft with 1m Cable

  • NEMA 34 bipolar 2 phase stepper motor wihr 4-lead.
  • Holding Torque: 4.8Nm(679.87oz.in), Rated Current/phase: 6.0 A, Voltage : 36-60VDC.
  • Application: The stepper motor is widely use for 3D printers, medical equipment, industrial equipment, laser CNC machine, automation devices.
Check Stock