JOJOY LUX Brake Caliper Press Tool, 360 Degree Swing Ratchet Expander Wrench Car Wheel Piston Spreader with Extra 2PCS Large Plates for Single Twin Quad Sextuplet Piston Disc Brake Caliper

  • 【Application】This brake caliper press tool suits for disc brake, NOT for drum brake. The tool is equipped with 2 groups of push boards: 7.01x2.36"and 4.53x2.17".Smaller ones are suitable for disc brake system with twin and quad pistons fixed calipers, or single and twin pistons floating calipers. The bigger ones more fit for some sextuplet pistons fixed calipers. Also this ratcheting caliper spreader is designed to "push" the piston back, can not twist and compress, which some brakes need..
  • 【Labor Saving】Brake repair brake spreading tool adopts 360 degree ratchet design, it is easy to get into place and use from any direction, also your hands will not get fatigued from the constant squeezing. The ratchet is in the centre of the dual piston brake caliper compressor, the two spreading plates keep parallel, make sure to spread the force on the caliper piston evenly, in case of caliper damage or pistons dislocation..
  • 【Use-friendly】 Swing the long lever handle to expand and retract the spreading plates, and the positive and negative regulation is realized by flipping the reversing switch in the ratchet. Because of ratcheting mechanism, both spreading plates need pressure to start the ratchet, please squeeze them for the first few swing until the....
Check Stock

NEW SOUTHWEST SPEED DISC BRAKE KIT, FRONT, 2" DROP SPINDLES,ROTORS, BLACK WILWOOD CALIPERS, COMPATIBLE WITH 55-57 CHEVY, PERFORMANCE BRAKE KIT, PART# 205-2052

  • Southwest Speed 2" Drop Spindle & 10 1/2" Disc Brake Kit with Wilwood Calipers (Part #205-2052) for Both Front Wheels. Features Powder-Coated Black Wilwood Calipers..
  • These 1-piece rotor and hat kits deliver the cost effective combination of braking power and style of American muscle cars and vintage rods. They are fully compatible with OE master cylinder output. They provide solid brake capacity and complimentary style with wheel, tire, and suspension upgrades on all types of daily drivers, race vehicles, and ultra-styled show machines..
  • Wilwood's D154 1-Piston Calipers are a lightweight, high-strength, extreme-duty alternative to the OE-style cast iron calipers. Forged billet aluminum bodies, stainless steel pistons, and competition style high-temperature seals put an end to the rust, bore pitting, and seal failures that plague the OE calipers..
  • Kit includes parts for both front wheels: 1.00" Thick x 10.50" o.d. 1-piece rotors/hats 5 x 4.75" Bolt pattern 12mm x 1.5 studs 2" Drop Spindles Strong 4140 steel construction Wilwood D154 1-piston forged aluminum calipers - Black 2.50" pisto....
Check Stock

Eurobike Mountain Bike 27.5 Inch 3 Spoke Wheel 21 Speed Shifting System Adult Bike Dual Disc Brake Youth Moutain Bicycle BlackRed

  • [COMPATIBILITY]: Accepts wheels up to 16"-27.5” with or without tire and 29er 700c needs WITHOUT tire. Calipers accept rim width up to 3.8”. Accepts hub width up to 150mm. Stronger, more comfortable knobs. Uprights move simultaneously to accommodate front and rear wheels..
  • [VARIETY]Spring-loaded calipers and caliper arm prevent binding. Nickel chrome plated heavy gauge steel. Smooth, accurate operation.Can be bench mounted or installed in a bench vice (bolts not included)..
  • [EXTRA FEATURE]:Including bonus spoke tools: Black is for 80 gauge/0.127 inches/3.23mm.Green is for 80 gauge/0.130 inches/3.30mm.Red is for 80 gauge/0.136 inches/3.45mm.
  • [SOLID METAL]:Weight: 7.80kg (17.20lbs).Made in Taiwan..
  • ORDER NOW, WORRY FREE! We're so confident about our product quality that we can provide a life time warranty! Made in Taiwan..
Check Stock

Standard Gage 00524103 Value Micrometer and Caliper Set (Black Face)

  • Set includes a 0 to 1" external micrometer, 0 to 6" dial calipers, and a depth measuring base for making precision measurements.
  • Micrometer has 0.0001" graduations and precision of 0.00016".
  • Dial calipers have a black-face dial indicator with 0.001" graduation increments and 0.100" travel per revolution.
  • T-bar depth measuring base attaches to the dial calipers to aid measurement of holes and recesses.
Check Stock

Fowler 52-058-016-0 Vernier Caliper with 0-6 /150mm Measuring Range

  • Satin Chrome Calipers: Fine quality calipers made of fully hardened stainless steel with microfine black graduations on a satin chrome finish for easy and precise reading.
  • raised sliding surfaces prevent defacement and wear of graduations.
  • Accurate Measurements: With a jaw depth of 1.6″, these fine quality vernier calipers measure accurately in inch or metric with vernier scales of 0.001"/.02mm graduations.
  • perfect measuring tool for the machine shop and household/DIY measurements.
  • 4 Measuring Capabilities: These calipers can be used to measure inside dimensions (ID), outside dimensions (OD), depth, and step measurements.
  • Knurled Lock: A knurled lock screw that holds the sliding jaw in position to hold measurement when needed.
  • a thumb-operated fine adjustment roller allows easy adjustment to a desired size.
  • Set Includes: Fowler caliper along with a fitted case and instruction manual.
Check Stock

BIGTUR Brake Caliper Press Tool, Car Ratcheting Brake Caliper Piston Spreader Press Tool with 2 pcs Steel Plates/2 pcs Hangers

  • Included: Brake piston calipers equipped with 2 large push plates and 2 brake caliper hooks.The larger plates are held in place by built-in strong magnets and cylindrical pins for quick installation and removal.Hooks can hang calipers, brake tubing, and other parts to facilitate inspection of other car parts while the brakes are being repaired..
  • Easy to use: Ratchet technology gives a full 360° swing so that the spreader may be placed at any position.The extended reversing lever allows for easy change from spreading to retracting. Fully retracted: 1.88”, Fully expanded: 3.03”.
  • High quality:Brake caliper compressor uses high strength spreading plates with 1/6" thickness steel, which is not easy to deform and is durable. The ergonomically designed reinforced handle is efficient, comfortable and non-slip..
  • Wide range of applications: Our professional brake caliper press is suitable for all disc brake caliper press ratchets. Suitable for most large trucks and commercial vehicles. Used for dual-piston and four-piston fixed calipers, and single-piston and double-piston floating calipers.The bigger ones more fit for some sextuplet pistons fixed calipers..
  • Professional after-sales team: All kits are provided with lifetime technical support and one-year limi....
Check Stock

NEW CURRIE 70-87 CHEVY C-10 GMC C-15 C1500 TRUCK 2WD 5-LUG REAR END WITH WILWOOD DISC BRAKES, 11\ DRILLED ROTORS, RED CALIPERS, LINES, PARKING BRAKES, AXLES BEARINGS C10 C15, 1982 1983 1984 1985 1986

  • New Currie Enterprises Rear End with 31 Spline Axles with Wilwood Disc Brake Kit including Drilled Rotors and Red Calipers, Parking Brake Cable Kit, and Brake Line Kit for the applications below (Part # GMC7087X5-K7) 003e Currie Crate Rear Ends are designed to be a bolt-in upgrade.
  • Fits: | Chevrolet Trucks: 003e Will Fit All Late-1970 to 1987 C-10 2wd Trucks with 5-Lug wheels | GMC Trucks: 003e Will Fit All Late-1970 to 1987 C15/C1500 2wd Trucks with 5-Lug wheels.
  • Includes: | Currie 9-Plus Centurian Notch-Back Rear End with 31 Spline Axles (Currie # CE-GMC7087X5) 003e 31 Spline performance axle package 003e Housing includes all 3rd member studs installed 003e GMT7087X5 GMC7072X5 GMC7387X5 003e Built to the stock overall width (63 5/8") and pinion offset specs 003e 63 5/8" is measured outside-of-axle-flange to outside-of-axle-flange, in other words, where the wheel bolts on to where the wheel bolts on.
  • Wilwood 11" Disc Brake Kit with Drilled Rotors and Red Calipers (Wilwood Part # 140-11389-DR): | Brake Kit includes: 003e Drilled/Slotted, .810" Thick x 11.00" O.D. Rotors with Hats 003e Low-Profile 4 Piston Dynapro Calipers - Red 003e Drum Parking Brake Assemblies with Caliper Mounting Brackets 003e Bearing Retainers 003e BP-10 Smart Compound Br....
Check Stock

NEW 2\ DROP SUSPENSION & WILWOOD BRAKE SET, SPINDLES, CURRIE REAR END & AXLES, POSI, 11\ DRILLED DISCS, BLACK CALIPERS, MASTER, BOOSTER, ARMS, 1968 1969 1970 1971 1972 CHEVELLE EL CAMINO CUTLASS GTO

  • Brand New Suspension and Brake Kit, with 2" Drop Spindles, for 1968-1972 GM A-Body Cars (Part # GMA6872X-K73) 003e This specific set features 2" Drop Spindles, Steering Arms, and Wilwood brakes with Drilled/Slotted Rotors and Black Calipers.
  • Includes: | Currie 9-Plus Notch-Back Rear End with 31 Spline Axles (Currie # CE-GMA6872X) | Southwest Speed 9" Ford Rear End Third Member with Posi Trac-Loc (SWS Part # 603-2078) | Southwest Speed 2" Drop Spindles (SWS Part # 103-9776) | Southwest Speed Steering Arms (SWS Part # 101-9652).
  • Wilwood Disc Brake Kit with Drilled Rotors and Black Calipers (Wilwood Part # 140-10996-D Front and # 140-140-11389-D Rear) | *** These Brake kits require at least 15" diameter wheels ***.
  • Front Brake Kit includes 003e Drilled/Slotted, .810" Thick x 11.00" O.D. Rotors 003e Forged Dynalite 4 Piston Calipers - Black 003e Caliper Mounting Brackets 003e BP-10 Brake Pads 003e Hubs, Bearings, Seals 003e All hardware to install | Rear Brake Kit includes: 003e Drilled/Slotted, .810" Thick x 11.00" O.D. Rotors with Hats 003e Low-Profile Dynapro 4 Piston Calipers - Black 003e Drum Parking Brake Assemblies with Caliper Mounting Brackets 003e Bearing Retainers 003e BP-10 Brake Pads 003e All hardware to install.
Check Stock

Dupli-Color Single EBCP40500 Caliper Paint Kit Gloss Black Dupi-Color

  • ✅ POR-15 CALIPER PAINTING KIT – Includes everything you need to clean, prep, and paint your calipers. POR-15 Caliper paint has excellent coverage properties, brilliant ceramic-like colors, and withstands temperatures of up to 350°F..
  • ✅ DURABLE – Our caliper paint is beautiful in appearance, and strong enough to withstand the punishment of road debris and temperature extremes, and it looks terrific on any car or truck. Then, whenever your calipers get covered with dirt and brake dust, clean them with anything you like.
  • our brake caliper paint system will stand up to just about anything..
  • ✅ APPLICATION – Be sure to follow our step-by-step instructions for best results. These products should only be handled when wearing latex gloves, eye protections, and an OSHA approved respirator. Always work in a well ventilated area..
  • ✅ WHEN DO I NEED THIS? – Nothing ruins the appearance of a sharp set of wheels like dirty, corroded calipers lurking from behind. Now dress up those steel or aluminum calipers with a super-tough durable finish using the POR-15 Caliper Painting Kit..
Check Stock

JMMRRR Automotive Brake Caliper Press Tool with 2 PCS Steel Plates Ratcheting Caliper Piston Tool with 360 Degree Swing Ratchet Red

  • 【2 Groups Of Push Boards Wider Application】This brake caliper press tool has 2 sets spreading plates, the bigger ones more fit for some sextuplet pistons fixed calipers, smaller ones are suitable for disc brake system with twin and quad pistons fixed calipers, or single and twin pistons floating calipers, is designed to "push" the piston back, cannot twist and compress at the same time..
  • 【360° Ratcheting Design】Adopts 360 degree ratchet design, it is easy to get into place and use from any direction, the ratchet is in the centre of the dual piston brake caliper compressor, both spreading plates need pressure to start the ratchet, to ensure correct alignment to prevent the piston from being misaligned and damaging the brake components..
  • 【Brake Hook & Reversing Switch】Two caliper hooks to protect the brake fluid lines and calipers provides maximum protection for the brake fluid lines and the brake calipers, there is a small positive and negative regulation switch on the ratchet, you can flip it to realize the conversion of expand and retract spreading plates..
  • 【Comfortable And Durable】This brake....
Check Stock

Mini Plastic Caliper, 10 Pack 6in/150mm Vernier Caliper, Double Scale Sliding Gauge Measuring Tool for Student Office, Jewelry Sliding Gauge Ruler Measuring Tool, 5 Different Colors

  • 【Package Includes】- You will get 10pcs mini plastic vernier calipers, available in 5 colors of black, white, beige, red and blue, enough for use..
  • 【Measurement Size】- The size measurement range of the mini caliper is 0-6in/0-150mm, and the metric and imperial double scale design allows you to accurately and clearly obtain the measurement data..
  • 【Durable Material】- These mini calipers are made of plastic, not easy to break and durable enough for long time use. The scale film has clear writing and is convenient for reading..
  • 【Applicable Occasions】- The measuring tool can be used for buttons, jewelry, round and small items, will not scratch the tested items, light weight and easy to carry..
  • 【Easy to Use】- The caliper is easy to push and pull, not easy to slip, and easy to measure. You can easily measure diameter, depth, width, and length with a 6-inch caliper..
Check Stock

NEW WILWOOD FULL FRONT DISC BRAKE KIT, 12' DRILLED ROTORS, RED DYNALITE CALIPERS, PADS, 2002-2006 ACURA RSX, 2004-2005 HONDA CIVIC HATCHBACK SI 5 LUG, 2002, 2003, 2004, 2005, 2006

  • ...remium Big Brake Forged Dynalite Bolt-On Front Hat and 12.19" Disc Brake Kit (Part # 140-7014-DR) for Both Front Wheels. * Only one side pictured. See the list, the diagram, and the brake kit assembly booklet below for a detail of the auto parts included. * Features Drilled and Slotted Rotors with Powder Coated Red Calipers..
  • Wilwood brake kits consist of specifically engineered & matched groups of components designed to provide superior brake system performance & custom appeal over a wide range of applications. * Forged Billet Dynalite Calipers, oversized 12.19" o.d. rotors, and high performance Wilwood brake pads deliver big brake stopping power with high-tech style for front wheel drive sport compacts. These kits are the perfect compliment wheel, tire, and suspension upgrades on all types of vehicles..
  • These Big Brake kits require at least 16" diameter wheels..
  • Brake kit includes parts for both front wheels: | * Drilled and Slotted,.810" Thick x 12.19" O.D. Rotors | * Forged Dynalite Calipers - Red | * Caliper Mounting Brackets | * BP-10 Smart Compound Brake Pads | * Brake Hats | * All Hardware necessary to install the complete braking system on both front wheels | * Complete brake kit weighs approximately 36 lbs. | Below you can view and download th....
Check Stock

150PCS Race Car Balloons Arch Garland Kit Racing Car Birthday Party Checkered Foil Balloons for Birthday Decorations (No Backdrop)

  • RACE CAR BALLOONS KIT CONTAIN: [ 5pcs 18" checkered aluminum foil balloons ][ 6pcs 18" latex red, black and yellow balloons ][ 90pcs 10" black, yellow and red balloons ][ 45pcs 5" red, yellow and black latex balloons ] [16feet balloon chain,100pcs glue points,1 tie tool and 1roll ribbon].
  • HIGH QUALITY MATERIALS: The red, yellow and black balloons are made of quality latex, black & white checkered balloons are made of aluminum foil. The cars balloon garland kit is durable, non-toxic, tasteless and last long for all the party time..
  • RACE CAR THEMED PARTY DECORATION: The race car themed balloon arch is perfect for car themed birthday party decorations,truck birthday party decor,checkered theme party, two fast birthday decoration and so on..
  • LIGHT UP RACE CAR PARTY:The balloons for racing birthday arch are easy to blow, assemble up and hang on the wall, window, fireplace, garden or any place to have a party..
  • USEFUL BALLOONS TOOLS:Balloon tie tool makes it easy to tie lots of balloons.Balloon chain and glue points make different color and size car racing balloons for garland arch..
Check Stock