Categories

Best Black Hexagon Flange Bolt

3.0 Inch 2 Bolt Exhaust Flange Connection Kit Stainless Steel Exhaust Flange and Gasket with 2 Bolts& Nuts 3.0"(77mm)

  • 2-Bolt Exhaust Flange Connection Kit.It is Including 1 Pcs 3.0 Inch Flange , 1 Pcs 3.0 Inch Gasket, 2 Pcs of M10*40mm Flanged Hex Head Bolts, 2 Pcs of Flange Hex Nuts.
  • 3.0" Hole Size: The Hole Size is 3.0 Inch(77mm).it is Pefect fitting Exhaust Pipe/Downpipe Which is the Pipe outside diameter 3.0 Inch(75-76mm).
  • With Oval Hole: Bolt to Bolt distance is 3.6- 5.1 inch (92~130mm),The Slotted Hole munch better to facilitate pipe connection..
  • Stainless Steel Material: The 2 bolt 3.0 " Exhaust Flangle material is made with Stainless Steel 201 provide good strength and corrosion resistance.
  • Exhaust Flange.it is good design to reserve about 3mm thickness for welding port..
Check Stock

FGJQEFG Exhaust Flange Bolts Quick Fix Repair Pipe Kit w/Gasket & Hardware 2'' Inch OD 3 Bolts T304 Stainless Steel Universal Flange Replacement Kit

  • 【High-Quality】The Flange is Made of high quality stainless steel material for perfect durability and strength, not easy to deform..
  • 【Size】Bolt Hole Center to Center: 2 3/4".
  • 【Easy to Use and Install】Quick Fix Flange is easy to use with equipped springs and bolts, wonderful replacement for the previous one..
  • 【Wide Application】Universal for most vehicles and can repair your car very well and effectively..
Check Stock

Universal T04E T3/T4 .57 A/R 57 Trim Turbo Charger Compressor 400+HP Boost Stage III Universal Turbocharger

  • Application: Perfect for 1.5L-2.5L engines.
  • Boost pressures are 7psi(.5 Bar) to 21psi(1.5 Bar).
  • Exhaust (Turbo Manifold) Flange: T3 T4 4 bolt Flange Patterns, Exhaust (Downpipe) Flange: Standard T3 5 bolt downpipe flange pattern.
  • Specification: [Compressor: Trim: 55/A/R: .5.
  • Professional installation is highly recommended (No Instruction Included).
Check Stock

Oatey 3 in. or 4 in. PVC Closet Flange with Plastic Ring without Test Cap

  • Level Fit toilet flange with plastic molded ring.
  • Fits over 3 in. or inside 4 in. PVC pipe.
  • Patented bolt slot shelf eliminates bolt fall through.
  • Patented alignment indicators provide an easy visual when setting flange.
  • Flange sits flush with the floor and can hold head pressure up to 30 feet.
Check Stock

SNUG Fasteners (SNG325) Ten (10) 3/8-16 x 1-1/4\ Long Carriage Bolts Set w/Nuts & Washers, Count

  • A Hexagon Bolt is a threaded fastener with a hexagonal head shape, and are designed to be installed using a spanner. Hexagon bolts are favoured for their robust shape, which makes them suitable for more heavy-duty fastening applications. Hexagon bolts are also generally available in larger sizes than alternative fasteners..
  • As their name suggests, Full Thread Hexagon Bolts are fully threaded. This type of bolt is required when the shaft of a fastener is being inserted completely into a threaded hole. Fully Threaded Bolts are often used to securely fasten two threaded sections together..
  • Made from 18-8 stainless steel, FullerkregⓇ brand screws have good chemical resistance and may be mildly magnetic. Length is measured from under the head..
  • Screws that meet ASME specifications comply with these dimensional standards.DIMENSIONS: Diameter: 1/4" | Length: 2-1/2" | Thread Type: 20 tpi Coarse Thread (Standard).
  • Package includes ten each of bolts, hex nuts , Flat & Lock washers.
Check Stock

maXpeedingrods New GT25 GT28 GT2871 Turbo Charger 350BHP+ 0.64 A/R, GT2860 SR20 CA18DET 5-Bolt Flange Universal Turbocharger for 1.5L-2.0L Engine Water + Oil Cooled Turbo W/Gaskets

  • 【Application】：Universal for Turbo Manifold with T25 Flange(T28 Flange can be converted to T25 Flange, Adrapter is needed). Perfect for all 1.5L-2.0L engine.
  • 【Specification Size】Exhaust (Turbo Manifold) Flange: T25 4-Bolt Flange / Exhaust (Downpipe) Flange: 5-Bolt Flange.
  • 【Horse Power】: Boost Horse Power up to 350BHP.
  • 【Cooling Type】: Water and Oil Cooled. Oil Restrictor: Yes . [Oil Thread Size: M12*1.25 & Water Thread Size: M8*1.25].
  • 【Important Notice】:1. This Turbo is not vehicle specific. It is compatible with a wide range of applications therefore please check the specifications and verify compatibility prior to placing your order. 2. Some modification may be required, professional installation is highly recommended (No Instruction Included).
Check Stock

Exhaust Flange Bolts, Quick Fix Exhaust Flange Exhaust Flange Spring Bolt Repair Pipe Kit Quick Fix 2.25in ID to 2.25in OD Universal Stainless Steel 2002 Tacoma Exhaust Flange Bolts

  • Application: Exhaust spring bolt flange is universal for most vehicles and can repair your car very well and effectively..
  • Standard Specification: Quick fix flange repair pipeline assembly, Exhaust Flange Pipe meets strict quality control standards and can be used reliably..
  • Excellent Quality: Universal Exhaust Flange is made of high quality stainless steel material for perfect durability and strength, not easy to deform, has long service life..
  • Easy to Use: Quick Fix Exhaust Flange is easy to use with equipped springs and bolts, wonderful replacement for the previous old or broken one..
  • Function: 2.25in ID to 2.25in OD exhaust spring bolt flange, used for connection between pipe ends..
Check Stock

Architectural Mailboxes 7600BE MB1 Mailbox, Medium, Blue

  • Can be used to attach Architectural Mailboxes post mount Mailbox to a wooden 4x4 post.
  • Multiple bolt hole patterns, including 4x10 bolt hole pattern and 11-1/4″ side flange mount screw pattern.
  • Can be installed onto a wooden post as a top mount, side rail mount and front cantilever mount to suit your needs.
  • Includes mailbox mounting hardware and spacers used for T2 sized mailbox installation.Finished with durable black powder coat.Supports up to a 50 lbs. mailbox.
Check Stock

Remflex (8053) OBX Exhaust Header Connector Gasket, (Set of 2)

  • 1-3/4 inch pipe, header tube connector flange, 4-into-2/2-into-1.
  • Bolt hole spacing: (A) 4-5/8 inch x (B) 3-1/4 inch.
  • There are no rubber binders or composite materials in Remflex exhaust gaskets so they will not shrink or harden due to time or temperature eliminating the need to go back and continually retighten the flange bolts.
  • Remflex exhaust gaskets come in a standard 1/8 Inch thickness and are designed to crush 50 percent allowing them to fill any pits or gaps in the flange surface up to 1/16 Inch.
Check Stock

(5 Sets) 3/8-16x3\ Stainless Steel Hex Head Screws Bolts, Nuts, Flat & Lock Washers, 18-8 (304) S/S, Fully Threaded by Bolt Fullerkreg

  • A Hexagon Bolt is a threaded fastener with a hexagonal head shape, and are designed to be installed using a spanner. Hexagon bolts are favoured for their robust shape, which makes them suitable for more heavy-duty fastening applications. Hexagon bolts are also generally available in larger sizes than alternative fasteners..
  • As their name suggests, Full Thread Hexagon Bolts are fully threaded. This type of bolt is required when the shaft of a fastener is being inserted completely into a threaded hole. Fully Threaded Bolts are often used to securely fasten two threaded sections together..
  • Made from 18-8 stainless steel, FullerkregⓇ brand screws have good chemical resistance and may be mildly magnetic. Length is measured from under the head..
  • Screws that meet ASME specifications comply with these dimensional standards.DIMENSIONS: Diameter: 3/8" | Length: 3" | Thread Type: 16 tpi Coarse Thread (Standard).
  • Package includes ten each of bolts, hex nuts , Flat & Lock washers.
Check Stock

(5 Sets) 5/16-18x5\ Stainless Steel Hex Head Screws Bolts, Nuts, Flat & Lock Washers, 18-8 (304) S/S, Fully Threaded by Bolt Fullerkreg

  • A Hexagon Bolt is a threaded fastener with a hexagonal head shape, and are designed to be installed using a spanner. Hexagon bolts are favoured for their robust shape, which makes them suitable for more heavy-duty fastening applications. Hexagon bolts are also generally available in larger sizes than alternative fasteners..
  • As their name suggests, Full Thread Hexagon Bolts are fully threaded. This type of bolt is required when the shaft of a fastener is being inserted completely into a threaded hole. Fully Threaded Bolts are often used to securely fasten two threaded sections together..
  • Made from 18-8 stainless steel, FullerkregⓇ brand screws have good chemical resistance and may be mildly magnetic. Length is measured from under the head..
  • Screws that meet ASME specifications comply with these dimensional standards.DIMENSIONS: Diameter: 5/16" | Length: 5" | Thread Type: 18 tpi Coarse Thread (Standard).
  • Package includes ten each of bolts, hex nuts , Flat & Lock washers.
Check Stock

(10 Sets) 1/4-20x2\ Stainless Steel Hex Head Screws Bolts, Nuts, Flat & Lock Washers, 18-8 (304) S/S, Fully Threaded by Bolt Fullerkreg

  • A Hexagon Bolt is a threaded fastener with a hexagonal head shape, and are designed to be installed using a spanner. Hexagon bolts are favoured for their robust shape, which makes them suitable for more heavy-duty fastening applications. Hexagon bolts are also generally available in larger sizes than alternative fasteners..
  • As their name suggests, Full Thread Hexagon Bolts are fully threaded. This type of bolt is required when the shaft of a fastener is being inserted completely into a threaded hole. Fully Threaded Bolts are often used to securely fasten two threaded sections together..
  • Made from 18-8 stainless steel, FullerkregⓇ brand screws have good chemical resistance and may be mildly magnetic. Length is measured from under the head..
  • Screws that meet ASME specifications comply with these dimensional standards.DIMENSIONS: Diameter: 3/8" | Length: 4" | Thread Type: 16 tpi Coarse Thread (Standard).
  • Package includes four each of bolts, hex nuts , Flat & Lock washers.
Check Stock

(10 Sets) 1/4-20x3' Stainless Steel Hex Head Screws Bolts, Nuts, Flat & Lock Washers, 18-8 (304) S/S, Fully Threaded by Bolt Fullerkreg

  • A Hexagon Bolt is a threaded fastener with a hexagonal head shape, and are designed to be installed using a spanner. Hexagon bolts are favoured for their robust shape, which makes them suitable for more heavy-duty fastening applications. Hexagon bolts are also generally available in larger sizes than alternative fasteners..
  • As their name suggests, Full Thread Hexagon Bolts are fully threaded. This type of bolt is required when the shaft of a fastener is being inserted completely into a threaded hole. Fully Threaded Bolts are often used to securely fasten two threaded sections together..
  • Made from 18-8 stainless steel, FullerkregⓇ brand screws have good chemical resistance and may be mildly magnetic. Length is measured from under the head..
  • Screws that meet ASME specifications comply with these dimensional standards.DIMENSIONS: Diameter: 1/4" | Length: 3" | Thread Type: 20 tpi Coarse Thread (Standard).
  • Package includes ten each of bolts, hex nuts , Flat & Lock washers.
Check Stock