Categories

Best Blade Fuse Adapter

MulWark 349pc Car Fuses Assortment Kit & Add-a-Circuit Fuse Adapter- Standard & Mini & Low Profile Mini Automotive Fuses Set (2A 5A 7.5A 12A 15A 20A 25A 30A 35A 40A), for Car Boat Truck SUV RV

  • ...contains 24 commonly used blade fuses: 120pcs Standard: 2A/ 5A/ 7.5A/ 12A/ 15A/ 20A/ 25A/ 30A/ 35A/ 40A(12pcs of each ), 120pcs Mini: 2A/ 5A/ 7.5A/ 12A/ 15A/ 20A/ 25A/ 30A/ 35A/ 40A(12pcs of each), 120pcs Low Profile Mini: 2A/ 5A/ 7.5A/ 12A/ 15A/ 20A/ 25A/ 30A/ 35A/ 40A (12pcs of each).
  • 9 pcs add-a-circuit fuse tap adapters: Standard & Mini & Low Profile Mini( 3pcs of each).
  • CONVENIENT DETECTION: Metal blades extend to the top, allowing you to use a test light or fuse tester while the fuse is still mounted in the fuse block. The plug-in blade fuses are made of plastic with high optical clarity, making it easier to see whether the fuse is blown. They can be easily identified by their color-coded plastic housings, and the white mark amp rating figures on the top.
  • DUAL SLOT FUSE TAP: The double slot fuse holder adds a circuit fuse tap to protect the new circuit on the basis of protecting the existing circuit. It makes adding accessories to your car immensely simple and safe.
  • Add-a-Circuit Fuse Adapter:The fuse adapter is made of high-quality materials, features good melting resistance and excellent conductivity. These 32 Volt fast-acting replacement spade fuses protect your vehicles, farm machines and electrical device/ electrical gad....
Check Stock

Power Wheels Adapter for Milwaukee Battery M18, 18V Power Wheels Battery Conversion Kit with Fuse Holder and 3PCS 30Amp Fuses UIInosoo for DIY, RC Toys and Robotics, Red

  • ...mpervious to heat, moisture, and corrosion, perfect for indoor and outdoor use..
  • Easy to use, gently slide in the battery and lock securely. Portable size, easy to carry. Three screw holes can be well fixed to the walls, cars, machines, or anywhere you like. Please note: Don't connect the battery to the battery adapter when the battery is no longer in use, it may damage the battery..
  • The fuse supply overpowers protection. Waterproof fuse holder rubber cap fits on tightly to protect blade fuse inside. Heat-resistance 14 AWG wire is suitable for high-power batteries..
  • Package includes 1 pack power wheels adaptor, 1 pack inline fuse holder and 3 pack 30amp blade fuses. Note: The red wire is connected to the positive terminal, and the black wire is connected to the negative. When using, the two wires shouldn't be in contact. If the power wheel adapter not be used for a long time, please separate it from the battery..
  • We offer worry-free warranty and friendly customer service within 12 months for your confident purchase. If you are not satisfied with any product, please don’t hesitate to contact us, we will serve you our best..
Check Stock

Nilight 10 Pack 12V Car Add-a-circuit Fuse TAP Adapter with 5 Amp Standard APR ATO ATC Blade Fuse Set for Cars Trucks Boats

  • Dual-slot Fuse Holder: Provides one fuse holder to protect existing circuit and a second fuse holder to protect new circuit. Blue flexible socket....
  • Easy to Use: No need to cut or splice wires to install your electronic accessories, convenient and easy to add an extra power or connection to the....
  • Superior Quality: All of them are made from high quality materials, good bending performance, melting resistance and excellent electrical....
  • Wide Range of Uses: You can use this dual-slot fuse holder when adding LED strips, radar detectors, dash cams, or any other electronic that requires....
  • Package Include: 10pcs Standard add-a-circuit fuse tap adapter + 10pcs 5Amp Standard blade fuse for your convenience..
Check Stock

ASI PTF-76-10, 5 x 20 mm PCB Fuse Holder for Printed Circuit Board Mount, 15 mm Pin Spacing, No Center Pin, 10 Amp, 250V, UL (Pack of 10)

  • 【12v Inline fuse holder for standard blade fuses 】-Fuses holder kit including 12PCS 14 AWG inline fuse holders with 60PCS standard car fuses (2A,3A,5A, 7.5A)X5PCS+(10A,15A,20A,30A)X10PCS . The auto fuse size:19mm x 5mm x 18.5mm.14 Gauge Waterproof Pigtail In-line Fuse Holder can support fuses rating of 1A 2A 3A 4A 5A 7.5A 10A 15A 20A ATC/ATO blade fuse..
  • 【Good Conductivity&High-Temperature Resistance】-The Standard blade fuse holder made of tinned copper as a conductor to ensure good bending performance, refractory resistance and excellent electrical conductivity.Heavy duty 14AWG red power wire suitable for cars, trucks, Jeeps, boats，marine ATVs, UTVs, SUVs, etc. Adding circuit protection for car alarms,car recorder, GPS, dashboard camera, VCD player, etc..
  • 【waterproof rubber cap design】-This 14 Gauge heavy duty inline wiring harness with tight-fitting waterproof rubber cap,theses fuse link wire are not easy to fall off or enter water that can protect all standard blade fuse inside ,your car and electrical device from short circuit..
  • 【Inline Blade Fuse Holder Easy Installation】This 12V-DC ATC/ATO TC/ATO in line fuse holder has long enough wire loop Length.
  • automotive fuse holder loop length: 11.8 inches / 30cm.Firstly,cutting the inline....
Check Stock

GNAWRISHING 16 AWG ATC/ATO Inline Fuse Holder(3PCS) and Standard Blade Fuse 5PCS of Each 1A, 2A, 3A, 4A, 5A, 7.5A, 10A, 15A, 20A Assorted Set

  • 【PRODUCT STANDARD】Fuse Holders 16 gauge (AWG) red color 12 inch/30cm copper wire , and standard blade fuse: 0. 75 x0. 7 x0. 2 Inch. ( 1A, 2A, 3A, 4A, 5A, 7.5A, 10A, 15A, 20A) 5pcs each..
  • 【PACKING QUANTITY】 3PCS 16 AWG ATC/ATO Inline Fuse Holder, 5PCS Blade Fuse of each 1A, 2A, 3A, 4A, 5A, 7.5A, 10A, 15A, 20A, total 45PCS Blade Fuses. 6PCS terminals connectors..
  • 【QUALITY ASSURANCE】 It is tin-plated copper strands. This is a very high quality type of wire with excellent resistance to corrosion, and is typically found in marine grade products..
  • 【WATERPROOF AND DUSTPROOF】Waterproof and dust proof capacity and reliable performance..
  • 【OUR INDUSTRY LEADING ‘LOVE IT OR 100% of YOUR MONEY BACK’ GUARANTEE】 EACH AND EVERY Fuse Holder and Blade Fuse is COVERED with the ‘LOVE IT OR 100% of YOUR MONEY BACK’ GUARANTEE! If for ANY REASON YOU ARE NOT COMPLETELY SATISFIED with the Fuse Holder and Blade Fuse, we will REFUND the ENTIRE AMOUNT (or replace it free-of-charge)..
Check Stock

Wiring Harness,Eyourlife LED Light Bar Wiring Harness Kit 180W 12V 40A Fuse Relay On/Off Switch Relay 14AWG 12FT Length Heavy Duty Universal Fitment(2 Lead)

  • Eyourlife Switch Relay: Eyourlife IP56 waterproof power relay and blade fuse proctect circuit safety from overcurrent or short-circuit.Regulate the power to be consistent and prevent any surge..
  • 2 Available Leads:One wiring harmess with two light output connectors gives you brilliant solution to install dual Led lights..
  • Detail:Operating Voltage: 12V,Amp: 40A ,Power Relay Fuse: 40A ,Blade Fuse: ≤180W.
Check Stock

YUNPICAR Mini Blade Fuse Holder 18 AWG Waterproof Connector Inline Fuse Holder with 5A ATM Fuses,2 Pack

  • Standard ATS 5A Blade Fuse ,Protecting circuits and electrical equipment. Easy to add additional circuits fit for cars, CD players, fax machines and etc..
  • High-quality :Fuse holders wiring harness select Tin plated copper as conductor to ensure its good bending performance, melting resistance and excellent electrical conductivity..
  • Easy to use:Just directly plug to the existing fuse holder, 18 AWG 9.4in red pigtail wire allow you to cut and splice it into any project. Keep your car and electric device in a safe condition.
  • Waterproof design, the rubber cap fits on tightly to protect any standard blade fuse inside. To enhance moisture-proof and waterproof performance and NOT easy to fall off or let water in.
  • Package Included: 2 X Mini Blade Fuse Holder and 2 X 5A Mini Blade Fuse.
Check Stock

MCIGICM 12 AWG Inline Fuse Holder with 30A ATC/ATO Blade Fuse 5 Pack

  • Heavy duty 12AWG wire, better protection to the circuit..
  • Wire length: 8.7 inches 12 gauge wire each side, Fuse holder dimension: 41x35x15mm.
  • Fits for 1A, 2A, 3A, 4A, 5A, 7.5A, 10A, 15A, 20A, 25A, 30A ATC/ATO blade fuse..
  • The rubber cap fits on tightly to protect any standard blade fuse inside..
  • Package included 5 x fuse holder & 5 x 30A blade fuse..
Check Stock

MUYI 2 Set Mini Blade Fuse Holder 14 Gauge Waterproof Pigtail Inline Fuse Holder with 15A ATM Fuses

  • Material:copper+rubber, Fuse holder dimension:38x25x13mm.
  • In-line fuse holder for mini blade fuses, Suitable for 1A,2A,3A,5A,7.5A,10A,15A,20A, ideal for car truck atv boat.
  • 14 AWG thick red pigtail wire allow you to cut and splice it into any project, Wire length:30cm/12inches, Wire range:14 AWG.
  • Waterproof design, the rubber cap fits on tightly to protect any mini blade fuse inside.NOT easy to fall off or let water in..
  • Package Included: 2 X Mini Blade Fuse Holder and 2 X 15A Mini Blade Fuse.
Check Stock

MCIGICM Fuse Holder 10 Gauge Inline Fuse Holders 10 AWG Waterproof with 40 Amp Fuse 3 Pack

  • Heavy duty 10AWG wire, better protection to the circuit..
  • Wire length: 6 inches 10 gauge wire, Fuse holder dimension: 41x35x15mm.
  • Fits for 1A, 2A, 3A, 4A, 5A, 7.5A, 10A, 15A, 20A, 25A, 30A, 40A ATC/ATO blade fuse..
  • Waterproof design, the rubber cap fits on tightly to protect any standard blade fuse inside..
  • Package included 3 x 10 gauge fuse holder & 3 x 40A blade fuse..
Check Stock

Nilight - 50029R 120 Pcs Standard Blade Fuse 5A/7.5A/10A/15A/20A/25A/30A AMP Assorted Set with 10 Pack 14AWG ATC/ATO Inline Fuse Holder 2 Years Warranty 1 Count Pack of 10

  • Standard Blade Fuse: 0. 75 x0. 74 x0. 3 Inch. Fuse Type: Blade. Material: Zn alloy/Plastic. Protect your car and your electrical device from short circuit, overload etc.Material:plastic.
  • 10 Pack In-Line Fuse Holder: Heavy duty 14 gauge (AWG) red color wire, great look and added protection to the circuit..
  • Safety Protection: Unique design of the dual slot tight-fitting waterproof lid to enhance moisture-proof and waterproof performance. It's no doubt that this is an inline fuse holder extremely safe and reliable. Easy to use: Turn one fuse slot into two while providing protection for both circuits.
  • Suitable Fuses: Fits for 1A, 2A, 3A, 4A, 5A, 7. 5A, 10A, 15A, 20A, 25A, 30A ATC/ATO blade fuse of 19. 1 × 18. 5 × 5. 1 mm.
  • Package Include: 10 x 14AWG ATC/ATO Inline Fuse Holder and 120 PCs standard blade fuse+Puller.
Check Stock

ZOOKOTO 12V/24V 4 Way Car Auto Blade Fuse Board Box Standard Blade Fuse Box Holder Block with 5A/10A/15A/20A Fuses

  • ZOOKOTO Fuse block Automotive Blade 6Way fuse box ATC/ATO Blade Fuse Box 4 Fuses (5A/10A/15A/20A) Included.
  • Can be secured via 2 pre molded holes, each fuse holder is numbered to make fuse installation and identification as easy as possible.
  • Plastic and Metal Material, ZOOKOTO fuse box is made by tin-plating copper components, non-toxic and tasteless layer, good hardness and conductivity, durable construction, quality assurance.
  • Sturdy and robust construction,with transparent cover for dust and moisture protection,suitable for middle-sized blade fuses.
  • Cable connection via side, plated 6.3mm (standard) blade terminals. Convenient for examination and repair, easy to troubleshoot in outdoor.
  • widely used in airplane, subway, bus, ship, tanker, modified car, eco-car, etc.
Check Stock

10ga Fuse Holder 2 Pack MUYI Inline Fuse Holder 10 Gauge Fuse Holders 12v Waterproof Pigtail Blade Fuse Relay with 40AMP ATC Fuses

  • 10 AWG thick red pigtail wire allow you to splice it into any project..
  • Wire length: 6 inches 10 gauge wire each side, Fuse holder dimension: 41x35x15mm.
  • Waterproof design, the rubber cap fits on tightly to protect any standard blade fuse inside. NOT easy to fall off or let water in..
  • Inline Fuse Holder for standard blade fuses, Suitable for 1A,2A,3A,5A,7.5A,10A,15A,20A,30A,40A, ideal for car truck trailer atv boat marine.
  • Package Included: 2 X Standard Blade Fuse Holder and 2 X 40Amp Standard Blade Fuse.
Check Stock