Best Blade Width

Dark Repulser Great Sword of Kirito Costume Replica

• Overall Length: 40 Inches (In Sheath) / Blade Length: 33 Inches.
• Blade Width: 4 Inches / Blade Material: Carbon Steel (Edged but not Razor Sharp).
• Blade Thickness: 3 mm / Handle Length: 10 Inches.
• Handle Material: ABS, Zinc Aluminum / Guard Width: 9.75 Inches.
• Guard Material: Zinc Aluminum with Faux Gem / Scabbard: Faux Leather Sheath with Nylon Straps.

Viking Traders Civil War Confederate States of America Cavalry Officer Saber Replica CSA Replica Sword 39 Long High Carbon Steel Blade-Hilt Thread Wrapped Leather Handle -w/CSA Etching

• Blade length: 31" --- Overall sword length: 38-1/4" --- Blade width at cross: 2-3/8".
• Blade width near point: 1-1/2" --- Cross width: 8" --- Handle length: 4-1/4".
• Pommel Length: 3" --- CoG (Center of Gravity): 6-1/4" --- CoP (Center of Percussion): 11".
• Blade material: 1065/1095 High Carbon Steel --- Blade : Full Tang, Razor Sharp Edge --- Scabbard : Leather.
• Weight W/O Scabbard: 3 lbs 4 oz --- Weight W/Scabbard: 4 lbs 5 oz.

2-742-0544 & 1-742-0571&2-781-0490 Fits Craftsman Troy-Bilt MTD Shredder Chipper Blade Kit

• 2- 742-0544 & 1- 742-0571&2-781-0490 Fits Craftsman Troy-Bilt MTD Shredder Chipper Blade Kit.
• 742-0571 shredder blade Part Numbers: 981-0490 781-0490 942-0571 742-0571.
• 942-0571 shredder blade Fasteners: 710-1054 Screws 5/16"X24"X1"  Includes 6 736-0119 Lock Washer 5/16"  Includes 6 912-0411....
• 781-0490 Chipper Blade Dimensions: Length: 3-3/8" Width: 1-1/4" Thickness: 1/4" Bolt spacing on center: 1-7/8".
• 742-0571 Shredder Blade Dimensions: Length: 8-3/8"  Width: 2" Thickness: 3/16" Bolt Spacing on center: 4-7/8"".

Jet, Small Grizzly, Powermatic 64 Table Saw Zero Clearance Insert by Peachtree Woodworking PW956 Approx Dims 12-1/2 in x 3-1/2 in x 7/16 in

• ...ng and compare it to the size we list. Also be aware of the shape of your current insert of whether its round, square ends or if there are any indents or protruding notches. Insert colors may vary from images shown..
• If you own a table saw, then you probably have had smaller pieces of wood get caught between the saw blade and the factory supplied throat plate opening. This can cause that piece of wood to jam up against the blade and go flying across the room or worse yet, right back at you. Zero clearances help minimize this situation from happening since there is no gap between the blade and the zero clearance opening. The opening is more like a custom slot cut to the exact width of your table saw blade..
• Another great reason to use a zero clearance insert is to help reduce that pesky and irritating tear out you always tend to get on your cuts. Without a zero clearance, the wood has no support by the blade to prevent the wood from tearing out. This is especially true when cutting plywood. Zero clearance inserts help prevent tear out by essentially enveloping the blade on all sides which doesn’t allow the wood to tear out since there is not gap between the blade and insert..
• Zero Clearance inserts can be used in conjunction with most any table saw bla....

Spyderco Ladybug 3 Salt Lightweight Folding Knife with 1.93

• LADYBUG 3 - Spyderco Ladybugs come in a diverse collection of handle and blade materials. Our Ladybugs have a common denominator: they're small, innocuous, cut like the devil, carry well on a keychain and become a tool for everyday life..
• FRN HANDLE - Fiberglass Reinforced Nylon is a polymer mixed with glass fiber then injection molded into formed and textured lightweight high-strength knife handles..
• HOLLOW GRIND - It comes with bevels that are ground with a concave radius. The bevels may extend the full width of the blade (full hollow grind) or only a portion of its width..
• PLAINEDGE - A sharpened knife blade with no serrations or teeth sometimes referred to as a smooth blade..
• SPECIFICATIONS - Closed Length (Inches): 2.48, Overall Length (Inches): 4.41, Blade Length (Inches):1.93, Blade Steel: H-1, Grind: Hollow.

Craftmade BCD42-AW Contractor's Standard Fan Blades Replacement 42-Inch, Antique White, Set of 5

• SIMPLE REPLACEMENT: Our ceiling fan blade arm is the best option for replacing your existing ceiling fan's rusted and damaged blades. The blade arms are weightless and stronger when compared to others because of the use of high-quality materials..
• PROMISES STABILITY: When the fan wobbles, the performance, and longevity of the fan are diminished. To assist with this, our fan blade arms are properly calibrated and adjusted for the fan's effective operation by maintaining balance..
• EASY INSTALLATION: The holes of the fan blade’s arms correlate to the fan blades and fan positioning. The arm's modest weight makes it easier to handle and assemble the fan to the blades. The package comes with instructions for installation..
• BEST APPROPRIATE FOR: Most 42-inch fans are compatible with these fan blades. The fan blade outer hole’s width.
• width between the outer hole and center hole, and width of fan motor holes are all considered to build up the arms..
• BEAUTIFUL FINISH: This ceiling fan blade is available in Attractive White. This beautiful tint can blend in with any decor and will match a wide range of colored fans. This individuality not only adds elegance to your fan but also nicely complements it..

Harbor Breeze 5-Pack White Ceiling Fan Blade Arms

• EASY REPLACEMENT: The Dysmio Fan Blade Arms are the best choice to replace your worn and broken fan blades arms on your existing ceiling fan. Using the best quality material, the Blade Arms are lighter and stronger than most compatible products available in the market.
• WELL BALANCING: Wobbling of the fan will lead to wear and tear of the motor, reducing the life of the fan drastically. Each 5-piece Dysmio Fan blade Arm set is accurately matched in weight and increases the performance of your Ceiling Fan by eliminating the problem of unbalanced Fan blade arms..
• POPULAR FINISH: The Ceiling Fan Blade Arms comes in White finish. The Light tone is assured to complement any décor and goes well with the majority of Fans in a Light color finish. The finish not only adds simplicity to your fan but also redecorates it with its beauty..
• SUITED FOR 42-INCHES: The Replacement fan blades are compatible with most 42-inch fans. The Arms are designed taking into consideration fan blade outer holes width, outer hole to center hole width and fan motor holes width. The mounting hardware also comes included to avoid a run to the hardware store..
• EASY INSTALLATION: The holes fit into positions for the fan blades and fan. The lightweight of the Arm helps in easy handling and ....

Towerback | First Responder EDC Folding Knife | 3 in 1 Tactical Outdoor/In Car Emergency Knife | Glass Breaker | Seatbelt Cutter, Gold

• SHARP BLADE: Sharp blade for outdoor tasks such as wood cutting, camping..
• HANDLE: Fiber Glass Steel Handle Ergonomic Design and Window Breaker and Belt Cutter.
• DIMENSION: Blade: 1.1 inch Width, 3.7 inch Length, 0.14 inch thickness. Handle: 1.2 inch Width, 5 inch Length, 0.55 inch Thickness. Total Length: 8.7 inch,7.6 oz..
• LOOK and FEEL: Sleek and Sophisticated EDC Knife with Ergonomics Design..

Armory Replicas UlfSune Fang Damascus Steel Viking Carolingian Battle Ready Sword

Shimomura Kihan 35098 Tonkatsu Shop Slicer, Julienne Vegetables, Made in Japan, Smart Cabbage, 0.04 inch (1 mm) Slicer, Safe Holder

• Size (approximate): Width 3.6 x Length 10.6 x Height 0.6 inches (9.2 x 27 x 1.5 cm), Blade Length 3.1 inches (8 cm), Slicing Surface Width 3.0 x Length 7.1 inches (7.5 x 18 cm), Holder Width 3.8 x Depth 2.4 x Height 1.2 inches.
• Materials: Main Body/Holder: ABS (Acrylonitrile Butadiene Styrene) Resin (Heat Resistant up to 176°F (80°C)), Blade: Stainless steel.
• Size (W x L x H): Approx. 3.6 x 10.6 x 0.6 inches (9.2 x 27.
• Product Weight: Approx. 2.9 oz (85 g) (Holder: 0.7 oz (20 g).
• Heat resistant temperature: 176°F (80°C) (resin part).

Armory Replicas Elucidator Repulser Foam Sword Back and Sheath

• Elucidator Overall Length: 43 Inches / Dark Repulser Overall Width: 9 Inches.
• Elucidator Handle Length: 9.50 Inches / Dark Repulser Handle Length: 9.25 Inches.
• Elucidator Blade Length: 33.50 Inches / Dark Repulser Blade Length: 33 Inches.
• Elucidator Cross Guard Width: 8 Inches/ Dark Repulser Overall Width: 9 Inches.
• Material: Polyurethane Foam / Inner Core: 10mm.

Spyderco Atlantic Salt Lightweight Folding Knife with 3.68

• SALT SERIES - The Salt Series tackles rust through the groundbreaking use of nitrogen-based blade steels like H-1 and LC200N. The result is a diverse selection of knives that are incredibly resistant to corrosion..
• FRN HANDLE - Fiberglass Reinforced Nylon is a polymer mixed with glass fiber then injection molded into formed and textured lightweight high-strength knife handles..
• HOLLOW GRIND - It comes with bevels that are ground with a concave radius. The bevels may extend the full width of the blade (full hollow grind) or only a portion of its width..
• SPYDEREDGE BLADE - Spyderco's two-step serration patterns consisting of one large and two small serrations. The pattern increases the cutting edge's surface area by up to 24%..
• SPECIFICATIONS - Closed Length (Inches): 4.59, Overall Length (Inches): 8.27, Blade Length (Inches):3.68, Blade Steel: H-1, Grind: Hollow.

Yongli Sword Ghost of Tsushima Cosplay Replica High Manganese Steel Blade Sword Japanese Samurai Game Katana a Pair I

• The Katana is 100% Pure Hand-Forged and Hand-Sharpened to Create a Perfect Blade.
• This Full Tang Samurai Sword Greatly Enhances the Strength of the Sword.
• The Blade is Made of High manganese Steel with Perfect Sharpness.
• High Quality Red Wood for Saya(Scabbard).
• The Tsuka(Handle) is Tightly Wrapped Over Imitation Ray Skin and....