Categories

Best Blaster Idle Screw

Aokus Throttle Cable and Carb Cap and Idle Adjuster Screw Tors Removal Eliminator Kit Compatible with Yamaha YFS200 Blaster 200

  • 【Package】1 x Throttle Cable + 1 x Cap + 1 x Idle Screw with the Drill & Tap Kit.
  • 【Fitment】Compatible with Yamaha Blaster 1988-2006.
  • 【Tips】If you have any pre-sale or after-sale questions please feel free to contact us,we will be happy to assist you..
  • 【High Quality】Aftermarket Premium High Quality.
Check Stock

RTFMUCA 01-0390 Throttle Cable Kit for Yamaha Blaster 200 1988-2006 with Carb Cap and Idle Adjuster Screw Removal Eliminator Kit

  • For use on Yamaha Banshee and Blaster models.
  • Used to install a standard Mikuni idle adjuster into the carburetor body.
  • Idle adjuster is necessary if carburetor top has been replaced with a standard Mikuni cap.
  • Kit includes a drill bit (#6), thread tap (6 millimeter x .75 millimeter), 2 idle screws with lock nuts and instructions.
  • Drill press or mill should be used to drill holes in the carburetor bodies.
Check Stock

Amhousejoy Idle Screw Kit and Tap Install Kit Fit for Yamaha Banshee 350 YFZ 350 1987-2006

  • Compatible with : The throttle cable compatible with Yamaha Blaster 200 YFS200 models 1988 1989 1990 1991 1992 1993 1994 1995 1996 1997 1998 1999 2000....
  • Easy to install : Plug and play, completely suitable for direct replacement, no need to modify or trim, just replace the original throttle cable..
  • Solve the Problem of Uneven Acceleration : The throttle cable is responsible for controlling the throttle valve and the fuel needle, that is, the....
  • Durable Material: This throttle cable has passed the waterproof test, made of high-quality metal, is not easy to rust, scratch-resistant, long-term....
  • Package Including: 1x 1 x Throttle Cable + 1 x Cap + 1 x Idle Screw with the Drill & Tap Kit.You can contact us by email if you have any questions....
Check Stock

TFCFL 100CC 2-Stroke Bicycle Gasoline Engine Motor Kit, Bike Bicycle 44 Tooth Motorized Petrol Gas Motor Engine Kit

  • The 100CC bike engine kit includes all the parts and accessories needed to convert a regular bike into a gasoline-powered motorcycle. Comes with all needed accessories for easy installation..
  • Low fuel consumption, 150 miles per gallon, very energy efficient and economical. Engine requires 8oz 2 Stroke oil per gallon of gas during Break In Period.Suitable for most 26" /28"bikes..
  • Upgraded Tunable High Performance Carburetor. Features: Choke lever on the handlebars, Main jet. (Can be re-jetted), Pilot jet, Copper oil needle, Idle RPM Screw, Idle Air Screw that delivers more fuel with the choke on, instead of restricting air..
  • 50mm bore single piece cylinder/head (increased weight capacity, lower operating temps, easier starting, sustained power output across varied rpm range).
Check Stock

Autolite 1100 1 Barrel Carburetor Fits 1963 to 1968 Mustang Falcon Comet straight six cylinder 170 & 200 CID engines hot air choke works with automatic and manual transmissions

  • Installation of carburetor requires certain experience, idle screw and air mixing screw need to be adjusted.If you have any problems during installation and use, please contact the seller via Amazon email. We will provide you with a satisfactory after-sales treatment plan, including returns, exchanges and free accessories. Similarly, we have Professional mechanics will provide you with suggestions on how to deal with some problems..
  • The carburetor is installed on the 64 Mustang engine for testing. After you order it, you need to fine-tune the carburetor idle screw and air mixing screw..The carburetor has 2 idle screws and 1 air mixing screw.Carburetor Be applicable to 1964-1968 ford 170/200 straight 6 cyl engines.
  • This carburetor is simple in structure and easy to install.After installing the carburetor, if the fuel mixture is too rich and the exhaust pipe emits black smoke, it is necessary to adjust the idle mixing screw to reduce the fuel injection..
  • Before purchase, please check carefully whether the carburetor you need to replace is the same as this product. If necessary, please ask us or local professional auto repair personnel.This product does not include air filters and copper fittings.Fuel Filter 1/8"-27 NPT This size fits our carburetor.
Check Stock

Autolite 1100 Carburetor & Manual Choke 1963-1969 Mustang Falcon 200 Ci inline 6-cylinder automatic transmission F100 series truck 223 262 CI engines

  • The new carburetor has gone through many strict test procedures. We have tested the leakage, idle speed and other test items to ensure that the carburetor at the factory is suitable for fully qualified..
  • Truck F100 straight-6 engine 223 cu in (3.7 L).
  • Truck F100 straight-6 engine 262 cu in (4.3 L).
  • Mustang straight-6 engine 200 cu in (3.3 L).
  • When installing the carburetor, only adjust the air mixing screw on the base. If the idle speed needs to be adjusted, adjust the idle screw.
Check Stock

ACETECH-Predator MKIII-MK3 Tracer Unit

  • Distinctive appearance with ACETECH QD system.
  • Blaster Module Simulates Mono muzzle flash.
  • Three modes available: Tracer with flame, Tracer only , Flame only.
  • Intelligent power control: Shake and wake enter sleep mode while idle for 5 min..
  • Suitable for standard sirsoft and gel BBs.
Check Stock

Holley 750 Cfm Aluminum Street Hp Mech Sec

  • Optimized street/strip calibration for outstanding throttle response and drivability.
  • Contoured venturri inlet offers balanced airflow for increased horsepower.
  • Screw in air bleeds for precision tuning capabilities.
  • Four corner idle for precise idle control.
  • Mechanical secondaries for awesome tire turning performance.
Check Stock

THUNDERMINGO 1 Barrel Autolite 1100 Carburetor Fits For 1964-1968 Ford Mustang Falcon Comet 200 223 262 CI Inline 6 CYL 170/200 CID Engines Automatic Choke,Replace ND1101

  • Replace Part Number: ND1101,ND1102,ND1169,ND1170.
  • Fitment: Carburetor Fits For 1964-1968 Ford Mustang, Fairlane, Falcon, Comet, Mercury 170" 2.8L, 200" 3.3L 6 CYL Engine and other vehicles with the 170 Cid or 200 Cid Inline 6 Cylinder Engines.
  • Attention:The carburetor is installed on the 64 Mustang engine for testing. After you order it, you need to fine-tune the carburetor idle screw and air mixing screw..The carburetor has 2 idle screws and 1 air mixing screw.Carburetor Be applicable to 1964-1968 ford 170/200 straight 6 CYL engines.
  • Trusted and reliable: From the overall structure to every small part, the carburetor has been constructed with high precision, every component is fully tested and adjusted, organically assembled into one powerful carburetor.Perfect choice to replace your defective carb assembly..
  • Customer Service:This Item comes as shown in the picture.Please check pictures for more details.If you are uncertain about the item, feel free to contact us for confirm.Before purchase, please check carefully whether the carburetor you need to replace is the same as this product..
Check Stock

PeleusTech Worker Hands Screw for Nerf N-strike Elite Rapidstrike CS-18 Blaster Battery Compartment

  • ►▷ Applicable Model: Appropriate for Nerf CS-18 N-Strike Elite Rapidstrike etc. Please make sure your blaster model before you order!.
  • ►▷ Advantage: Unique hand-tightened screws give easy access to remove battery door without a screwdriver. Allow you replace battery faster, is....
  • ►▷ Package Includes: 3 pieces screws. Two of them are hand-tightened screw, the last one is compatible slot type hand-tightened screw..
  • ►▷ Material: Made of superior stainless steel material that is solid and durable to use..
  • ►▷ Perfect Gift Choice: As a perfect gift to your kids, son, grandson or nerf blaster toy gun lover..
Check Stock

WORKER Mod Narrow Magazine Talon Dragon Claw 18 Short Darts Magazine Clip Toy Magazine Black

  • The Talon clip need to attach the worker neck clip adapter together which can work with the stefan mod system Blaster..
  • It can hold 18 short darts,we recommend 15 short darts.Remove the original edge synthesis,design with one-piece ultrasonic synthetic,Which no screw to....
  • When you swap the same type darts clip.you can pull it out directly to replace another clip and no need press the release..
Check Stock

WORKER Mod Narrow Magazine Talon Dragon Claw 18 Short Darts Magazine Clip Toy Adapter Black

  • The Talon clip need to attach the worker neck clip adapter together which can work with the stefan mod system Blaster..
  • It can hold 18 short darts,we recommend 15 short darts.Remove the original edge synthesis,design with one-piece ultrasonic synthetic,Which no screw to....
  • When you swap the same type darts clip.you can pull it out directly to replace another clip and no need press the release..
Check Stock

WFLNHB Carburetor Replacement for Kawasaki 1987-2003 Mojave 250 KSF250A 1986-2004 Bayou 300 KLF300B KLF300C 4x4 KLF300A Carb

  • Replacement for Kawasaki 1987-2003 Mojave 250 KSF250A 1986-2004 Bayou 300 KLF300B KLF300C 4x4 KLF300A.
  • The idle speed adjusting screw is optimized to control the idle speed more finely.
  • High Quality Carburetor Replacement Part.
  • You will get the fairly reliable and durable carb to help deliver optimum engines performance and to give your ATV the new power and torque.
Check Stock