Categories

Best Blow Molding Plastic Processing Machinery

SENRISE 100 X Transparent Shrink Wrap Film Bag Heat Seal Gift Packing for Homemade DIY Project Packaging Candle Jar Bath Bomb Gift 2235CM

  • ...anged screw with same distance and different deep. Material of screw: High quality nitriding steel 38CrMoAlA,with nitriding surface HV≥800,brittleness≤2. Material of barrel: High quality nitriding steel 38CrMoAlA,with nitriding surface HV≥900,brittleness≤2..
  • DIE HEAD: Head mode of plastic toy extrustion blow molding machine, the continuous extrusion head is designed with material center coming-in type and removing the plastic melting line on the product surface, easily for material or color change, saving the time & material cost with speedy operation..
  • HYDRAULIC SYSTEM: The main hydraulic system of fully automatic precision plastic injection blow moulding machine is mainly composed of motor, pump, pressure regulating valve block, reversing valve blocks, cylinders and oil chillers. It controls platens open & close, carriage up & down, extrusion system up & down, blow pin actions, or even spinning cut and so on..
  • ELECTRICAL CONTROL: The electrical control system of plastic small bottles blowing machine is composed of operation panel, temperature control module, PLC, input & output module, proportion board, contactors, voltage stabilized source, air swtiches, mid relays, proximity switches, inverter and motors. The operation panel contains power s....
Check Stock

Casters 4pcs Overall Stainless Steel Rod Universal Ball Bearing Machine Tool Universal Wheel Endless Steel Ball Wheel (Size : 12D)

  • 360 degree universal transfer bearings.Load rating is 30kg..
  • Widely used in transmission system, processing system, processing machinery and packaging machinery ancillary equipment..
  • Package Includes:1/4/6 x Roller Ball Bearing Caster.
Check Stock

1M Drag Chain Cable Carrier R18 10x10mm(Inn HxW) Plastic Black Towline Wire Cable Chain Carrier for CNC Router Mill and 3D Printer,with Extra Connector,Screwdriver,Screws, Bridge Type(10x10）

  • 【Specification】Internal: 10 x 10mm/0.39 x 0.39inch(H*W).
  • External: 13.5 x 17.2mm/(0.53 x 0.68inch)；Total Length : 1M/39.4inch.
  • 【Extra】Extra one pair connector, can split the integral drag chain into 2 pieces to use.
  • Extra 8pcs screws, easy to fix the chain.
  • Extra Screwdriver, freely disassemble to change the length of the chain..
  • 【Multi-Applications】The black plastic drag chain cable carrier is suitable for the occasions of reciprocating motion, tow and protect the built-in electric cable, oil pipes, gas pipes, water pipes. It has been widely used for CNC machine tools, electronic equipment, stone machinery, glass machinery, doors and windows machinery, Injection molding machine, manipulator, lifting and transportation equipment, Automated warehouses etc..
  • 【Flexible】Every segment can be removed and it could be combined with another length to make one long piece..
  • 【Performance】 Low noise, wear resistance, high-speed movement..
Check Stock

Sandblaster Gun Nozzles 10Pcs Tip Sand Blaster Replacement Cylinder Ceramic Abrasive Nozzles for Blasting (Pink)

  • Durable ceramic sandblast nozzle for injection of medium particles for rapid removal of paint, rust, corrosion and scale..
  • Mainly used for deep processing such as sandblasting and engraving of glass. Carving and processing of marble and other stones..
  • Suitable for sandblasting and derusting the surface of industrial machinery parts and castings such as machinery and metallurgical casting..
  • Can use a variety of sandblasted media such as glass beads, brown corundum, garnet, soda water, walnut shell..
  • Packing specification: ceramic nozzle*10..
Check Stock

RCH Hardware CH-S56-11S-BLK-10 |9 Gauge Decorative Solid Steel Standard Link Fixture Chain | 10 Foot Increments | Black Finish

  • EASY TO INSTALL - The Cable Drag Chain is easy to install and repair, free movement, low noise, wear-resistant, high-speed movement..
  • FEATURES - High wear resistance, high temperature resistance, salt resistance, acid resistance and alkali resistance.Due to the small spacing, the operation is particularly quiet and the noise is low..
  • APPLICATION - Widely used in 3D printers, CNC machine tools, electronic equipment, fire fighting machinery, stone machinery, glass machinery, door and window machinery, injection molding machines, robots, overweight transportation equipment, automated warehouses, etc..
  • FAST MOVING SPEED - Very suitable for short distance light bearing condition.
Check Stock

Micarta Linen LE Phenolic Sheets .250inch (1/4inch) Thick x 12inch x 36inch,Natural(KS-2356-21-10)

  • ✤ Insulating rod has the characteristics of insulation and no static electricity, making it a mold for insulating switches, variable resistors, and machinery for electronic products..
  • ✤ Good physical properties: The insulating rod has a certain degree of temperature resistance and is used for tooling molds. Instantaneous temperature resistance of 140°C, long-term temperature resistance of 90°C, and can be used in a variety of high-temperature environments..
  • ✤ Product application: It is suitable for electrical machinery, electrical equipment and insulating structural parts with high mechanical performance requirements, and is used in electronic workshops, chemical machinery, aviation industry, petrochemical and other fields..
  • ✤ Excellent insulation: high mechanical strength, toughness and wear resistance, dimensional stability, corrosion resistance. Excellent performance, good electrical performance at room temperature, and good mechanical processing performance..
  • ✤ Material: Phenolic resin. The insulating rod corrosion resistance, precision machining processes.Anti-insulation,high hardness,easy processing,non-absorbent, non-conductive.widely used in electrical products..
Check Stock

AIMIMI Bakelite Rod Brown Insulating Sticks Phenolic Resin Electrostatic Prevention Suitable for Structural Parts Length 500mm,Diameter,35mm

  • ✤ Insulating rod has the characteristics of insulation and no static electricity, making it a mold for insulating switches, variable resistors, and machinery for electronic products..
  • ✤ Good physical properties: The insulating rod has a certain degree of temperature resistance and is used for tooling molds. Instantaneous temperature resistance of 140°C, long-term temperature resistance of 90°C, and can be used in a variety of high-temperature environments..
  • ✤ Product application: It is suitable for electrical machinery, electrical equipment and insulating structural parts with high mechanical performance requirements, and is used in electronic workshops, chemical machinery, aviation industry, petrochemical and other fields..
  • ✤ Excellent insulation: high mechanical strength, toughness and wear resistance, dimensional stability, corrosion resistance. Excellent performance, good electrical performance at room temperature, and good mechanical processing performance..
  • ✤ Material: Phenolic resin. The insulating rod corrosion resistance, precision machining processes.Anti-insulation,high hardness,easy processing,non-absorbent, non-conductive.widely used in electrical products..
Check Stock

Antrader Pillow Block Bearing 10mm Bore Diameter Zinc Alloy Bearing Housing KFL000 Flange Bearing Pack of 4

  • 10mm Bore Diameter self-aligning, pillow block bearing, you can adjust or replace easily..
  • Having a wide inner ring with two set screws for attaching to the shaft..
  • Widely used in various of machinery, especially in food machine..
  • Also can be used into pharmaceutical machinery, conveyering systems, film processing machinery, spin machine, printing machinery,etc..
  • Zinc-aluminum alloy housing, chrome steel insert, easy to install. Pack of 4 Antrader Flange Bearings..
Check Stock

Scicalife Transfer Bearing Roller Balls - 20pcs Stainless Steel 360 Degrees Flange Mounted Round Ball Bearings - Screw Mounted Universal Rotation Caster for Transmission/Furniture

  • Screw rod diameter : 16mm； Ball diameter : 30.16mm.
  • Material: bearing steel ,stainless steel.
  • Universal ball rolling flexible,the object is very flexible slip, reducing the labor intensity of the workers.
  • Widely used in transmission systems, feeding systems, processing systems, processing machinery and packaging machinery auxiliary equipment..
Check Stock

Mssoomm Linear Motion Rod Shaft Guide D 12mm x L 19.69 inch / 500mm Case Hardened Chrome Plated for 3D Printer, DIY, CNC - Metric h8 Tolerance, 2Pcs

  • Tolerance: Metric h8, hardness about HRC58-64, hardening depth: 0.8-2.5mm, straightness≤ 0.1/1000mm, chrome thickness: 0.015mm-0.02mm, roundness: no more than 3μm.
  • Adapting C45 high quality steel, high frequency quenching, surface chromium plating(15um-20um). The case hardness could be reach to 58-64 HRC. Durable and corrosion-resistant..
  • Widely applied in CNC, 3D printer, automatic machinery, injection molding machine, engraving machine, etc. especially in bearing purpose.
  • Humanization Design:Chamfer on both ends, easier to install linear bearings and won't hurt fingers when installing it.
  • We can customize the linear rail, including the length and end processing, please tell us if you need. We provide full range of different diameter of the linear rail shaft rod: 5, 6, 8, 10, 12, 13, 14, 16, 20, 25, 30, 35, 40, 50mm and so on..
Check Stock

39.3 inch Carrier Drag Chain Cable Wire R18 10x20mm (Inn H x W) Plastic Black Open Type for CNC Router Mill and 3D Printer,Wire Carrier Cable with 1 Pair Connectors,1pc Screwdriver,12 Screws

  • 【Extra】 Extra one pair connector, can split the integral drag chain into 2 pieces to use.
  • Extra 12pcs screws, easy to fix the chain.
  • Extra Screwdriver, freely disassemble to change the length of the chain and open the side cover of it..
  • 【Multi-Applications】The black plastic drag chain cable carrier is suitable for the occasions of reciprocating motion, tow and protect the built-in electric cable, oil pipes, gas pipes, water pipes. It has been widely used for CNC machine tools, electronic equipment, stone machinery, glass machinery, doors and windows machinery, Injection molding machine, manipulator, lifting and transportation equipment, Automated warehouses etc..
  • 【Flexible】 Each section of the drag chain can be opened for easy installation and maintenance. You can also freely assemble the length as you needed..
  • 【Performance】 Low noise, wear resistance, high-speed movement..
  • 【Specification】Internal: 10 x 20mm/0.39inch x 0.79inch(H*W).
  • External: 15 x 28mm/0.59inch x 1.1inch(H*W)；Total Length : 1Meter/39.4inch.
Check Stock

Plastic Drag Chain Cable Carrier Closed Type with End Connectors R38 18 x 18mm L1000mm for Electrical CNC Router Machines

  • External Size: 23x28mm(OuterH*OuterW)；Bending radius: R38.
  • Change Size: You could link the cables with each other to form one long length you need..
  • Can not be opened.Reinforced nylon, low temperature resistance, wear resistance, corrosion resistance..
  • NOTE: When the moving terminal is bent as "U" shape, the longer part will lay flat. Or the tail of the chain will bend upward..
  • The Drag chain has been widely used in CNC machine tools, electronic equipment, fire machinery, stone machinery, glass machinery, doors and windows machinery, injection molding machines, robots, overweight transportation equipment, automated warehouses and so on..
Check Stock

60 Pieces 2 Sizes 4th of July Glitter Star Ornaments for Tree Independence Day Star Hanging Ornaments Patriotic Red Blue White Mini Tree Ornaments for Independence Day Labor Day Christmas Tree Decor

  • Large quantity: There are a total of 60 stars of different sizes in the product, which can be applied to decorate a very large area of environment to make your festival more atmosphere, delicate and romantic.
  • Blow molding material: the product is made of quality plastic material with blow molding process, which has the characteristics of light weight, strong and durable, and can be reused for a long time.
  • Glitter surface: The surface of the product is coated with a glitter layer, which can shine under light, looks very beautiful and eye-catching under the light.
  • Multi-purpose: The product can be served for many festival decorations, including Independence Day, Memorial Day party, Flag Day party, Labor Day party, Veteran's Day party, and all the other patriotic events. They are a great choice to show your patriotism.
  • Independent packaging: different colors and different sizes of the products are individually packaged, and there will be no problems such as mixing and falling off of the shiny surface due to bumps.
Check Stock