Categories

Best Blow off Valve Weld Flange

PERRIN Blow-Off Valve Kit Red Compatible with Subaru WRX 2008-2014

  • This plug is perfectly suitable for F150 2013-2021 and for Expedition Ecoboost Engines 2015‑2021. Perfectly matched, it is a perfect substitute for old or damaged discharge valve plugs..
  • Using this discharge valve plug allows you to discharge hot pressurization to the atmosphere, lower the inlet temperature and improve overall performance throughout the operating range. You can have a clean exhaust valve sound and better performance without recirculating hot air and introducing unwanted heat into the engine..
  • The drain valve plug is easy to install and easy to use. There is no need to install any tools, and the installation can be completed quickly within 15 minutes. First find the blow valve pipe joint, rotate the coupler to remove the blow pipe, then disconnect the BOV hose from the intake pipe, and install the VTA MOD into the pipe before the exhaust valve..
  • This VTA mod allows you to vent the hot boost to the atmosphere instead of recycling it and creating much hotter inlet temperatures. This will lower inlet temperatures and improve overall performance throughout the operating range..
  • The best part is you can have clean blow off valve sound and know you have the best performance without recycling HOT air and introducing unwanted heat into the engi....
Check Stock

TOMMARS Sheet Metal Hole Punch Panel Flanger Tool Special Rusted or Damaged Panel Repair Tool Joggler Flange Pliers Edge Setter

  • Special tool to achieve the hole punching and flanging of work piece, for creating and installing patch panels, replacement panels, or custom sheet metal work..
  • One part of the tool creates flanges for weld joints that are overlapping, whereas the other part is capable of punching the weld hole with Φ5mm. Used to flange onto sheet metal up to 20 gauge (1.2mm)..
  • Punch and flange tools are ideal for repairing or restoring rusted or damaged panels when a replacement cannot be sourced or when repair is more cost effective than replacement..
  • This Punch & Flange Pliers is Suitable for automotive body repair, also for sheet metal, iron plate, plastic, machinery, etc..
  • The tool features a spring return handle, which allows for ease of operation. Designed with anti-slip rubber grip for safe use..
Check Stock

Watts Brass & Tubular 374A 3/4 Boiler Relief Valve

  • 1/4" male NPT 175 PSI Industrial air compressor / tank pressure safety relief valve..
  • Also known as a "Pop Off" or "Blow Off" valve..
  • This relief valve is manufactured in the United States and is stamped with "UV" & "NB" symbols..
  • The relief pressure of this valve is set at 175 PSI and is accurate within + or - 3% of the set pressure..
  • Features a silicone rubber soft seat relief valve to prevent leaks.
Check Stock

RX WELD Upgrade version Oxygen & Acetylene Gas Cutting Torch and Welding Kit Portable Oxy Brazing Welder Outfit With Portable Tool Bag

  • ... 【EASY TO USE】 To use this torch, attach the appropriate tip for your project, connect the oxygen and gas tank to the torch handle, and set the PSI to the necessary positions.
  • Once you have ignited and adjusted to a neutral flame, move the flame to the metal and push the valve handle slowly.
  • Move the torch tip slowly along the line of your cut until the metal has fully parted.
  • 【Complete Accessories】The portable oxy brazing welder features with hoses,welding and cutting torches,goggles,tip cleaners and spark lighter.There is a heavy duty molded storage case packing a spanner for easy carrying and transport..
  • 【BUILT TO LAST】Constructed of heavy-duty metal parts, this welding torch set is ideal for first-time metal workers.
  • This brazing kit is designed with copper tips and brass fittings for strength, durability, longevity, and precision.
  • The plastic blow molded case provides safe storage for this portable torch kit.
Check Stock

600A Arcair Carbon Arc Gouging Torch Arc Welding Equipment Welding Accessories Heavy Duty Industrial Grade Torch with Cables Grooves Machining Tool

  • 【PRINCIPLE OF ACTION】The carbon arc gouging is a method of surface grooves machining which adopts carbon rods or graphite rods as electrodes to generate arcs with the workpiece and melt the metal, finally blowing the molten metal off with compressed air.
  • 【TURN AT ANY ANGLE】The gun head can be rotated at any angle, suitable for various specifications of carbon rods.The product can operate in any position with great flexiblity.It has good accessibility, it’s easy and convenient to operate.
  • 【ROTATABLE TAIL】The tail air pipe and the adapter can be rotated, which is convenient for application and simpler operation.High-quality cable hose provides high heat resistance and abrasion resistance.
  • 【ONE-KEY VALVE DESIGN】One-button air valve is designed in the middle of the handle, which is easier to operate with the handle.It’s mainly used to dig the groove, clear weld defects, and remove weld root.
  • 【HIGH ACCURACY】When clearing weld defects, the shape and depth of the flaw can be clearly observed under the arc.It’s high in precision and efficiency.It can reducing the labor intensity.
Check Stock

Speedway Motors Turbospoke Bicycle Bike Muffler Exhaust Noise Maker

  • Whistle diameter: S: 1.8cm, M: 2.3cm, L: 2.7cm, XL: 3.1cm..
  • Application: Four sizes are Universal fitment for all vehicles models, Easy to install, beautiful, very stylish, low cost, is to decorate the car..
  • Made of high quality and light weight aluminum Universal Turbo Sound Noise Exhaust Muffler Pipe Whistle / Fake Blow off valve BOV Simulator Whistler.
  • Easy to install, can be installed under 2 minutes, Make your vehicle sound like a turbo vehicle with the turbo system or blow off valve.
  • Please note: The turbo sound whistle is not suitble for extremly curved tail pipes. For vehicles with small displacement, choose a large one.
Check Stock

Remflex 2048 Exhaust Gasket for Chevy V8 Engine, (Set of 2)

  • Chevy V8 - 4.8L, 5.3L, 5.7L- LS1, LS6/6.0L- LS1, LS2 Vortec, 1-1/2" RP, For Weld Bead Headers, 2/Set.
  • additional sealing material is provided around the weld bead to provide a better seal.
  • There are no rubber binders or composite materials in Remflex exhaust gaskets so they will not shrink or harden due to time or temperature eliminating the need to go back and continually retighten your flange bolts.
Check Stock

ABN Oxygen & Acetylene Torch Kit – 10 Pc Welding Kit Metal Cutting Torch Kit, Portable Cutting Torch Set Welder Tools

  • ...raze, and solder with precision and efficiency.
  • EASY TO USE: To use this torch, attach the appropriate tip for your project, connect the oxygen and gas tank to the torch handle, and set the PSI to the necessary positions.
  • Once you have ignited and adjusted to a neutral flame, move the flame to the metal and push the valve handle slowly.
  • Move the torch tip slowly along the line of your cut until the metal has fully parted.
  • CREATING A NEUTRAL FLAME: A neutral flame creates carbon dioxide that purges air from the heated metal for easier cutting and welding.
  • To create a neutral flame, you must find the correct relationship of oxygen to acetylene.
  • After adjusting the pressure and connecting the oxygen and acetylene tank systems to the brazing torch kit, open the acetylene gauge and light the torch.
  • Begin opening the oxygen valve and continue adding oxygen until sharp cones are created at the tip of the portable torch.
  • BUILT TO LAST: Constructed of heavy-duty metal parts, this welding torch set is ideal for first-time metal workers.
  • This brazing kit is designed with copper tips and brass fittings for strength, durability, longevity, and precision.
  • The plastic blow molded case provides safe storage for this portable torch kit.
Check Stock

RetroRubber OEM Grade Butyl Headlight Sealant, Gray

  • ★Butyl Sealant Main Application: Butyl rubber tape is suitable for the shock-absorbing paste of windshield, door waterproof film,decorative parts,car lamp,bus body and frame,as well as the sealing of body seam and flange plate.
  • ★Excellent Sealing: Our Butyl rubber sealant features excellent sealing adhesion,butyl tape can be sticky to any type of metal, concrete,glass,plastics and porous surfaces,no worries for falling off. Easy installation and removal.
  • ★Easy To Use: Simply release the butyl sealant from paper and press it sufficiently around the pinch weld.And after removing headlamp cover, the weld areas should be dry,clean,free from dust,oil and grease.Butyl rope prevent leakage,corrosion,deformation,vibration, weather and aging. Non-toxic, tasteless, pollution-free, easy to use.
  • ★Black Butyl Tape: Rubber Sealant is a non-drying,non-hardening synthetic rubber based butyl rubber sealant. It will remain permanently sealing and waterproofing,high viscosity,elasticity and tightness.
  • ★Butyl Windshield Sealant Size: Butyl sealant Diameter: 9mm, Length: about 4 meters. It is long enough for re-sealing about 2 or 4 headlight assemblies, easy to cut to fit for your need.
Check Stock

NNiKQ Blow Off Valve Noise Turbo Sound Whistle Simulator Muffler Tip Car Accessories D

  • 【Made of high-quality aluminum】lightweight and durable. Easy to install on the car's tailpipe. If the car is installed in the tail throat and does not sound, it may be that the airflow of the car is not large enough and not concentrated enough to blow the whistle. You can install it outside and use the wind. Because the airflow of the wind is larger than the airflow of the car, it is easier to blow up..
  • 【Sound】Use a turbine system or a blow valve to make your vehicle sound like a turbocharged vehicle..
  • 【Wide range of applications】Make your vehicle sounds like a turbo vehicle with the turbo system or blow-off valve. Applicable to all kinds of cars, motorcycles and racing cars..
  • 【Easy to install】Universal Fits for all vehicle..
  • You Will Get】Aluminum turbo sound simulator whistle x 2 & 100% Satisfied guarantee..
Check Stock

Sunxenze Air Duster Blow Gun with 5 Meter Long Coil PU Air Hose,Air Tank Blow Gun Kit,Blue

  • This air duster blow gun is a professional quality tool, easily gets into tight spaces..
  • Heavy Duty Truck Air Duster Blow Gun, For use on trucks with air tank systems, the air blow Gun kit is used to clean from the Cab to the Sleeper or clean your element air filter or anything else..
  • Polyurethane (PU) Air Hose Outer Diameter:6mm.
  • T-Shaped Quick Connector With Bronze Ball Automatic Shut-Off Valve..
  • The air blow gun kit is convenient for drying off fluids, clearing debris, and much more..
Check Stock

Sunxenze Air Duster Blow Gun with 5 Meter Long Coil PU Air Hose,Air Tank Blow Gun Kit,Black

  • This air duster blow gun is a professional quality tool, easily gets into tight spaces..
  • Heavy Duty Truck Air Duster Blow Gun, For use on trucks with air tank systems, the air blow Gun kit is used to clean from the Cab to the Sleeper or clean your element air filter or anything else..
  • Polyurethane (PU) Air Hose Outer Diameter:8mm.
  • T-Shaped Quick Connector With Bronze Ball Automatic Shut-Off Valve..
  • The air blow gun kit is convenient for drying off fluids, clearing debris, and much more..
Check Stock

UPE Group New 1/4 ASME Brass Safety Relief Valve 140 PSI American Made Compressed air pop Off Valve

  • 1/4" male NPT 140 PSI Industrial air compressor / tank pressure safety relief valve..
  • Also known as a "Pop Off" or "Blow Off" valve..
  • This relief valve is manufactured in the United States and is stamped with "UV" & "NB" symbols..
  • The relief pressure of this valve is set at 70 PSI and is accurate within + or - 3% of the set pressure..
  • Features a silicone rubber soft seat relief valve to prevent leaks.
Check Stock