Categories

Best Blr Scope Mount

Vê Se Volta Comigo

  • The Free Motion Spring Foot gives clear visibility when doing free motion quilting or embroidery..
  • The spring action keeps the fabric from lifting with the needle as the stitch is being formed which helps eliminate thread breakage with specialty or....
  • fit Brother Sewing Machine Models: CE8100, HE1, HE-240, Innov-is 990D, LB6770, LB6800, LB6800PRW, LB6800THRD, LB6810, NQ1400E Innov-is, NS2750D,....
  • fit Babylock Sewing Machine Models: BL137A, BL137A2 (Sofia 2), BLMCC Accord, BLMR, BLR, BLR2, BLR3.
Check Stock

Air Venturi 4x15 Air Rifle Scope and Lasso Mount, BB Gun Scope Attachment

  • AIR GUN SCOPE: The 4x15 Air Rifle Scope and LASSO Mount is a perfect scope attachment that helps any air gun user have better range and optics on their air rifles. Use this scope to instruct beginners, or buy it for a veteran air rifle master..
  • AIR GUN COMPATIBILITY: This high-powered Air Rifle Scope and LASSO Mount is compatible with Red Ryder, Lil Duke, and Lil Sure Shot air rifles. The scope mount attachment gives you better control and precision and more powerful shots..
  • HIGH-QUALITY MATERIALS: The 3/8-inch dovetail mount has an aluminum construction and weighs 0.37 lbs, making this a lightweight rifle scope that's easy to carry around. The included adjustable scope rings help you find the right fit on your air rifle..
  • INSTALLATION: Remove the elevation ramp from the rear sight and use a screwdriver to remove the rear stock screw. Slide the mount base forward into the top of the air gun and replace the rear stock screw. Attach the air gun scope on top of the mount..
  • AIR VENTURI: Since 2010, we've been an innovator in the airsoft guns and accessories industry. Our quality airsoft equipment lasts you through years of use. Rely on our air rifle and BB gun accessories to give you a safe and fun shooting experience..
Check Stock

Monstrum Picatinny/Weaver Rail Mount for Marlin 336/1894/1895 Series Lever Action Rifles | 0 MOA

  • Picatinny/Weaver rail mount built specifically for Marlin 336/1894/1895 Series lever action rifles.
  • Scope mount installs directly to receiver via the factory mounting holes and included set screws with no additional hardware required.
  • Allows for the mounting of Picatinny or Weaver standard scope rings, scope mounts, red dots, or other optics.
  • Available in two styles - a 0 MOA mount for zeroing your scope at short to mid range distances and a 20 MOA mount for zeroing your scope at long distances.
  • All Monstrum scope mounts and accessories come with a lifetime guarantee.
Check Stock

UTG M1 Carbine Mount Complete with 1\ Rings , Black

  • Design for All Standard Pi-catinny Rails. 2 Type of Different Heights 1 inch Scope Mount Rings Contain 2 Pack High Profile Rings and 2 Pack Medium Profile Rings. Perfect for All Standard 21mm Rails. Perfect for Mounting Most Scopes Which Are in 1''/ 25.4mm Scope Tube..
  • Four Set Of Two Type 1'' Scope Rings, 2 Pack Medium Profile, 0.5'' Gap from Base of Mount to Bottom of Ring. ( Item height: 1.9''). 2 Pack High Profile, 0.71'' Gap from Base of Mount to Bottom of Ring. ( Item height: 2.0'')..
  • Hollowed-Out Design & Built-In Tape Protection: Design In See-Through Style, Provide Potential Visibility For Open Sights, Meanwhile Hollowed-Out Configuration Helps To Release Heavy Duty When Clamping Your Scope. Built-In Tape Inside Per Rings To Prevent From Marring The Scope, Also Prevent Sliding and Holding Postion Accurately..
  • Premium Aircraft Aluminum, Solid & Durable: Precision Machining of Aircraft Grade 6061 Aluminum Alloy + High Strength Steel In Black Matte Anodizing Finish, Sturdy & Lightweight Construction, High Quality, Sturdy Construction, Build No Wobble, Offer Durable Safe Performance In The Field..
  • Rail Clamp Screw Design & Easy To Install: With 1 Rail Clamp Screw and 2 Scope Clamp Screws Per Side, Ensure Mount Any 1'' Scope Firmly, Just Twist On/Off....
Check Stock

Rail Riser Mount for Red Dot Sights, Optics and Accessories, Full Size Scope Riser Mount for Scopes

  • ☑ Double scope ring mount for Picatinny/ Weaver Rail (21mm)..
  • ☑ Design in see-through style, provide potential visibility for open sights, meanwhile hollowed-out configuration helps to release heavy duty when clamping your scope..
  • ☑ Built-in tape inside per rings to prevent from marring the scope, also prevent sliding and holding postion accurately..
  • ☑ The ring is for most scopes which are in 1''/ 25.4mm scope tube. Medium profile, 0.5'' gap from base of mount to bottom of ring. ( Item height: 1.9'').
  • ☑ With 1 rail clamp screw and 2 scope clamp screw per side, ensure mount any 1'' scope firmly, just twist off the nut and mount the base on the 20mm rail easily..
Check Stock

Feyachi RM26 Picatinny Riser Mount, 0.75 inch 5 Slots Riser Mount for Red Dot Sight

  • ✌【Perfect for All 21mm Picatinny Rails】LONSEL 4 set of different heights 1'' scope mount rings include 2 pcs medium profile + 2 pcs high profile in one package. These scope rings fit for all 21mm standard picatinny rails, perfect for mounting most scopes which are In 1''/ 25.4mm scope tube. Available in two styles, A must have scope rings for hunting shooting!.
  • ✌【4 Set Of Two Styles 1'' Scope Rings】2 Pcs Medium Profile: 0.5'' gap from base of mount to bottom of ring, Item Height 1.9'', Dimension 1.9 x 1.6 x 0.8 Inch, Weight 2 Oz per ring.
  • 2 Pcs High Profile: 0.71'' gap from base of mount to bottom of ring, Item Height 2.0'', Dimension 2.0 x 1.6 x 0.8 Inch, Weight 2 Oz per ring..
  • ✌【Hollowed-Out Design & Built-In Tape Protection】Design in see-through style, provide potential visibility for open sights, meanwhile hollowed-out configuration helps to release heavy duty when clamping your scope. Built-in tape inside per rings to prevent from marring the scope, also prevent sliding and holding postion accurately..
  • ✌【High Quality Aluminum, Solid & Durable】Precision machining of aircraft grade 6061 aluminum alloy + high strength steel in black matte anodizing finish. Sturdy & lightweight construction, build no wobble, offer durable safe p....
Check Stock

Modkin Scope Rings, Rifle Scope Mount High Profile Scope Mounts for Picatinny Rail (1 inch, Set of 2)

  • Double scope ring mount for Picatinny/ Weaver Rail (21mm)..
  • Design in hollowed-out configuration between the ring and the bottom of the base, to release heavy duty when clamping your scope..
  • Built-in tape inside per rings to prevent from marring the scope, also prevent sliding and holding postion accurately..
  • The ring is for most scopes which are in 1 inch / 25.4mm scope tube. High profile, 0.71 inch gap from base of mount to bottom of rings. ( Item height: 2 inch).
  • With 1 rail clamp screw and 2 scope clamp screw per side, ensure mount any 1 inch scope firmly, just twist off the nut and mount the base on the 21mm rail easily..
Check Stock

Monstrum Picatinny Rail Mount for Savage Axis/Edge Rifles |20 MOA | Old Version Pre 9/2021 Models

  • Please note that as of 9/2021, Savage Arms has altered the drill hole pattern on newly manufactured Savage Axis rifles. Check the serial number on your rifle. For models manufactured before 9/2021 (Serial numbers below N936371), purchase the old Pre 9/2021 compatible mount. For models manufactured after 9/2021 (Serial numbers above N936371), purchase the new Post 9/2021 compatible mount..
  • Picatinny rail mount built specifically for Savage Axis/Axis II/Edge rifle platforms.
  • Allows for the mounting of Picatinny or Weaver standard scope rings, scope mounts, red dots, or other optics.
  • Available in two styles - a 0 MOA mount for zeroing your scope at short to mid range distances and a 20 MOA mount for zeroing your scope at long distances.
  • All Monstrum scope mounts and accessories come with a lifetime guarantee.
Check Stock

EGW Picatinny Rail Scope Mount Savage Rascal

  • Double scope ring mount for 11mm dovetail rail, specialized scope mount for Airgun/.22 Rails..
  • Design in hollowed-out configuration between the ring and the bottom of the base, to release heavy duty when clamping your scope..
  • Lightweight: 1.15oz per ring. High profile, 20mm/0.79in gap from base of mount to bottom of rings. ( Item height: 1.97'').
  • The ring is for most scopes which are in 1''/ 25.4mm scope tube..
  • With only 1 rail clamp screw and 1 scope clamp screw per side, quick and easy to install. Precision and Repeatable Alignment..
Check Stock

EZshoot Reflex Sight with 4 Reticles Red Dot Sight, Reflex Holographic Optic Scope with 20mm Rail Mount ，Absolute Co-Witness

  • ✌【Perfect 1" Scope Rings For 11mm Dovetail Rails】LONSEL 4 set of different heights 1'' scope mount rings include 2 Pcs Medium Profile + 2 Pcs High Profile in one package. These scope rings fit for 3/8'' or 11mm dovetail rails, perfect for mounting most scopes which are In 1''/ 25.4mm scope tube. Available in two styles, A must have scope rings for hunting shooting!.
  • ✌【4 Set Of Two Styles 1'' Scope Rings】2 Pcs Medium Profile: 0.55'' gap from base of mount to bottom of ring, Item Height 1.77'', Dimension 1.61*1.77*0.83 Inch, Weight 1.55 Oz per ring.
  • 2 Pcs High Profile: 0.82'' gap from base of mount to bottom of ring, Item Height 2'', Dimension 1.61*2.0*0.83 Inch, Weight 1.83 Oz per ring..
  • ✌【Built-In Tape Protection & With Stop-Pin Design】 Built-in tape inside per rings to prevent from marring the scope, also prevent sliding and holding postion accurately. One of the high rings and one of the medium rings have a stop pin the bottom, Which prevents the ring from sliding once set..
  • ✌【High Quality Aluminum, Solid & Durable】Precision machining of aircraft grade 6061 aluminum alloy + high strength steel in black matte anodizing finish. Sturdy & lightweight construction, build no wobble, offer durable safe performance in the field..
Check Stock

STARSCOPE Adjustable Monocular Phone Mount - Universal Telescope Phone Adapter Mount | Spotting Scope Telescope Mount for Cell Phone Photography | Adjustable, Clip-On Scope Recording Phone Adapter

  • NEW UPGRADED MINI TELESCOPE CELL PHONE ADAPTER MOUNT - With our new upgraded, adjustable monocular cell phone adapter, you can take perfectly framed, next-level photos with your phone and StarScope powerful monocular for cell phones. The Starscope monocular telescope phone mount secures the handheld spotting scope for cell phone, letting you unleash the photographic power of the super clear StarScope monocular. Designed for StarScope binoculars and telescope for cell phone camera only..
  • NEW UPGRADED MINI TELESCOPE PHONE MOUNT - With our new upgraded, adjustable monocular and binocular cell phone adapter, you can take perfectly framed, next-level photos with your phone and StarScope monocular or binoculars. The mini telescope cell phone adapter secures the monocular scope for cell phone, letting you unleash the photographic power of the super clear Starscope monocular..
  • USE AS TELESCOPE ADAPTER FOR IPHONE, ANDROID, AND MORE - The brand new StarScope mount phone scope adapter for spotting scope securely holds smartphones from 2.2” (58mm) to 3.5” (90mm) wide. The multi-purpose StarScope spotting scope phone mount works to maximize your telephoto mobile photography for professional-quality videos and photos. StarScope phone mount scope clip is the must....
Check Stock

Monstrum Picatinny Rail Mount for Remington 700 Rifles | Long Action | 20 MOA

  • Picatinny rail mount built specifically for Long Action Remington 700 rifle platforms.
  • Compatible with Long Action Remington 700 models only including: 270 Winchester | 300 Win Mag | 30-06 Springfield | 25-06 Remington | 338 Lapua.
  • Scope mount installs directly to receiver via the factory mounting holes and included set screws with no additional hardware required.
  • Available in two styles - a 0 MOA mount for zeroing your scope at short to mid range distances and a 20 MOA mount for zeroing your scope at long distances.
  • All Monstrum scope mounts and accessories come with a lifetime guarantee.
Check Stock

Monstrum Picatinny Rail Mount for Remington 700 Rifles | Long Action | 0 MOA

  • Picatinny rail mount built specifically for Long Action Remington 700 rifle platforms.
  • Compatible with Long Action Remington 700 models only including: 270 Winchester | 300 Win Mag | 30-06 Springfield | 25-06 Remington | 338 Lapua.
  • Scope mount installs directly to receiver via the factory mounting holes and included set screws with no additional hardware required.
  • Available in two styles - a 0 MOA mount for zeroing your scope at short to mid range distances and a 20 MOA mount for zeroing your scope at long distances.
  • All Monstrum scope mounts and accessories come with a lifetime guarantee.
Check Stock