Creality Ender 3 S1 Pro 3D Printer with 300℃ High-Temp Nozzle, Sprite All Metal Direct Drive Extruder, PEI Bed and CR Touch Auto Leveling Print Size 8.6×8.6×10.6in, Upgraded Ender 3 S1

  • ...extremely well in printing flexible flaments like TPU..
  • CR TOUCH AUTO LEVEL SENSOR: CR Touch can completely quickly adjust the nozzle printing height on the hot bed. CR-Touch gets the 16-points auto-levelling program, which can collect more samples than the 9-points of the BLTouch which makes the bed levelling more precise..
  • HIGHER PRINTING PRECISION AND EASY TO USE: Also like Ender 3 S1, Ender3 S1 Pro also has Z-axis dual-screw + Z-axis dual motor design. This can make Ender 3S1 Pro works smoother and more synchronously to lower the possibility of lines and ridges on the sides of your print, thus improving the printing quality. You can also quickly install the printers with 6 steps..
  • Upgraded in all aspects: 4.3 inch colour touch screen for the ender3 s1 pro installed and it takes an user-friendly UI face. LED light allows you to print in the dark environment. The steel spring PEI sheet bed can help you slove the adhesion problem, no need shovel anymore. Filament detection sensor installed and power loss recovery function also supported..
Check Stock

Official Creality Ender 3 S1 Pro 3D Printer with 300℃ High-Temp Nozzle, Sprite All Metal Direct Drive Extruder, PEI Bed and CR Touch Auto Leveling Print Size 8.6×8.6×10.6in, Upgraded Ender 3 S1

  • ...ging of flaments without slipping and works extremely well in printing flexible flaments like TPU..
  • CR-Touch Auto-level Sensor: CRTouch can complete quickly adjust the the nozzle printing height on the hot bed. CR-Touch gets the 16-points auto-leveling program, which can collect more samples than the 9-points of the BLTouch which makes the bed leveling more precise..
  • Higher Printing Precision & Easy to use: Also like Ender 3 S1, Ender3 S1 Pro also has Z-axis dual-screw+Z-axis dual-motor design. This can make Ender 3S1 Pro works smoother and more synchronously to lower the possibility of lines and ridges on the sides of your print, thus improvingthe printing quality. You can also quickly install the printers with 6 steps..
  • Upgraded in All aspects: New 4.3 inch color touch screen installed and it takes an user friendly UI face . LED light allow you print in the dark environment. The Steel Spring PEI sheet Bed can help you slove the adhesion problem, no need shovel anymore. Filament detection sensor installed and power Loss recovery function also supported..
Check Stock

WINSINN 40mm Fan 24V, Ender 3 Fan Upgrade 24 Volt Fans 4010 Hydraulic Bearing, Works with Ender 3 Pro 3X CR-10S (Pack of 5Pcs)

  • ✔️WINSINN 40mm fan 24v which perfect for ender 3 fan upgrade. Fit for Ender-3, Ender-3 Pro, Ender-3S, Ender-3 v2, Ender-3 Max, Ender-5, Ender-5s, Ender-5 Pro, Ender-5 Plus (Installation Position for Motherboard) and Ender-3, Ender-3 Pro, Ender-3S, Ender-3 v2, Ender-3 Max, Ender-5, Ender-5s, Ender-5 Pro, Ender-5 Plus, Ender-6, CR-10 V2., CR-10 v3., CR-X, CR-X Pro, CR-10 Max, CR-10S Pro V2, CR-2020, CR-3040Pro (Installation Position for Nozzle).
  • ✔️High quality Hydraulic Bearings, 2-years Warranty. Balance price and performance, suitable for daily use, life: 35,000 Hours..
  • ✔️Rated Voltage: DC 24V, Current: 0.08A, Power: 1.92W, Speed: 5700PRM, Air Pressure: 3.06mmH₂O, Airflow: 6.4CFM, Noise: 25.3dBA.
  • ✔️Connector & Cable length: XH2.54 – 11.8in(300mm), Size: 40mm x 40mm x 10mm.
  • ✔️Widely Used: Suitable for ventilation of Small PC Case / Router / Raspberry pie / TV box / VR glasses and any small electronic equipment cooling ventilation..
Check Stock

WINSINN 40mm Fan 24V, Ender 3 Fan Upgrade 24 Volt Fans 4010 Dual Ball Bearing, Works with Ender 3 Pro 3X CR-10S (Pack of 5Pcs)

  • ✔️WINSINN 40mm fan 24v which perfect for ender 3 fan upgrade. Fit for Ender-3, Ender-3 Pro, Ender-3S, Ender-3 v2, Ender-3 Max, Ender-5, Ender-5s, Ender-5 Pro, Ender-5 Plus (Installation Position for Motherboard) and Ender-3, Ender-3 Pro, Ender-3S, Ender-3 v2, Ender-3 Max, Ender-5, Ender-5s, Ender-5 Pro, Ender-5 Plus, Ender-6, CR-10 V2., CR-10 v3., CR-X, CR-X Pro, CR-10 Max, CR-10S Pro V2, CR-2020, CR-3040Pro (Installation Position for Nozzle).
  • ✔️High quality Dual Ball Bearings, 5-years Warranty. balance between high air volume and low noise, Suitable for 24 hours / day long-term work, long life: 50,000 Hours..
  • ✔️Rated Voltage: DC 24V, Current: 0.08A, Power: 1.92W, Speed: 5700PRM, Air Pressure: 3.06mmH₂O, Airflow: 6.4CFM, Noise: 25.3dBA.
  • ✔️Connector & Cable length: XH2.54 – 11.8in(300mm), Size: 40mm x 40mm x 10mm.
  • ✔️Widely Used: Suitable for ventilation of Small PC Case / Router / Raspberry pie / TV box / VR glasses and any small electronic equipment cooling ventilation..
Check Stock

WINSINN 40mm RGB Fan 24V, Ender 3 Fan Upgrade 24 Volt Fans LED Colorful 4010 Hydraulic Bearing, Works with Ender 3 Pro 3X CR-10S (Pack of Pcs)

  • ✔️WINSINN 40mm RGB fan which micro size and lightweight design, fast and stable cooling, colorful when it works, bringing you unparalleled experience. So many 3D Printer and DIY enthusiasts are full of praise for it, and it will also be your best choice. The working voltage is 24V, which perfectly compatible a various 3D printer extruder / hotend / nozzle or any DIY cooling and narrow place..
  • ✔️High quality Hydraulic Bearings, 2-years Warranty. Balance price and performance, suitable for daily use, life: 35,000 Hours..
  • ✔️Rated Voltage: DC 24V, Current: 0.05A, Power: 1.2W, Speed: 5000PRM, Air Pressure: 2.31mmH₂O, Airflow: 5.56CFM, Noise: 22.6dBA.
  • ✔️WINSINN 40mm RGB fan 24v which perfect for ender 3 fan upgrade. Fit for Ender-3, Ender-3 Pro, Ender-3S, Ender-3 v2, Ender-3 Max, Ender-5, Ender-5s, Ender-5 Pro, Ender-5 Plus (Installation Position for Motherboard) and Ender-3, Ender-3 Pro, Ender-3S, Ender-3 v2, Ender-3 Max, Ender-5, Ender-5s, Ender-5 Pro, Ender-5 Plus, Ender-6, CR-10 V2., CR-10 v3., CR-X, CR-X Pro, CR-10 Max, CR-10S Pro V2, CR-2020, CR-3040Pro (Installation Position for Nozzle).
  • ✔️Packing List: 4 x 40mm RGB Fan 24v, Connector & Line length: XH2.54 – 11.8in(300mm), Size: 40mm x 40mm x 10mm.
Check Stock

Original Creality Ender 3 V2 Filament Runout Sensor Smart Filament Sensor Break Detection Module Detector for Ender 3 pro Ender 6 CR-10S PRO CR10 V2 V3 Ender3 Max 3D Printer

  • Only used for 32bits motherboard like version 4.2.2, 4.2.7. Suitable for Ender 3/ Ender 3 V2/ Ender 3 pro / Ender 6 / CR-10S PRO/ CR-10 V2 V3/ENDER 3 MAX. But the installation bracket is only used for Ender 3 series, as Ender 6 and cr10s pro printer already have the sensor installation holes or bracket.
  • Independent Modularized Design: it is redesigned with new inner structure. The outer cover is frosted, making it stylish and unique.
  • Filament breakage detection device contains micro switch, using the principle of mechanical proximity switch, no friction, can ensure the smooth feeding of filaments..
  • Precise Detection: Blue LED indicates normal filament feed-in.
  • Blue LED turns off when filament runs out..
  • IMPORTANT: For Ender 3 V2, Ender 3 and Ender 3 pro, you need to flash your motherboard's firmware before using, about the firmware download way, please check the following description or the instrument in the pack. as Ender 6 and CR10S PRO printer's firmware has been setted with filament detection function, so you can use them directly..
  • Package: 1 filament detector sensor, 1 extended cable, 1 installation bracket(This bracket is only used for Ender 3 / V2 / Pro, Filament detection bracket or holes already set up in the Ender 6 and CR10S PRO).
Check Stock

Creality Ender 3 V2 Upgrades V4.2.7 Silent Board 32 Bit Silent Mainboard with TMC2225 Drivers Compatible for Creality Ender 3 Ender 3 Pro Ender 5 Ender 5 Pro 3D Printer

  • NOTE: If you want to install this V4.2.7 silent motherboard on the printer, you need to flash the motherboard firmware to work properly. You can....
  • Firmware Pre-Installed Only for Ender3 V2 - Marlin 2.0.1 and firmware(not BLTouch version) for Ender-3 V2 comes pre-installed on this board. If your....
  • Update the Motherboard Firmware - Please copy the firmware file to a formated SD card with no other files in it. Turn off the printer and unplug the....
  • Noiseless - TMC ultra-slience chip, effectively eliminates noise. Low-decibel operation keeps the motherboard running. Using high-quality MOS tube,....
  • High Performance - Equipped with STMicroelectronics 32-bit MCU, which brings a new experience. Connect to temperature sensor via smart fanEnable....
Check Stock

3D Parts Heater Bed of Ender 3 / Ender 3 Pro 3D Printer Replacement Parts Aluminum MK3 Heatbed Hotbed Platform with Heated Bed Cable Line for Ender 3 V2/ Ender-3 /Ender 3 Pro

  • Ender 3 Replacement Heater Bed DC 24V 220W with Cable Installed for Creality 3D Printer Ender 3/Ender 3 Pro / Ender 3X.
  • Original 3D Printer Ender 3 Replacement Parts / 3D Printer Accessories for Ender 3 / Ender 3 Pro / Ender 3X.
  • Ender 3 Pro Hotbed with Cable Which be Installed Well. Build Surface with 3M Adhesive which easily to stick on the heater bed platform..
  • 3D Printer Ender 3 Replacement Heater Bed with Free Technical Support..
Check Stock

SainSmart Large 3D Printer Enclosure, 20.9'' x 24.2\ x 28.9\

  • Consistent Temperature: The SainSmart 3D Printer Enclosure reduces heat losses and prevents external factors that might alter your prints, keeping the printing area at a consistent temperature, delivering stable and smooth printing results..
  • Noise & Dust Reduction: A enclosure helps to reduce the annoying fan noise while printing, making it more viable for home and school use. It also protects your printers from dust..
  • Safe to Use: The lining of enclosure uses pure aluminum film material, equipped with stainless steel supports, stable structure and a large space. Folding storage, easy to install and carry..
  • Better organize your printing area: the enclosure is equipped with multiple tool pockets and holders on each side, keeping your printing area clean and tidy..
  • With a large area measuring 73.5cm x 61.5cm x 53cm (20.9'' x 24.2" x 28.9"), this enclosure is compatible with Ender-3, Ender-3 Pro, Ender-3 V2, Ender-3 V2 Neo, Ender-3 S1 Pro, Ender-3 Max, Ender-3 Max Neo, Ender-5 Pro, CR-6 SE, CR-10, CR-10 Smart Pro..
Check Stock

Creality Ender 3 Glass Bed Upgraded Build Surface Plate, 235x235x4mm

  • No Edge Curling - 3D printer coated glass bed, molds could stick on bed firmly without glue, avoiding the issue of print edges curling. A necessary 3d printer upgrade parts..
  • No-indentation Printing - Upgraded Ender 3 glass plate has a much smaller CREALITY logo than older version, avoiding leaving logo indentations on molds surface during 3D printing..
  • Excellent Flatness - Improved 3D printer glass plate provides more flat and more smooth build surface than magnetic mat or pei sticker, ensuring high flatness for the bottom of model..
  • Super Convenient - Very easy to take off the model, no tools needed. This borosilicate glass bed could be fixed with middle sized clips and cleaned with alcohol or acetone at room temperature..
  • Compatibility - The 3D printer parts is applicable with Creality 3D printer Ender-3, Ender-3 Pro, Ender-3S, Ender-3X, Ender-3 V2, Ender-5, Ender-5 Pro and CR-20, CR-20 Pro, pls confirm if this borosilicate glass bed compatible with your printer..
Check Stock

HICTOP Ender 3 Heater Cartridge 24V 40W for Creality Ender 3 Ender 3 Pro Ender 5 CR-10S Pro 3D Printer Prusa Mendel (Pack of 3)

  • ender 3 heater cartridge material : Stainless steel (304).
  • 24V heater cartridge voltage and power : 24V/40W..
  • Application of the 24v heater cartridge 40W: Creality ender 3, ender 3 Pro, ender 6 CR-10S Pro etc. 3D Printers Prusa Mendel.
  • Diameter of the ender 3 pro heater cartridge : 6mm. Length: 20mm,Wire Length:1M.
  • Temperature of the ender 3 V2 heater cartridge: It can take up to 280 ° C.
Check Stock

Official Creality Ender 5 Pro Upgrade 3D Printer with Silent Motherboard Metal Extruder Frame and Capricorn Bowden PTFE Tubing 220 x 220 x 300mm

  • Upgraded Metal Print Head Frame: The upgraded metal print head of creality ender 5 pro has better and stronger pressure, which can push the filament....
  • Silent Motherboard: Official ender 5 pro has ultra-quiet motherboard, quieter and more precise. The upgraded motherboard has solid filters and....
  • Dual Y Axis, Stable Output: Creality ender 5 pro with dual Y-axis control system, synchronous operation, stable output, ensuring high performance and....
  • Brand Power Supply: Ender 5 pro built-in brand power supply, which can be heated quickly and safely. The hot bed can be heated to 110°C within 5....
  • Resume Print Function: When the power is restored, creality ender 5 pro 3d printer will continue to print from the interruption point..
Check Stock

HICTOP Ender 3 pro Upgrades Glass Bed Double Sided Upgraded Tempered Glass Bed 235x235 for Ender 3 Ender 3 Pro Ender 5 CR-20 Pro 3D Printer (235 * 235)

  • HICTOP Ender 3 pro glass bed is coated on both sides and both sides can be used. Buying one plate gets you two usable sides, doubling your value.
  • Excellent adhesion when the temperature of the heated bed is about 50℃, you can print directly on the HICTOP glass bed without using any glue or other tools to help the model to stick on to the bed. You do not need to worry about the prints curling if the temperature of the hot bed is no less than 50℃.
  • It is super easy to remove the models when the temperature of the glass goes back to room temperature, you do not need to use removal tools even if you are printing big model on our HICTOP glass bed. Please do not try to remove the model before the plate cools to room temperature.
  • The size of HICTOP glass bed is 235*235mm(9.25*9.25inch), it can work with Creality 3D printers such as the Ender-3 Pro, Ender-3 V2,Ender-3, Ender-3S, Ender-3X, Ender-5, Ender-5 Pro,CR-20, CR-20 Pro and other similarly sized printers.
  • The surface of HICTOP glass bed is smooth without ripples, and there is no residue after the model is removed, it is also more durable than a superplate surface.
Check Stock