Categories

Best Blue Module Display

5 Pieces I2C Display Module 0.91 Inch I2C OLED Display Module Blue I2C OLED Screen Driver DC 3.3V~5V(Blue Display Color)

  • What will you get: there are 5 pieces OLED display module with blue display color, self-illuminated and no need backlight.
  • Power-saving display: the I2c oled display performs better than the traditional LCD display and with lower consumption sicne the IIC (I2C communications) simplifies connections.
  • Please note that these I2C OLED display module comes without pin headers.
  • More details: use compatible with Arduino, ESP8266, ESP32, STM32, etc..
  • Good compatibility: this i2c oled display module is compatitable with Raspberry Pi 4B/3B+/3B/2B/Zero, compatitable with Arduino, also compatitable for ESP8266, ESP32, STM32, etc..
  • Product manual: as shown in the instructions.
Check Stock

ACEIRMC 2pcs 1602 LCD Keypad Shield 1602 LCD Expansion Shield Board Blue Backlight 4.5-5.5V for Arduino R3 MEGA2560 Nano Due Duemilanove Robot (5pcs)

  • 1602 LCD Shield Module Display V3 for Arduino R3 MEGA2560 Nano DUE.
  • This is a 16x2 LCD Keypad module for Arduino Diecimila Duemilanove,MEGA1280, MEGA2560 board..
  • Blue Backlight with white words, adjustable backlighting.
  • 4 Bit LCD Library,V3 design, pins out for easy connecting.
  • 1602 LCD Keypad Shield 1602 LCD Expansion Shield Board Blue Backlight 4.5-5.5V for Arduino Duemilanove Robot.
Check Stock

LCD Touch Panels Touchpanel Analog For DOGXL160 (EA TOUCH160-1)

  • ♛ The Display Module is 5V compatible, use with 3.3V or 5V logic.
  • ♛ The Display Module can support analog S P I and hardware S P I.
  • ♛ The Display Module is designed with one socket for sd card.
  • ♛ With P C B plate (including power supply IC, SD), compatible with 5110 interface.
  • ♛ This is a new 2.8 inch serial S P I color display module without touch function.
Check Stock

HiLetgo 1602 LCD Keypad Shield 1602 LCD Expansion Shield Board Blue Backlight 4.5-5.5V for Arduino Duemilanove Robot

  • ☆ Premium Quality: Made of premium material, this lcd module display is sturdy, not easy to aging and abrasion resistant, to ensure maximum strength and durability for long lasting usage.
  • ☆ TFT LCD Serial Port Module : The lcd display module is a new 2.8 inch serial SPI color display module. Designed with one socket for sd card and PCB adapter for LCD.
  • ☆ Come With PCB Plate: With PCB plate (including power supply IC, SD), pcb display module is compatible with 5110 interface. Resolution: 128x160.
  • ☆ Support Analog & Hardware SPI: This tft display module supports analog SPI and hardware SPI, less I/O port need. It can be driven by 8051 / AVR / PIC /ARM/STM32. It can be driven with at least four IO.
  • ☆ What You Will Get: If you need the document to download, please contact us. We stand behind all of our them with a 100% product guarantee and promise to give you the best in customer care.
Check Stock

Gel Heating Machine,Portable PRP PPP Gel Maker Heater,Plasma Bio-Filler Equipment,Instrument Autologous Serum Filler with Digital Display for Laboratory Hospital

  • 【Intelligent Function】Gel heating machine has real-time temperature display, time countdown display, automatic fault detection and buzzer alarm function, temperature deviation calibration function, and built-in over-temperature protection device. Features:Voltage: 110v/60Hz,Temperature range: room temperature + 5℃~100℃,Time range: 1min~99h59min/∞,Temperature accuracy: ≤±0.3℃,Display accuracy: 0.1℃,Heating time: ≤12min (25℃ to 100℃),Power: 150 watts,Fuse: 250V 3AФ5×20,Size: 10x7.7x6in,Net weight: 2.5 kg..
  • 【LCD Display】Portable PRP PPP gel maker heater has easy module replacement, easy to clean and disinfect, beautiful appearance, blue LCD display instant parameter information..
  • 【High Precision, Automatic Recovery Function】Optional power failure automatic recovery function, automatic start running function, improve efficiency, intelligent algorithm, ensure the whole process temperature control accuracy ≤ +03C, effectively reduce the experimental error..
  • 【Multiple Protection】Plasma bio-filler equipment can ensure the stability of long-term operation and safety in the case of unattended op....
Check Stock

FDSF Diy In12 In-12 Nixie Tube Pcba Kit Digital Clock Beautiful Gift,No Tubes

  • 2.12/24 hour module: Click "Up" key to change.
  • 3.Sleep module. Long Press "UP", while no display , into sleep module(22:00~07:00 no display. 07:00~22:00 display). Display all "0"number,out of sleep module..
  • 1.Set : Long Press "Down" key into setting . Click "Up","Down" to select , and Long Press "Down" key to finish..
  • 4.Set back color: Click "Down" to change color. when color refresh that means it is into change color automatic (every day change one color),or color is fixed..
Check Stock

DORHEA 5PCS TM1637 0.56\ 4 Bits Digital LED Display Module with Clock Display 0.36 inch Common Anode Red Digital Tube Board with Cable for Arduino Raspberry Pi DIY Kits

  • The module is a 12 foot with a clock point four common anode tube (0.36 in.) display module driver IC is TM1637 driver IC TM1637, only two signal lines can make the MCU control 4 8 digital tube..
  • Display device is a total of 4 red LED word tube. Digital tube 8 grayscale adjustable. Control interface level can be 5V or 3.3V..
  • 4-digit LED display module with LED brightness adjustable and clock point, can be used to display decimal, letters and so on, suitable for uses in induction cooker, micro-wave oven and small household electrical appliance..
  • Total 4 pins (GND, VCC, DIO, CLK), GND to ground, VCC for the power supply, DIO for the data input and output pins, CLK for the clock signal pin..
  • The Positioning holes in this LED Display Module 4 Bits has 4 M2 screws positioning hole diameter is 2.2mm and the positioning of the module is easy to install with easy to achieve the inter-module combination..
Check Stock

2 Pieces Digital FM Transmitter Module Stereo FM Transmitter DSP PLL 76.0 -108.0MHz Stereo Frequency Modulation with LCD Display Line/USB/Mic Input, DC 3.0V - 5.0V

  • Good performance: thanks to the DSP and PLL technology, these multi-functional stereo FM transmitter modules can provide you with quality stereo.
  • Practical design: the FM transmitter module has a blue backlit LCD display, allowing you to clearly see the value in a dark environment.
  • The power consumption is extremely low, and noise interference is small.
  • Suitable for: this digital FM transmitter supports line/USB/mic channel input, its transmitting frequency range is 76.0~108.0 MHz, and the frequency response range is from 50 Hz to 18 KHz.
  • Frequency adjustment stepping is 0.1 MHz/ times when short press the key and 1.0 MHz/ times for long press.
  • Wide uses: the digital FM transmitter module can be applied to FM wireless, USB PC broadcast, maternal and child monitoring, wireless microphone and much more.
  • Warm notice: please confirm whether the power polarity and power voltage are correct before turning on the power.
  • If the input voltage exceeds 5V or the positive and negative poles of the power supply are connected reversely, it may cause permanent destroy to the module.
  • Do not touch the components on the back of the module while working, so as not to affect the normal operation of the module.
Check Stock

12 x 5ml PRP PPP Gel Heating Machine,Portable Gel Maker Heater Plasma Bio-Filler Equipment Professional Gel Heating Machine 110V 10.23x7.67x5.9inch

  • ★PRP gel preparation machine is the best design product controlled by microprocessor. It can be widely used for sample storage and reaction, PRP gel preparation, DNA-amplification, electrophoresis-pre-denaturation and serum-coagulation..
  • ★ Real-time temperature display, time countdown display, automatic fault detection and buzzer alarm function, temperature deviation calibration function, built-in over-temperature protection device..
  • ★Convenient module replacement, easy to clean, beautiful appearance, blue LCD display instant parameter information..
  • ★Optional power-off automatic recovery function, auto-start operation function, improve working efficiency, intelligent algorithm, ensure the temperature control accuracy of ≤+03C in the whole process range, effectively reduce experimental error..
  • ★Multiple safety protection to ensure the stability of long-term operation and safety under unattended conditions, and support the custom calibration function of module classification.★ Our products are shipped from the US and can be delivered quickly,Delivery time will take....
Check Stock

Basic 16x2 Character LCD - RGB Backlight 5V

  • DRIVER IC: The module driver IC is for AIP650 (compatible for TM650), as well as supports multiple display characters..
  • 4 DIGIT 7 SEGMENT: The digital tube display module is designed for 4 digit 7 segment, with stable and reliable performance..
  • CONTROL INTERFACE: With 4 pins, SDA is bidirectional data line, SCL is clock line, GND is for ground line, and VCC is power supply..
  • COMPACT STRUCTURE: The LED digital tube module is exquisite and compact, which can be flexibly used in a variety of situations..
  • WIDE APPLICATION: This module is suitable for Raspberry Pi 3 B+ 4, for DIY electronic devices, toy cars and instrumentation etc..
Check Stock

Character LCD Module 16x2 RGB Backlight for Arduino

  • Displays 2-lines X 16-characters, Blue display with white letters which provide Wide viewing angle and high contrast..
  • Operates from 5V DC so you can connect directly to arduino board..
  • Built-in industry standard HD44780 equivalent LCD controller..
  • Comes with hookup and operation documentation..
Check Stock

JM Set of 3 pcs Transparent 3D Floating Frame Display Holder/Box/Frames for Challenge Coins, AA Medallions, Antique, Jewelry,Gift, White, 2.75 x 2.75 x 0.75 Inches

  • What will you get: there are 5 pieces OLED display module with classic display color, self-illuminated and no need backlight.
  • Power-saving display: the I2C oled display performs better than the traditional LCD display and with lower consumption the IIC (I2C communications) simplifies connections.
  • Please note that these I2C OLED display module comes without pin headers.
  • More details: use compatible with Arduino, ESP8266, ESP32, STM32, etc..
  • Good compatibility: this i2c oled display module is compatible with Raspberry Pi 4B/3B+/3B/2B/Zero, compatible with Arduino, also compatible with ESP8266, ESP32, STM32, etc..
  • Product manual: as shown in the instructions.
Check Stock

Key Display for AVR 8-Bit Digital LED Tube 8-Bit TM1638 Module

  • DRIVER IC: The module driver IC is for AIP650 (compatible for TM650), as well as supports multiple display characters..
  • 4 DIGIT 7 SEGMENT: The digital tube display module is designed for 4 digit 7 segment, with stable and reliable performance..
  • CONTROL INTERFACE: With 4 pins, SDA is bidirectional data line, SCL is clock line, GND is for ground line, and VCC is power supply..
  • COMPACT STRUCTURE: The LED digital tube module is exquisite and compact, which can be flexibly used in a variety of situations..
  • WIDE APPLICATION: This module is suitable for 3 B+ 4, for DIY electronic devices, toy cars and instrumentation etc..
Check Stock