Categories

Best Bmg Extruder Gear Kit

Creality Sprite Direct Drive Extruder Kit for Creality Ender 3/Ender 3 V2/Ender 3 Pro/Ender 3 S1/Ender 3 Max/CR-10 Smart Pro 3D Printers

  • Compatible： Creality Sprite direct drive extruder upgrade kit compatible with Ender 3, Ender3v2, Ender 3 pro and Ender 3 Max..
  • Double gear feeding, stable and reliable： The double tooth structure makes the feeding is more reliable and stable. Reduces the chance of clogged nozzles when retracting consumables and failures when loading new consumables. Full metal hot end kit with heating block, titanium throat and cooling block, allowing you to print high temperature materials up to 300°C.
  • Large Torque, Extrusion Force Up to 80N - The use of gear with 3.5:1 gear ratio which perfectly matches with motor makes extrusion force up to 80N (depending on filaments). More precise control of feeding withdrawal..
  • Support Printing Flexible and High Temperature Filament ： With direct drive extruder and up to 300°C all metal hotend kit, the Spirit direct drive extruder upgrade kit supports 1.75 MM filaments, including PLA, TPU, PETG, ABS, PA, PC etc..
  • After-sales Service： Life-time professional technical supports, If you encounter unsolvable problems during installation and use, please f....
Check Stock

Creality Sprite Direct Drive Extruder Pro Kit, All Metal Extruder Upgrade Kit for Ender 3/Ender 3 v2/Ender 3 Pro/Ender 3 Max 3D Printer,Dual Gear Dual Fan Design,Support BL Touch/CR Touch

  • 【All Metal Design-High Temperature Printing】Creality Sprite direct drive extruder pro kit perfectly combine extruder and all metal hotend, enables all the Ender-3 series 3D printers a direct extrusion and high temperature printing conditions..
  • 【Dual Gear Feeding- Powerful & Stable】This direct drive extruder adapts double-toothed structure which does not damage filaments, allowing more reliable and stable feeding. The use of gear with 3.5:1 gear ratio which perfectly matches with motor makes extruder force up to 80N. More precise control of feeding withdrawal..
  • 【Small and Exquisite, Bowden & Direct Extrusion Suitable】With Compact and light weight design, 54x50x64.3mm small size, 288g weight. It can be applied to direct and bowden filament feeding to meet printing needs of users at dirct and bowden extrusion. Better effect for PLA, PETG,ABS, TPU and other flexible filament..
  • 【Dual Fan-Efficient Heat Dissipation】Simulation of flow field mechanics and dual fan design results in powerful heat dissipation function and more stable model formation. High quality silent fan with metal fan cover, ensures s....
Check Stock

WINSINN Dual Gear Extruder Ender 3 v2 Upgrade Motor Shaft>20mm Compatible with Ender 3 Pro CR10 Series 3D Printer TPU Filament Drive Feed

  • ✔️【Purchase Note】ONLY for 3D Printers with motor shaft over 20mm, please measure the shaft length before placing order. Due to Creality....
  • ✔️【Replacement Kit】Perfect extruder replacement kit for Ender 3 v2, Ender 3 Pro, Ender 3, Ender 5 Pro, CR10 S series, Tornado, etc..
  • ✔️【Stable And Durable】Upgraded extruder kit made of aluminum alloy material, more stable and durable than the other plastic one while working.....
  • ✔️【Kindly Reminder】Please calibrate the E-steps from 100 to 139..
  • ✔️【Packing List & Warranty】1 x Dual Gear Extruder (This Kit NOT include the stepper motor, motor bracket and instruction manual). 1 Year....
Check Stock

Bowden Extruder V2.0 DDB Universal Geared Extruder Dual Drive Extruder for 3D Printer

  • Kit includes: 1pc Universal Geared Extruder, 1pc Screws package, 1pc Installation tools package, 1pc Stepper motor mounting bracket.
  • Upgraded High performance extruder for 3D Printer.
  • Upgrade Highlights: 1. The position of the gear and the accuracy of all screw holes are calibrated. 2. Modified the new buckle, both sides of the V2.0....
  • 3. The filament has an independent motion cabin inside the extruder. The new white filament guide inside the extruder is helping the filament running....
  • Please make sure Gears are Installed and Precisely Aligned before printing, they will perform successfully.
Check Stock

Bowden Extruder V2.1 RNC Nano Coated Gear DDB Universal Geared Extruder for 3D Printer

  • Kit includes: 1pc Universal Geared Extruder w/ RNC Nano Coated Gear, 1pc Screws package, 1pc Installation tools package, 1pc Stepper motor mounting bracket.
  • Upgraded High performance extruder for 3D Printer.
  • Upgrade Highlights: 1. The position of the gears and the accuracy of all screw holes are calibrated. 2. Modified the new buckle, both sides of the V2.1 version of the DDB extruder support filament running thru in and out (it has no specified direction, and you are able to use either side of the material ports).
  • 3. The filament has an independent motion cabin inside the extruder. The new white filament guide inside the extruder is helping the filament running smoothly. 4. The new outer shell design with edge cut on the top of the extruder is reserved for the screw rod of Ender 3 printer. 5. Upgraded shell using new mixed materials.
  • ***Please make sure Gears are Installed and Precisely Aligned before printing, they will perform successfully.
Check Stock

Zeberoxyz Upgrade Dual Gear Version Direct Drive Extruder Support Plate Easy Print Flexible Filament for Creality Ender 3 V2 Ender 3 Pro,Ender-3,CR-10,CR-10S 3D Printer Dual Gear Support Plate

  • Material: Plate is made of high quality cold rolled sheet material,long service life, fine workmanship.
  • Filament: More material options,easy to print TPU flexible filament.
  • Advantages: A direct drive kit with dual gear extruder improves extrusion and retraction.
  • Widely Used: for Creality Ender 3/ Ender 3 V2/ Ender-3 PRO/ CR10/ CR10S 3D Printers, Only Suitable for Dual Gear Version Pulley Extruder.
  • Package Content: 1pcs Dual Gear direct extruder support plate, 1pcs Length 60cm motor extension cable (one end is female and the other is male), 2pcs....
Check Stock

Official 3D Printer Extruder Upgraded Aluminum Drive Feed Extruders Accessories for 3D Printer 1.75mm Filament Works with Creality CR-10 Series Ender 5 Series Ender 3 Series

  • ✔️Durable Material -- High quality aluminum alloy material and sandblast to surface oxidization, ensuring this red extruder is last for long term....
  • ✔️New Upgraded Design -- The upgraded red extruder has removed pneumatic joint so as to increase gear density, preventing the joint fracture....
  • ✔️Improved Performance -- The optimized extruder with metal extrusion and original hot-end kit pushes the filament into printer nozzle, greatly....
  • ✔️Install Easily -- You just remove the old Creality extruder & screw and then install the new red extruder. All the necessary accessories are....
  • ✔️Wide Compatibility -- Red extruder is suitable for Creality 3d printers accessories: Ender-3 series, Ender-5 series, CR-10S, CR-10, CR-10mini,....
Check Stock

Creality Official Ender 3 Extruder Upgraded and 1M Capricorn Bowden PTFE Tubing 1.75mm 3D Printer Accessories Kit with Bed-Level Spring & Tube Cutter, 4 in 1 Package for Ender-3 Series CR-10 Series

  • ✔️【Quality Assurance】Creality 100% official aluminum extruder is lightweight and strong, ensuring a more even feed rate over time as well as resisting wear. Removed pneumatic joint so as to increase gear density, it makes loading the filament easier and smoother. Our extruder kits have an adjustable bolt so that you can adjust the pressure of the extruder gear as needed..
  • ✔️【Original Capricorn PTFE Tube】Capricorn PTFE is well regarded as the highest quality PTFE tubing in all 3D printing. The tight tolerances make sure that the filament is lead directly to the hotend with as little room for error as possible between the extruder and the hot end..
  • ✔️【Great Value Spare Parts】4pcs Upgraded bed-level springs are made of high-quality spring steel, fatigue and heat-resistant, durable for use. They will allow you to print at a higher speed without worrying about any wobble. One PTFE cutter with an extra sharp razor is also included to ensure that the tube is cut flat on both sides..
  • ✔️【Easy To Install】DIY kit and you need to assemble by yourself. The full installation kit for the extruder is include....
Check Stock

Creality Upgraded MK-8 Metal Feeder Extruder Frame Aluminum Gray Bowden Extruder Drive for Creality Ender 3/3 Pro/3V2/5/5 Plus, CR-10 Series, CR -10S/20/20 Pro 3D Printer

  • WIDE APPLICATION: The extruder feeder drive is compatible with nearly all models of 3D printers. No need to change stepper motors or other mounting hardware. Suitable for Creality 3D Printers Ender 3/3 Pro, Ender 3 V2, Ender 3 Max, Ender 5/5 Plus/5 Pro, CR-10, CR-10 V2, CR-10 Max, CR-10 S4, CR-10 S5, CR-10S, CR-10 Plus, CR-X, CR 20/20 Pro..
  • ADVANTAGES: Pushing the filament into the printer nozzle with more pressure to improve the performance of the printer. The bolt of our extruder kits is adjustable so that you can adjust the pressure of the extruder gear as needed..
  • EASY TO INSTALL: All you do is unbolt the old original Creality plastic extruder & screw in the new Metal Extruder and ready to start printing. This extruder DIY kit comes with an instruction on how to put it together, which makes it easier to install. Used for 1.75mm filament of 3D printer MK8 Bowden extruder frame..
  • STABLE: All-metal aluminum alloy, DIY aluminum block and you need to be assembled by yourself. Giving a much smoother travel and print quality. Fits a 1.75mm filament..
  • CUSTOMER SUPPORT - If you have any problems with our product, please feel free to contact us. We will respond within 24 hours and offer professional technical support to you..
Check Stock

Befenybay Upgrade Direct Dual Gear Extruder Support Kit Easy Print Flexible Filament for Creality Ender 5 /Ender 5 Pro/Ender 5 Plus 3D Printer Plate +Dual Gear

  • 【Material】Plate is made of high quality cold rolled sheet material.
  • 【Advantage】A direct drive extruder improves extrusion and retraction.
  • 【Widely Used】Used for Ender 5 /Ender 5 Pro /Ender 5 Plus 3d printer upgrade direct dual gear extruder.
  • 【Filament】More material options,easy to print TPU flexible filament.
  • 【Package Include】1kit direct extruder support plate with 4pcs pulleys, 1pcs length 60cm motor extension cable(one end is female and the other is....
Check Stock

Official Upgraded Ender 3 v2 Ender 3 CR-10 All Metal Extruder Aluminum MK8 Bowden Extruder 40 Teeth Drive Gear for Creality Ender 3 Pro/Ender 5/ CR-10 Series 3D Printer

  • The gray metal extruder is an original upgrade replacement part for Ender 3, Ender 3 Pro,Ender 5,CR-10, CR-10S, CR-10 S4, CR-10 S5, CR-10 Mini, CR-10S, CR-10 Plus..
  • Works better than original plastic stock extruder, make loading filament much easier. Even smoother than the red metal extruder..
  • Compatible with PLA/ABS/Wood/TPU/PTEG, 40 Teeth drive gear feeds the 1.75mm filament very smoothy..
  • Easy to Install. The extruder diy kit comes with a instruction on how to put it together, which makes it more easy to install..
  • 100% brand new and original Creality exturder. If you have any question, please feel free to contact us..
Check Stock

BIQU H2 Extruder V2.0 New Upgraded Dual Gear Extruder 3D Printer Dual Drive Feed Not Stuck for Creality Ender&CR Series Printers Geeetech Anycubic Mega S Printers and Prusa I3 DIY 3D Printer Kits

  • √【Upgraded Gear Is No Longer Stuck】①The design of output gear modulus is changed from 0.5 to 0.25, reducing gear outer diameter,which can....
  • √【The Advantages of Upgraded Stainless Steel Gear】H2 extruder V2.0 is upgraded to new high quality stainless steel output and transmission gears....
  • √【Brand New Titanium&Copper Alloy Heat Break】BIQU H2 extruder V2.0 adopt titanium&copper alloy all metal heat break, the best quality material....
  • √【High Performance Unique Cooling System】The heat sink structure on H2 extruder V2.0 is optimized to ensure airflow is diverted up and away from....
  • √【Wide Compatibility】H2 extruder has wide compatibility for variety 3D printer on the market like Creality Ender & CR Series Printers, Geeetech,....
Check Stock

Micro Swiss Direct Drive Extruder for Creality Ender 5

  • 【Official New Product from Creality】Sprite Extruder Pro Upgrade Kit enables all Ender 3 series 3D printers to have direct extrusion and high temperature printing conditions..
  • 【Better new design】Simulation of flow field mechanics and dual fan design results in powerful heat dissipation function and more stable model formation..
  • 【Double gear feeding, stable and reliable】The double tooth structure does not damage the consumables, and the feeding is more reliable and stable. Reduces the chance of clogged nozzles when retracting consumables and failures when loading new consumables. Full metal hot end kit with heating block, titanium throat and cooling block, allowing you to print high temperature materials up to 300°C..
  • 【Easy to install, more adaptable】Adaptable, Ender 3/Ender 3 V2/Ender 3 Pro/Ender 3 S1/Ender 3 Max/CR-10 Smart Pro 3D Printers, easy to install and use. It does not affect the inherent nature of the printer function as it is a complete extrusion kit. Comes with a long extruder motor connection cable, tools, accessories and wiring diagram instructions for installation and easy assembly..
Check Stock