Categories

Best Bmpcc 4k Cage Kit

MAGICRIG BMPCC 4K /6K Cage with NATO Handle + T5 SSD Card Mount Clamp for Blackmagic Pocket Cinema Camera BMPCC 4K /6K

  • MagicRig Cage Kit for Blackmagic Design Pocket Cinema Camera 4K & 6K. This cage of anti-twisting and excellent heat dissipation for better shooting without making any damage to your valuable camera.【Not for BMPCC 6K Pro!】.
  • Perfectly compatible - Form-fitting design with unobstructed battery & SD card access. Securely locked by 1/4'' screws on the top and bottom, with additional locating pins and rubber pads on the base plate to prevent twisting..
  • Multiple mounting interfaces. The cage is equipped with multiple 1/4'' and 3/8'' screw holes that can be used to install monitors, microphones, flash and other accessories..
  • T5 SSD card holder. Two M5 knob screws are used to lock the T5 SSD and its USB-C cable. There are a variety of mounting options to give you more options. The mount can be mounted on the camera mount with two M4 screws or Two 1/4" screws..
  • It consists of a cage with a NATO handle and a T5 card holder. This handle is equipped with the hole pattern for ARRI accessory mount pins, you can attach compatible extension blocks, als....
Check Stock

SMALLRIG Monitor Mount EVF Holder Support with Locating Pins for ARRI Standard - 2174

  • 【FOR MONITOR】 SMALLRIG Monitor Mount 2174 is designed to hold your monitor onto any cage or handle via 3/8″threaded hole for ARRI standard. It enables the cameraman to have better monitoring as per the needs in different shooting scenarios..
  • NOTE】The monitor mount is compatible with 5 inch or 7 inch monitor and supports monitor up to 1.5kg. Also, if a cage haven’t locating holes for ARRI standard, you can mount optional Mini Plate 2171 via two 1/4″ threaded holes first, then it allows to attach the monitor mount 2174..
  • 【ROTATION ADJUSTMENT】 Rotation axis enables this monitor holder to adjust the position of monitor up to 180° with only one hand for better monitoring as per your needs at different directions during shooting..
  • COMPATIBLITY】 The SMALLRIG monitor mount is compatible to SMALLRIG A7III Cage 2087, BMPCC 4K Cage 2203, Z6 / Z7 Cage 2243, D850 Cage 2129, NATO Handle1955 and any cage or handle with 3/8 locating holes..
  • 【TOOLLESS INSTALLATION】 The monitor mount connect cage can be tighten by hands via the thumbscrew, which provide a quick release for users. Also, it comes with a hole for using the Allen wrench to re-tighten it..
Check Stock

MAGICRIG Camera Cage Kit Compatible with BMPCC 6K Pro & 6K G2 for Blackmagic Pocket Cinema Camera 6K Pro & 6K G2

  • 【For BMPCC 6K Pro / 6K G2】MAGICRIG Camera Accessory Kit is specially designed for BMPCC 6K Pro / 6K G2. The cage secures to the camera via a 1/4’’ screw on the top and two 1/4'' screws on the bottom to prevent wiggles, and comes with rubber pad at the bottom to protect the camera from scratching..
  • 【Multiple mounting points】The MAGICRIG cage with abundance of 1/4’’ and 3/8'' thread holes and several ARRI-style mounts for mounting additional accessories, such as ball head, rod clamp, magic arm, handle, etc..
  • 【Full accessibility】The cage would not block any buttons on the camera and you are able to access not only the battery but even the audio slot, USB-port, HDMI-port..
  • 【Top Handle】This handle can be fixed on the top or side of the camera cage with 2pcs 1/4'' screws. This handle comes with an allen wrench on the side, which attaches via magnet inside the handle. You can use it for different purposes, you can loosen those screws on the other side and can change front to back orientation according to your need..
Check Stock

SMALLRIG Camera Cage Accessory Kit for BMPCC 6K Pro, with Top Handle Wooden Side Handle HDMI Cable Clamp SSD Clamp Sunhood NATO Rail Screen Protector for Blackmagic Pocket Cinema Camera 6K Pro- 3299

  • 【For BMPCC 6K Pro】SmallRig Camera Accessory Kit 3299 is specially designed for BMPCC 6K Pro. The package include Camera Cage 3270/Top Handle 2362/Side Handle 2187/Sunhood 3273/SSD Cable Clamp 3300/HDMI Cable Clamp 3271/NATO Rail 2172/Screen Protector 3274..
  • 【Mutifuctional Cage】Special designed aluminum-alloy full cage 3270 can be split as a half cage.The built-in Mount for T5 SSD takes up very little space and improves compactness and suits SSD & USB-C cable clamp to ensure stability and smooth data transmission while shooting. Featuring with multiple 1/4"-20 threaded holes that support additional camera accessories. The threaded holes on the bottom support to attach Quick Release Plates 1280 & 2146 and stabilizer of DJI RS2..
  • 【NATO Top Handle & Side Handle】The NATO top handle 2362 can rotate 360 degrees and secures to any cage with nato rail on the top or side, and features multiple 1/4"-20 and 3/8"-16 threaded holes for accessory attachment. The NATO side handle 2187 fits the curve of hands for a comfortable grip and is designed for quick assemble and disassembly..
  • 【Screen Protect】The sunhood 3327 is easily removable and does not interfere with the flip of the screen, hence a better screen display under strong outdoor light. Besides, t....
Check Stock

DSTE Blackmagic Design Pocket Cinema Camera 6K/4K Battery Grip with 3pcs LP-E6 Battery

  • The grip mounts on the bottom of the BMPCC 6K or 4K camera and features a sleek.
Check Stock

Neewer Camera Cage Compatible with Blackmagic BMPCC 4K and 6K Aluminum Alloy Rig Stabilizer with 1/4” & 3/8” Threads Cold Shoe and NATO Rail for Vlogging Photography Filmmaking - VS103

  • 【Compact Camera Cage】 Note: Not compatible with BMPCC 6K Pro. This aluminum alloy camera cage is a simple yet versatile platform for you to add....
  • 【Multiple Mounting Options】 With NATO accessory rail, dual cold shoe mounts, strap slots, multiple 1/4”-20 and 3/8”-16 female threads, and....
  • 【Wide Compatibility】 The hex key magnetically attached to the bottom of the cage can tighten camera screws. The cage is also compatible with Ronin....
  • 【Secure Mounting】 Built-in top and bottom 1/4”-20 screw with dual locating pins securely attaches your Blackmagic Pocket Cinema Camera 4K/6K in....
  • 【Solid Construction】 Made of CNC-milled aluminum alloy with a black anodized finish, the camera cage is durable and wear-resistant. It also gives....
Check Stock

Supfoto V Mount Battery Plate for BMPCC 4K/6K 15mm Rod Mount V Lock Plate BMPCC Power Supply with D-Tap & USB Output 5.5 x 2.5mm DC Power Cable for BMPCC 6K/4K

  • Power your BMPCC 4K/6K and accessories with this V-mount Battery Plate. Power your BMPCC 6K/4K and accessories using a separately available V-mount battery..
  • The BMPCC 4K/6K V lock battery plate features a 15 VDC D-Tap output, an 8 VDC barrel output, a 12 VDC barrel outputs, a 5 VDC barrel outputs, a D-Tap output and two USB port. A power switch is provided on the side to turn everything on or off..
  • It also features a 15mm rod clamp that mounts onto standard 15mm LWS rods.This rod bracket system gives the user the flexibility to mount the plate in a variety of different mounting setups..
  • This DC Male 5.5 x 2.5mm BMPCC 6K/4K Power Adapter Cable enables you to power your Blackmagic Cinema Camera 6K or 4K using an external v mount battery with a 5.5 x 2.5mm barrel port..
  • Smart and wide applications power output systems. With the help of the battery plate Power up monitors, mobile phone, led lights, on camera flash, etc..
Check Stock

Power Junkie by Blind Spot - Multi use NPF Battery Plate for filmmakers Using NP-F Batteries - Mirrorless or BMPCC Power - It s Also a npf Charger - Battery Plate with Industry Mount.

  • Power most DSLR/Mirrorless camera rigs plus BMPCC 4K / BMPCC 6K: Filmmaking is tough on your batteries, with the Power Junkie use Sony NP-F batteries....
  • Use three ports simultaneously: A 2.5mm DC port and 2x USB-A. Power your camera, a film light and another accessory all at the same time up to 28W.....
  • Charge and Sony NP-F battery: Input power for charging via USB C or USB Micro. USB power is available everywhere from your phone charger to your car....
  • Industry mounting: Using a 1/4" it can be mounted to any cage, a cold shoe also gives you the flexibility of mounting and un-mounting quickly. A zip....
  • LED power indicator: Have full visibility of your battery. Monitor how much power is left, when charging it also monitors how full the battery is..
Check Stock

Prettyia Battery Adapter Mounting Plate Base for BMPC BMCC BMPCC for Sony NP-F970 F750 F550 Battery with DC Cables

  • . There is a 1/4 threaded hole at bottom for rig attaching, and a stick for tripod connection..
  • . It helps to support 12V DC power input and extend battery life. This Adapter offers red led indicator to show power on..
  • . DV Battery Plate Adapter for BMPCC/BMCC/BMPC is a battery adapter which fits securely on the back of F970/F750/F550 battery on the rear of the....
  • . Compatible with: camera for BMPCC / BMCC 2.5K / BMPC 4K (F970/F750/F550 Battery).
  • . It gives users the ability to converting voltage to 12v easily and attaches camera battery normally used with camera for BMPCC/BMCC 2.5K/BMPC 4K..
Check Stock

SMALLRIG Lightweight Top Plate for BMPCC 4K & 6K - APT2510

  • 【FOR BMPCC 4K & 6K】SMALLRIG APT2510 is designed to mountarious accessories such as a monitor or top handle on your Blackmagic Design Pocket Cinema....
  • 【ANTI-TWIST】The multifunctional top plate for BMPCC 4K & 6K firmly mounts to the camera using a 1/4”-20 screw and features an anti-twist....
  • 【MOUNTING POINTS】The plate features a variety of mounting options including 1/4”-20 and 3/8”-16 holes, two locating holes for ARRI standard,....
  • 【SINGLE 15MM ROD CLAMP】The included 15mm rod clamp is detachable and can mount on several selected places, so you can use a seperately available....
  • 【BUILT IN NATO RAIL & COLD SHOE】The plate also includes a built-in NATO rail, two integrated shoe mounts for additional mounting options. An Allen....
Check Stock

MEKNIC Camera Base Plate with Dual 15mm Rod Rail Clamp for Suitable for All Kinds of Rabbit cage and DSLR Rig Support System with Tripod Mounting Baseplate (Premium)

  • ... allows to attachment of 15mm rods, then lens supports, matte box, follow focus, etc..
  • ✅【Camera Rig Mounting】:The MEKNIC baseplate camera clamp features standard 1/4"-20 & 3/8"-16 screw for connection of any cameras (such as for Sony A6300 A6500 A7SIII, BMPCC 4K & 6K).It provides 1/4'' and 3/8'' holes on the bottom for quick mounting a cage onto a tripod or any other plates..
  • ✅【DSLR Shoulder Rig Widely Applications】:It could be used to mount camera, cage and tripod. To access the baseplate attached to the camera, cage or tripod, you need to remove the second plate..
  • ✅【MEKNIC Camera Base Plate stand Stable Design】: Connecting pipes through four holes, this product is stronger than other products (which connects with three holes).
  • This product is made of a piece of aluminum alloy, which is more durable than other designs..
  • ✅【Rubber Cushions】: There are rubber cushions on the base plate, which increases friction for cameras to prevent the twisting. Also, the rubber cushions can protect the camera be scratched with this MEKN....
Check Stock

Coiled D-Tap to BMPCC 4K Power Cable P Tap 2-Pin Power Cable for Blackmagic Pocket Cinema Camera 4K 6K & Gold Mount V Mount Battery

  • The Coiled D-Tap to BMPCC 4K Power Cable allows you to power your BMPCC 4K / 6Kfrom brick batteries and other D-Tap sources..
  • Measuring about 18' long coiled and 40" fully extended, it lets you keep a neater rig..
  • Plug A: 2 pin female. Plug B: Standard male D-Tap..
  • There is a key on the 2 pin connector, please match the key to plug in, please don't insert the 2 pin plug or d-tap connector inversely..
  • The 2 pin connector will automatically lock when you plug it in.It is impossible to pop off.But you can easily pull it out..
Check Stock

Neewer D-Tap to BMPCC 4K/6K Coiled Power Cable Compatible with Blackmagic Pocket Cinema Camera 4K/6K Gold Mount V Mount Battery Weipu 2 Pin Female to P Tap, 16 inches - 50 inches Length

  • The D-Tap to BMPCC 4K/6K Weipu power cable is specifically compatible with Blackmagic Pocket Cinema Camera 4K/6K.
  • Connector Type: Connector 1: D-Tap. Connector 2: BMPCC 4K/6K Weipu SF6 2 Pin Female Plug.
  • Also fit for those using any V-mount or Gold mount battery with a D-tap plug.
  • Coiled cable for a flexible reach and neat setup. The cable length can stretch from 16 inches to 50 inches, allows your camera to connect the power more freely.
  • Every cable was tested to ensure that there is no short circuit, no potential breakdown problems before shipping. There is a key on the 2 pin connector, please match the key to plug in, please don't insert the 2 pin plug or d-tap connector inversely.
Check Stock