Choosing Christmas (Christmas Holiday Extravaganza)

  • 【PCV CCV Exhaust Hose For BMW Replacement】Since the whole point of positive crankcase ventilation is to keep these gases out of the crankcase, the PCV valve is designed to close off when this happens and block the back flow of gases. If the PCV valve hose is broken, the gas will not be transferred back into the engine, which will reduce your engine efficiency, increase harmful gas emissions and the probability of engine failure..
  • 【Fit The Following Vehicles】This E46 PCV Valve hose kit is a direct replacement for the original vent hoses and PCV valves on a variety of vehicles. This includes most 3 series and 5 series models from 1997-2005. SEE THE FULL LIST ON THE PRODUCT DESCRIPTION PAGE BELOW..
  • 【Replace Part Numbers】This X3 X5 CCV hose kit can replace 11617504536 / 11617501566 / 11611432559 / 11157532649 which are commonly found on popular BMW model including BMW E46 3 series E39 E60 X3 X5..
  • 【OEM Quality & Direct Fit】Manufactured with high temperature plastic materials & advanced technology, meets OEM standard. Even though this is not a genuine BMW PCV crankcase ventilation oil separator hose, but it works even better and lasts longer. Save your time and fund by replacing the PCV crankcase ventilation oil separator hose yourself..
Check Stock

MOSTPLUS 2 Camshaft 1 Crankshaft Position Sensor Compatible for BMW E46 3-Series 12147539165 + 12141438082 + 12141709616

  • Fitment: Compatible for 2001-2005 BMW 320I, Compatible for 2000 BMW 323CI, Compatible for 1999-2000 BMW 323I, Compatible for 2001-2005 BMW 325CI,....
  • OEM Part Number: 12147539165 + 12141438082 + 12141709616 (Please check your car information before purchase).
  • The key parts including chip from top supplier.
  • Part Specifications: Camshaft with wire--Connector Gender:Female,Terminal Gender:Male,Terminal Type:Blade,Terminal Quantity:3.
  • Package includes: 2 Engine Camshaft Position Sensor(Engine Intake Side with Wire & Exhaust side without Wire) + 1 Crankshaft Position Sensor.
Check Stock

BTSHUB Exhaust Hanger Removal Pliers Rubber Grommets Removal Tool Muffler Rubber Hanger Pliers

  • Used for separating rubber supports from exhaust hanger brackets (i.e. tailpipe, exhaust piper and muffler) with 25 degree offset handles for work in hard to reach areas..
  • The exhaust pliers works on most import and domestic car and truck exhaust systems that use the rubber hanger supports.
  • Compatible with Mercedes Benz, BMW, Audi, VW, Mini Cooper, Porsche vehicles.
  • Features slip-resistant comfort grips, squeeze to remove a rubber support from an exhaust hanger..
  • Made of high carbon steel material provide maximum strength, durability, and leverage.
  • 8 inch (2.1cm) opening fits around metal hanger brackets and against rubber hanger grommet.
Check Stock

8MILELAKE Exhaust Pipe Hanger Remover Pliers Compatible for VW Porsche BMW Mercedes Mini Cooper Audi

  • The 8MILELAKE exhaust hanger removal pliers is used to remove rubber exhaust system hangers (i.e. tailpipe, exhaust piper and muffler), with 25 degree offset handles for work in hard to reach areas..
  • The exhaust pliers works on most import and domestic car and truck exhaust systems that use the rubber hanger supports, like fit for Mercedes Benz, BMW, Audi, VW, Mini Cooper, Porsche vehicles.
  • Simply squeeze the pliers slip-resistant handles to force the bracket from the rubber support.
  • The exhaust hanger removal plier is made of high carbon steel, which has strong hardness and durability.
  • Comfortable soft vinyl grips with anti-slip function, easy to use and save efforts.
Check Stock

Crankcase Ventilation Valve Oil Separator Hose Compatible with BMW E46 E60 E39 X3 X5 320i, 323i, 325, 325i 328i, 330i, 525i, 528i CCV PCV Valve Ventilation Separator 5 Piece Value Kit 11611432559

  • 【PCV CCV Exhaust Hose For BMW Replacement】Since the whole point of positive crankcase ventilation is to keep these gases out of the crankcase, the PCV valve is designed to close off when this happens and block the back flow of gases. If the PCV valve hose is broken, the gas will not be transferred back into the engine, which will reduce your engine efficiency, increase harmful gas emissions and the probability of engine failure..
  • 【Fit The Following Vehicles】This E46 PCV Valve hose kit is a direct replacement for the original vent hoses and PCV valves on a variety of vehicles. This includes most 3 series and 5 series models from 1997-2005. SEE THE FULL LIST ON THE PRODUCT DESCRIPTION PAGE BELOW..
  • 【Replace Part Numbers】This X3 X5 CCV hose kit can replace 11617504536 / 11617501566 / 11611432559 / 11157532649 which are commonly found on popular BMW model including BMW E46 3 series E39 E60 X3 X5..
  • 【OEM Quality & Direct Fit】Manufactured with high temperature plastic materials & advanced technology, meets OEM standard. Even though this is not a genuine BMW PCV crankcase ventilation oil separator hose, but it works even better and lasts longer. Save your time and fund by replacing the PCV crankcase ventilation oil separator hose yourself..
Check Stock

12 pcs Exhaust Manifold Nuts Head Stud Nut M8 Hex Copper Self Locking Fit for BMW E30 3 Series

Check Stock

Linekong Motorcycle Slip On Exhaust Muffler Universal 1.5-2 Inlet Exhaust Pipe With Removable DB Killer For Pit Dirt Bike Scooter ATV Racing Street Bike Kawasaki Honda BMW Yamaha Suzuki

  • It Is Universal Motorcycle Exhaust Muffler Can Be Used For GY6 ATV Scooter Dirt Bike Pit Bike Street Bike Ninja 300 400 Yamaha R3 BMW DUCATI HONDA....
  • 100% Brand New, Never Mounted.Comes with a stainless steel welding adaptor allow to fit pipe 38mm - 51mm.Removable DB Killer reduce the noise,give a....
  • The motorcycle exhaust muffle is made of stainless steel with frosted surface,durable for long time use..
  • It's a good upgraded exhaust / muffler to increase the power performance for the motorcycle.
Check Stock

FLBETYY 38-51mm Universal Black Motorcycle Dual-outlet Exhaust Tail Pipe Muffler Fits Yamaha YZF-R6 Kawasaki Z1000 Suzuki GSX-R

  • 【HIGH QUALITY】: Made of high quality stainless steel, durable, corrosion resistant, rust proof..
  • 【SOUND】: Sounds amazing, nice growl, loud without being too annoying.
  • 【STYLISH DESIGN】: Designed to push exhaust gases downwards away from vehicle..
  • 【APPLICATION】: Suitable for most motorcycles with a diameter of 51mm / 2 inches, such as for Yamaha YZF-R6 / for Suzuki GSX-R GSX-S1000 / for BMW....
  • 【DUAL-AIR-OUT】: The motorcycle muffler tailpipe with dual-outlet exhaust pipe design, reducing overall weight for top performance to obtain max....
Check Stock

Gazoz Performance 5 in 1 Digital Meter Gauge - Smart OBD2 Device - Boost, EGT, Voltage, Intake, and Water Temperature. PNP Meter Lite for BMW Mini Cars.

  • ...ONE OBD2 GAUGES: Looking for a sleek, simple way to monitor your BMW Mini's condition and performance? Look no further than the Gazoz Performance Digital Meter Gauge! This handy device plugs into your car's OBD2 port and is ready to go in just seconds. It'll give you 5 readings at a time: boost, intake temperature, exhaust gas temperature, volt, and water temperature..
  • SMART OBD2 GAUGE: This Digital Car Meter provides you with 5 real-time statistics in one easy-to-read device. The device has 5 modes, Boost Mode, Exhaust Temperature Mode, Intake Temp. Mode, Water Temp. Mode, Volt Mode. Simply plug the OBD2 device into your car and get the information you need instantly..
  • PLUG AND PLAY INSTALLATION: The Smart OBD gauge plugs into your car's OBD2 port and gives you immediate, easy-to-understand readings. It provides a Live Data Stream that can help you accurately identify the cause of your CHECK ENGINE LIGHT with a simple glance. When it comes time for maintenance or troubleshooting, simply plug in the device and instantly get the information you need..
  • SLEEK AND STYLISH: Our LED OBD2 Meter for BMW Minis is designed to be a sleek addition to your center console. Our Digital Gauge Meter is not only made with high-quality materials but also seamlessly blends....
Check Stock

TRW Pro TRH0919 Disc Brake Pad Set For BMW X5 2007-2018, Rear, And Other Applications

  • Fits right, the first time, with all pads slotted and chamfered according to OE specifications.
  • Copper Free for less impact on the environment.
  • For confirmed fitment of this TRW Pro Disc Brake Pad Set please verify your vehicle with the Check Fit option above.
  • Fits: BMW 1 Series M: 2011, BMW 535i: 2008 - 2010, BMW 535i GT: 2010 - 2017, BMW 535i GT xDrive: 2011 - 2017, BMW 545i: 2004 - 2005, BMW 550i: 2006 - 2010, BMW 550i GT: 2010 - 2015, BMW 550i GT xDrive: 2010 - 2017, BMW 645Ci: 2004 - 2005, BMW 650i: 2006 - 2010, BMW 740Ld xDrive: 2015, BMW 740Li: 2011 - 2015, BMW 740Li xDrive: 2013 - 2015, BMW 740i: 2011 - 2015, BMW 745Li: 2002 - 2005, BMW 745i: 2002 - 2005, BMW 750Li: 2006 - 2015, BMW 750Li xDrive: 2010 - 2015, BMW 750i: 2006 - 2015, BMW 750i xDrive: 2010 - 2015, BMW 760Li: 2003 - 2008, 2010 - 2015, BMW 760i: 2004 - 2006, BMW ActiveHybrid 7: 2013 - 2015, BMW Alpina B7: 2007 - 2008, 2011 – 2015 and more.
Check Stock

X AUTOHAUX 1 Set Black Valve Cover Gasket Seal 11129070990/11120030496/56002000 for BMW E46 E39

  • OE Number:11129070990/11120030496/56002000.
  • for BMW 530i 2001-2002, for BMW 328i 1999-2000, for BMW Z3 1998-2002, for BMW 325Ci 2001-2002, for BMW 325xi 2001-2002, for BMW 325i 2001-2002, for BMW 330Ci 2001-2002, for BMW X5 2001-2002, for BMW 528i 1999-2000, for BMW 330i 2001-2002, for BMW 323i 1999-2000, for BMW 525i 2001-2002, for BMW 330xi 2001-2002, for BMW 323Ci 2000, for BMW 328Ci 2000.
  • Good sealing performance, long service life and long durability..
  • Direct replacement for a proper fit and easy installation..
  • Good oil resistance, heat resistance, abrasion resistance and solvent resistance..
Check Stock

MOSTPLUS 11127570292 Engine Valve Cover Compatible with BMW 2011-2014 X3 X5 X6 335i 535i 2013-2014 740i 2012-2014 640i 2011-2013 135i

  • Fitment(1): Compatible with 2012-2018 BMW 640i, Compatible with 2016-2018 BMW M2, Compatible with 2011-2018 BMW X5, Compatible with 2010-2017 BMW 535i GT, Compatible with 2011-2017 BMW 535i GT xDrive/X3/X6, Compatible with 2013-2017 BMW 640i Gran Coupe, Compatible with 2014-2017 BMW 640i xDrive/640i xDrive Gran Coupe, Compatible with 2014-2016 BMW 335i GT xDrive/435i/435i xDrive/M235i, Compatible with 2015-2016 BMW 435i Gran Coupe/M235i xDrive/X4.
  • Fitment(2): Compatible with 2009-2016 BMW 535i, Compatible with 2011-2016 BMW 535i xDrive, Compatible with 2012-2016 BMW ActiveHybrid 5, Compatible with 2013-2016 BMW M135i, Compatible with 2011-2015 BMW 335i/335i xDrive, Compatible with 2012-2015 BMW 740i/740Li, Compatible with 2013-2015 BMW 740Li xDrive/ActiveHybrid 3/ActiveHybrid 7/X1, Compatible with 2010-2013 BMW 135i, Compatible with 2013 BMW 135is.
  • Replaces OE Part #:11127570292, 264937, E346-AS.
  • Package Includes: 1 Valve Cover Gasket Set.
  • Please contact us if you have any problem.
  • Instruction is not included. Professional installation is recommended.
Check Stock

HPS Performance Polish intercooler intake charge pipe n55 17-127P

  • Fits 2011-2016 BMW 535i / 2011-2016 BMW 535i xDrive / 2011-2017 BMW 535i GT / 2011-2017 BMW 535i GT xDrive / 2011-2019 BMW x6 / 2012-2018 BMW 640i / 2014-2018 BMW 640i xDrive / 2013-2019 BMW 640i gran coupe / 2014-2019 BMW 640i xDrive gran coupe / 2011-2018 BMW x5 / 2013-2015 BMW 740i / 2013-2015 BMW 740Li / 2013-2015 BMW 740Li xDrive / 2012-2016 BMW activhybrid 5 / 2013-2015 BMW activhybrid 7.
  • Simple but effective performance upgrade replacing stock plastic piping. Increase +5 Whp horsepower, +5 Ft/lbs torque. Reduce turbo lag and improve throttle response..
  • Light weight mandrel-bent aluminum alloy piping replaces the OEM stock restrictive plastic tube. Bead rolled pipe ends prevent couplers from popping off under boost..
  • The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. Bolt-on easy installation..
  • Backed by HPS Performance Products lifetime limited warranty. NOT CARB Compliant.
Check Stock