Categories

Best Board Connectors

TDNVF - PSU 320W Switching AcBel AC320EM-00 Precision Workstation T1600 Tower

  • External Connectors: 1 x RJ45 Gigabit Ethernet Connector, 2 x PS2 Connectors, 1 x Serial Connector, 1 x Display Port, 1 x VGA Connector, 2 x Audio Ports, 6 x USB 2.0 Connectors.
Check Stock

Seeed Studio LoRa-E5 Development Kit - Based on LoRa-E5 STM32WLE5JC, LoRaWAN Protocol and Worldwide Frequency Supported.

  • ✨【Full GPIOs Led Out to Rich Interfaces】LoRa-E5 Dev Board also has rich interfaces, including RS-485, Grove, and etc. Developed to unlock the full functionality of the LoRa-E5 module, LoRa-E5 Mini Dev Board has led out full 28 pins of LoRa-E5 and provides with rich interfaces including Grove connectors, RS-485 terminal, male/female pin headers for you to connect sensors and modules with different connectors and data protocols, saving your time on wire soldering..
  • ✨【Long-distance Transmission Range to 10km】LoRa-E5 Mini Dev Board features an ultra-long transmitting range of LoRa-E5 up to 10km in an open area, extremely low chip power consumption, and user-friendly interfaces. Note: Ideal value in open area..
  • ✨【Global LoRaWAN and LoRa Frequency Plan Supported】LoRa-E5 Mini Dev Board embedded with LoRa-E5 STM32WLE5JC Module, which is the world-first combo of LoRa RF and MCU chip into one single tiny chip and is FCC and CE certified. It is powered by ARM Cortex-M4 core and Semtech SX126X LoRa chip, supports both LoRaWAN and LoRa protocol on the worldwide frequency..
Check Stock

Pieces 4 Pin LED Light Strip Connectors Set Including Screw Fixing Clips, 4 Pin LED Connectors, Cuttable T, L and X Shape PCB Board for SMD 5050 RGB LED Strip Lights Gapless Solderless Connector

  • Working condition: these LED light strip connectors are able to stand up to 4A current and 0 - 24V (5V, 12V, 24V) voltage, the heat resistance level is -20℃ - 100℃, so they are suitable for most non-waterproof 4 pin SMD 5050 RGB lights in 0.39 inch/ 10 mm width.
  • Note: you should pay attention to use them correctly for ensuring safety and extending service life.
  • Cuttable PCB board: the PCB board is cuttable, so you can use a cutting tool to cut T-shaped, L-shaped and X-shaped PCB board into any shape you want to facilitate the connection of various forms of light strips.
  • Just use your imagination to DIY a special light strip.
  • Please cut the LED strip according to the cuttable mark when you want to change the shape of PCB board.
  • Simple to install: the LED strip connector clip can be easily opened and closed, you can quickly slide RGB strip into the connector clip without any tool, please make sure connector + - polarity in line with + of strip before you connect it.
  • Wide range of usages: the 5050 LED strip connectors are suitable for standard density strips or DIY LED lights, for corner connection, and able to decorate Christmas trees, parties, birthdays, weddings, parties and other scenes according to your own needs.
Check Stock

ONERAY 2PCS 70inch IP68 LED Running Board Light Truck Side Marker White & Amber Turn Signal Flexible Step Strip Lights Combo Kit for Trucks Pickup SUV

  • 【2PCS-70"Board Running LED Light】: Our Board Running LED Light have 174 super bright LEDs with 2835-SMD (87 Amber LEDs and 87 White LEDs), we use additional ground wire inline fuses to make it more safer..
  • 【Waterproof rate】: IP68 rated, waterproof, dustproof, anti-corruption for harsh environment, durable and flexible with up to 30,000 hrs lifetime..
  • 【Fitment】: Recommended for Extended Cab & Crew Cab Trucks. Install simpler, drive safer, look particular, wonderful upgrade experience..
  • 【Warranty】: 1-yr Limited Warranty &Free life-long Tech support. If you meet a problem with the lighting, please get in touch with us, our service team will help you in troubleshooting and claims..
  • 【Package Included】: 2 pcs 70inch Led Running Board Strip Light, 8 pcs 12inch zip ties, 10 set of cards & screws, 4 set T-Tap connectors, 6 pcs connectors, 1 Instructions.
Check Stock

ONERAY 2PCS 70inch IP68 LED Running Board Light Truck Side Marker SEQUENTIAL Amber Turn Signal Flexible Step Strip Lights Combo Kit for Trucks Pickup SUV

  • 【2PCS-70" Sequential Running Board Light】: Our Running Board Light have 120 super bright LEDs with 5050SMD, we use additional ground wire inline fuses to make it more safer..
  • 【Waterproof Rate】: IP68 rated, waterproof, dustproof, anti-corrosion for harsh environment, durable and flexible with up to 50,000 Hrs lifetime..
  • 【Fitment】: Recommended for Extended Cab & Crew Cab Trucks. Install simpler, drive safer, look particular, wonderful upgrade experience..
  • 【Package Included】: 2 pcs 70inch Sequential Running Board Strip Light, 8 pcs 12inch zip ties, 10 set of cards & screws, 4 set T-Tap connectors, 6 pcs connectors, 1 Instructions.
  • 【Warranty】: ONERAY 1-yr Limited Warranty & Free life-long Tech support. If you meet a problem with the lighting, please get in touch with us, our service team will help you in troubleshooting and claims..
  • 【Tips】:If the running lights are not allowed to be red in your local area, we don't recommend buying them, eg: MI.
Check Stock

Seismic Audio - SARLX-16x25 - 16 Channel XLR Snake Cable - 25 Feet Long - Pro Audio Snake for Live Live, Recording, Studios, and Gigs - Patch, Amp, Mixer, Audio Interface 25'

  • Contents: 6 Channel, 30' Compact XLR Sub Snake.
  • Application: Sending Microphone signals to Mixing board.
  • Connectors (Box): 6 XLR Female Connectors.
Check Stock

Genuine Dell Optiplex 980 Small Form Factor (SFF) System Motherboard Mainboard Systemboard, Compatible Part Number: C522T

  • Chipset: Intel Q57 Express chipset, Supported Processors: Quad-Core - Intel Core i7 series, Intel Core i5 series, Dual-Core - Intel Core i3 series, Intel Pentium, Socket Type - LGA1156.
  • Supported Memory: Type - DDR3 SDRAM (non-ECC memory only), Speed 1066 MHz or 1333 MHz, Connectors - four, Capacity - 1 GB, 2 GB, or 4 GB, Minimum memory - 1 GB, Maximum memory - 16 GB, Audio: integrated.
  • Video: Integrated Intel graphics media accelerator HD, Peripheral Interfaces: Back panel -two connectors for line-in/ microphone and line-out, Front panel - two front-panel connectors for headphones and microphone, eSATA - one 7-pin connector, Network -one RJ45 connector, Parallel -one 25-pin connector (bidirectional), Serial -one 9-pin connector.
  • 16550C-compatible, USB - Front panel - two connectors, USB - Back panel -six connectors, Video - one 15-hole VGA connector one 20-pin DisplayPort connector.
  • System Board Connections: one 120-pin connector PCI Express x16 data width (maximum), one 164-pin connector Express Lane, Serial ATA - three 7-pin connectors, Memory - four 240-pin connectors, Internal USB - one 10-pin connector (supports two USB ports), Processor fan - one 5-pin connector, Front I/O - one 26-pin connector, Front panel control - one 14-pin connector, Proces....
Check Stock

Yoico 2Pcs 6 Feet Professional Speakon to Speakon Cables Wire Speaker Audio Amplifier Cord 7mm with Twist Lock

  • ✪ NEUTRIK SPEAKON COMPATIBLE: This Speakon NL4FC Plug Kit Perfect for Neutrik Speakon NL4FC, NL4FX, NLT4X, NL2FC, NA4LJ, NA4LJX, NL4MP, NL4MPR....
  • ✪ EASY TO INSTALL: These speakon connectors include two inserts for either large or small diameter speaker cables. They are twist lock with a....
  • ✪ HIGH QUALITY:These NL4 Connectors are solid, high quality connectors that are extremely easy to install and function flawlessly.The plugs has PVC....
  • ✪ SQUARE SOCKET CONNECTOR: Well made jacks, using 1/4" TRS jacks were breaking the connectors that were soldered to the crossover board. Easy to....
  • ✪ NOTE: 1.Only works if your amplifier has this NL4 Speakon connector.
  • 2.These are for bare wire, 4 conductor cables and will not work with 1/4"....
Check Stock

BotBrain Robotics Control Board

  • Basic Stamp microprocessor, the board uses sensor inputs, a program, and servo outputs to operate a robot using the Parallax pBasic language.
  • Features include 8 sensor inputs and 5 servo outputs, all with polarized connectors as well as a built-in piezo "speaker".
  • Holes on side on the side of the board bolt to Merkur parts.
Check Stock

Swimables 42002-0007s Control Board Kit for Mastertemp & Max-E-Therm Pentair Pool and Spa Heater - Made in USA

  • Installation: Begin by removing the old circuit board by shutting down all power and opening the top of the heater to have access to the old board. Unplug the membrane pad from the board and remove the wire connectors connected to the old board..
  • Installation(2): Unscrew the 4 screws holding the board in place. This will allow you to take the old board completely out..
  • Installation(3): Screw the board back in and plug the membrane pad into the connection that accepts the ribbon cable. Reconnect all of the wire connections and close out your master temp or max e therm heater..
  • Compatibility: This board will work on the following models: Mastertemp 200, Mastertemp 250, Mastertemp 300, Mastertemp 400, SR200NA, SR333NA, SR400NA, SR200HD, SR333HD, SR400HD, 460805..
  • 100% Satisfaction Guaranteed: Buy with confidence, as our premium quality control boards are built to last, and if you're not satisfied with it at any time within 30 days of purchase, we'll provide a refund or replacement..
Check Stock

Favide 200 Pieces in Total Wooden Circles Wooden Heart Tags with Holes and 12 mm Rings for Birthday Boards Valentine Chore Boards Arts and Crafts Set 1

  • Dimension: diameter of each slice is 30 mm/ 1.2 inches and the thickness is 3 mm/ 0.12 inch, each slice has 2 holes with 3 mm/ 0.12 inch diameter....
  • Material: the slices are made of wood, they are lightweight and solid, key rings connectors are made of stainless steel, which is sturdy and can serve....
  • DIY your crafts: the surfaces of wooden slices are blank and smooth, allow you to paint or write whatever you want on them, each slice has 2 holes,....
  • Wide ranges of usage: suitable for making a family calendar, birthday board tags, crafting with kids, craft projects, classroom board, wedding gift....
  • Package includes: 200 pieces in total, include 50 pieces wooden circles and 50 pieces wooden heart tags, 100 pieces key rings connectors, 2 shapes can....
Check Stock

Dupont Connector Kit - 1004pcs Crimp Connector Kit with 2.54 mm Crimp Pin Connector Housings, Single Row Male Headers, Male/Female Crimp Pins and Ribbon Cable from Plusivo

  • Complete Dupont Connector Kit: This kit includes different types of connectors such as single row pin headers, bent pin headers, colored pin headers, crimp pin connector housings, and male & female crimp pins for wires..
  • Premium Quality Dupont Connectors: High-quality crimp pin connector housings made of durable plastic and metal tin plated pins with internal pure copper for increased conductivity..
  • More than 1000 Dupont Connectors and Crimp Pins: Create custom breadboard jumper wires and circuit board wire connections using the wide selection of parts included in this kit..
  • Durable Plastic Storage Box: All the items are packed inside a durable plastic box with adjustable compartments to organize all the components as desired, either by type or by size. Bring your kit anywhere and keep the dupont connectors free from damaging and breaking..
  • Satisfaction Guarantee: Our connector assortment box is backed by our manufacturer 30-day money back guarantee.
Check Stock

MaticBox Case for Raspberry Pi 3 / Pi 2 / Tinker Board – Low Profile, Stackable, Universally Mountable DIN Rail, Automation Friendly, Fan Support (Black)

  • Featured here is a single case that can be configured for different applications. It is compatible with Raspberry Pi 2 Model B, Pi 3 Model B, Pi 3 Model B+, Asus Tinker Board (NOT compatible with Raspberry Pi 4). This is just a case, Raspberry Pi / Tinkers Board is NOT INCLUDED.
  • Can be mounted to flat surfaces, DIN rails, or to any object via zip ties.
  • Cases can be stacked to form clusters of single board computers.
  • Supports 25*25mm fans from 5mm to 10mm tall. Fans can be attached directly into the case body, or using the provided fan adapter (FAN NOT INCLUDED).
  • Comes with two covers – Low Profile cover when hosting just the single board computer and Automation cover for extra space when hosting extension boards with larger relays, terminals and connectors.
Check Stock