Best Board Mount Audio Amplifier
DC12V-24V 2.1 Channel TPA3116 Subwoofer Amplifier Board High Power Bluetooth Audio Amplifier Board 50W+50W+100W (Bluetooth Amp),Bluetooth Amp
- tpa3116 amplifier 100W Subwoofer Amplifier Board.
- Frequency response range: input: 20 hz - 20 KHZ, output: 20 hz - 180 hz.
- tpa3116 2x50w amplifier board Operating voltage range: DC 12-24V(maximum voltage is no more than 24V).
- This is a pre-amplifier, bass frequency processing, with bass volume potentiometer control of the bass amplifier board..
- bluetooth amplifer board DC 12-24V power supply, wide operating voltage, power-saving design, more than 90% power efficiency. Maximum support 100W (Bass) bass channel output.
- Speaker impedance: bass speaker impedance: 2-8 ohm.
- You can use a good switching power supply adapter, laptop switching power supply, Here is our 24V power diy amplifier.
Check StockXY-S100H 2.1 Channel Bluetooth Power Amplifier Board with APP Control, TPA3116 Chip 50W×2+100W, 12V-24V Audio Power Amplifier Module, Support Setting Bluetooth Name and Password
- 【What chip does this power amplifier board use? ] This power amplifier board adopts two TPA3116D2 chips, wide voltage input DC: 12-24V, and the output power amplifier peak value can reach 50W*2+100W (PMPO)..
- 【How many input modes?】 This power amplifier board has three input modes, USB mode (USB flash memory mode and USB sound card mode), Bluetooth mode, and AUX mode. The priority of the input mode is the hardware priority principle. You can also switch its audio input source at any time through the APP..
- 【Treble and Bass Controls!】 If you are tired of the inherent treble and bass, why not try the treble and bass control knobs! No matter what, you can always create the sound you like..
- 【Additional Features!】In order to explore the maximum potential of this power amplifier board, we have developed an APP for this power amplifier board. You can adjust the sound effect of the power amplifier board through the APP, set the Bluetooth name and password of the power amplifier board, and even set whether a prompt sound is required, etc..
- 【7 * 24 Hours After-sales Service!】Paying Attention To Customer Experience And Satisfying Customers Is Our Service Tenet. If You Have Any Questions About The Product, or The Product Has Quality Problems,....
Check StockYaeCCC 1000W Car Audio High Power Amplifier Amp Board Powerful Bass Sub woofer Board 12V
- 1000W Mono Car Audio High Power Amplifier Amp Board..
- Strong heat dissipation power drawing technology is compact..
- High efficiency, wide frequency, high tone quality..
- 12V 1000W car audio amplifier board provide a wonderful in-car entertainment..
- With current , overload and short circuit protection..
Check StockAudio Amplifier Board, DROK 5W+5W Mini Amplifier Board PAM8406 DC 5V Digital Stereo Power Amp 2.0 Dual Channel Class D Amplify Module for Speaker Sound System DIY
- Parameters: DROK audio amplifier board working voltage is DC 5V, output power is 5W (2Ω 5V)/3W (4Ω 5V) / 1.8W (8Ω 5V). Input method is monaural input..
- Artificial Material: this New-designed mini power amplifier is made of noble black immersion gold circuit board, imported KEMET speaker capacitor, large-capacity filter capacitor for channels. Besides, we customized black copper terminal blocks and gold-plated audio input terminal blocks for this new amplifier module..
- High Performance: the digital amplifier module is with high efficiency of over 90%, general harmonic distortion noise is less than 10%, low quiescent current and noise suppression..
- Safe Protection: the class D dual-channel amp board is designed with input reverse connection protection, short circuit protection, over heat protection.
- Additional Function: it is available to connect amplifier type to choose different function (MODE: high electricity level is Type D, low electricity level is Type AB. Factory defaults high electricity level).
Check StockDiitao 50W×2+100W Bluetooth Power Amplifier Board with Subwoofer 2.1 Channel, 12V-24V Audio Power Amplifier Module with Treble and Bass Control for DIY Bluetooth Audio ZK-MT21, Black
- 【ZK-MT21 Power Amplifier Board】Uses Bluetooth 5.0, and its transmission distance can reach 49 feet (without obstruction). At the same time, this power amplifier board has a 3.5mm AUX audio input interface..
- 【Specification】With 36*25*10mm heat sink, suitable for power supply DC12-24V/5A or above (24V battery pack cannot be connected), suitable for speakers 20~100W, 4~8Ω..
- 【Protection Function】ZK-MT21 Bluetooth power amplifier board has multiple protection mechanisms to ensure its safe operation. It has short-circuit protection, over-current, over-heat, and anti-reverse protection..
- 【Come With DC Conversion Plug】The DC adapters on the market (plug specification 5.5mm*2.1mm) basically can meet the needs of the ZK-MT21 Bluetooth power amplifier board. If your existing DC power plug is not 5.5mm*2.1mm, there is no The problem is because we have included a DC conversion plug in the product..
- 【Tips】There will be enough output power only when the audio input is sufficient and the power supply voltage/current is sufficient.The higher the power supply voltage, the greate....
Check StockHifonics ZD-750.4D Zeus Delta 700 Watt Four Channel Amplifier
- CLASS D AMPLIFIER - Class D topology ensures high efficiency with big power and a small footprint. This amplifier was built for driving systems, maintaining the highest sound quality sound for your car audio..
- BRIDGEABLE - Full range, four channel amplifier with flexible installation allows this amp to run in four channel or bridged mono mode, giving you the options you need to maximize the output of your car audio..
- BUILT FOR POWERFUL SOUND - Minimize heat generation with the PWM MOSFET power supply providing stability through the PC board. Old school Hifonics aluminum heat sink maintains superior heat dissipation to keep your car audio sounding smooth..
- CONTROL YOUR AUDIO - Control of amplifier output with onboard electronic crossover to tailor specific frequencies to speakers and subs. LED system protection allows you to monitor overload and speaker shortages with illuminated indicators..
- HIGH QUALITY CONNECTIONS - Secure molded connection terminal for all power, ground and speaker connections. Angled for ease of access while creating a clean wire management profile, to keep you....
Check StockArdest Tiny DC 5V 2-Channel 3W+3W USB Power Audio Amplifier Digital Amp Module Stereo Amplifier Board w/Potentiometer Volume Control for Raspberry Car Motorcycle,Speaker Headphones
- This is a great little audio amplifier. Mini size but super big power and amazing sound/fidelity.Well built and has all the connections conveniently....
- Mini Power Amplifier Board is impressive for its sound quality and flexible power supply.You can easily power it from a USB port on a laptop or 5v....
- The amplifier baord comes assembled.Pretty straight forward connecting wires as the board is labeled.
- Small compact audio amplifier keep the prototype size manageable, while the potentiometer allowing good level adjustment for needed volume and control....
- Raspberry Pi friendly 5volts with analog volume pot and on/off switch.You could combine the amp with a DAC and Rpi to build a small set of powered....
Check StockAudioPipe APMN-4200D 4 Channel 3000 Watt Max Power MOSFET Class D Car Audio Stereo Amplifier with Inline Fuse and Bass Knob Black
- CAR AUDIO AMPLIFIER: Class D car audio amplifier featuring 3000 watts of maximum power.
- RMS POWER: RMS Power: 4 x 182 watts at 4 ohms, 4 x 242 watts at 2 ohms.
- POWERFUL AUDIO: Built on mini chassis for powerful audio in tight spaces.
- INTERNAL COMPONENTS: Features a double side printed circuit board.
- AMPLIFIER SPECIFICATIONS: Maximum power output: 2 x 420 watts.
Check StockDC Audio LVL3-M2 12' Level 3 900W/1800W Dual-2-Ohm Car Audio Subwoofer/Sub
- Parameters: DROK audio amplifier board working voltage is DC 8-26V, can be powered by 12V, 24V.
- output power is 15W stereo (24V 8ohm)/ 10W stereo (12V 8 ohm), if connect 4 ohm or 2 ohm speaker, the power will be automatically limited to 15W..
- Artificial Material: this New-designed stereo amplifier module is made of noble black immersion gold circuit board, PAM8620 chip, imported KEMET speaker capacitor, large-capacity filter capacitor for channels. Besides, we customized black copper terminal blocks and gold-plated audio input terminal blocks for this new amplifier module..
- High Performance: the class D power amp module is with high efficiency of over 90%, general harmonic distortion noise is less than 0.2%, low quiescent current and noise suppression..
- Safe Protection: the 2 channel amp board is designed with input reverse connection protection, short circuit protection, over heat protection, overcurrent protection, overvoltage protection, undervoltage protection.
- Additional Function: it is available to connect external mute function (MUTE: High level mute, factory default low level).
- available to add an external Shutdown (SD: the chip will be Shutdown at low electricity level, factory defaults high electricity leve....
Check StockFX AUDIO GE5654 Tube Preamplifier for Home Audio HiFi Stereo Vacuum Buffer Tube Preamp with Bass and Treble Control with RCA Input/Output 12V/1A Power Supply(Black)
- ♪ HIGH QUALITY MATERIALS—The chassis of the preamplifier is made of a solid aluminum alloy material, and uses accurate and stable integrated circuits and high-quality components to eliminate low-frequency noise and ensure clear sound quality.
- The material of its PCB board is made of FR-4 insulation board and black immersion gold Craft, which has the characteristics of stable signal, high temperature resistance, long service life, and not easy to be oxidized..
- ♪ EXQUISITE APPEARANCE DESIGN—FX AUDIO pre-amplifier has a mini exquisite appearance and light weight, easy to carry around, its brushed texture surface and high-quality tube combine to appear more fashionable,elegant and Classical..
- ♪ SEPARATE CONTROL OF BASS&TREBLE—The vacuum tube preamplifier can independently adjust the bass and the specific proportion components in high-frequency sound to perfectly achieve HiFi effects. At the same time it can maximize the rendering of an atmosphere like being in a music performance to satisfy your experience of different sound styles in pursuit sound quality..
- ♪ RCA INPUT & OUTPUT—From RCA output ,the preamp can also be directly connected to the audio source and active multimedia audio equipment or indirectly connected to passive audio through....
Check StockMP3 USB Flash Drive Micro SD TF Card Player Lossless Decoder Amplifier Board Module by Envistia Mall
- Use this DIY MP3 player/audio decoder module to build your own MP3 player, Boom Box or portable audio player..
- Connect directly to headphones, or pair the stereo output of this player with an audio amplifier board to power your speakers..
- Plays MP3 audio files on a TF (MicroSD) card (the memory card used in cell phones), or a USB drive in U disk playback mode..
- 3.5mm headphone jack to connect headphones or to an external stereo amplifier. Onboard 2W mono amplifier to directly connect a speaker (single channel....
- Can be powered with standard 5V USB power (a USB power supply or power bank) through the Micro USB power connector. Can also be powered by a 3.7V to....
Check StockLANZAR Motorcycle Waterproof Speaker Amplifier System Set of 3 Inch 700W Weatherproof Speakers, AUX in - Handlebar Mount Mini Stereo - for ATV,Motorbike OPTIMC90 Black, 16.00in. x 10.00in. x 5.00in.
- AMPLIFY YOUR RIDE: The Lanzar 700-watt Motorcycle Amplifier and Speaker System is what you need to listen to high quality audio on your motor bike, ATV, or snowmobile! Includes (2) 3'' motorcycle speakers and a mini amp, great sound system on the go.
- WEATHERPROOF MATERIAL: Its marine grade construction resists effects of bad weather or rain. It also features a unique bullet design of the two included speakers. These speakers are finished in chrome for a look that will complement your vehicle.
- SUPPORTS VARIOUS DEVICES: The 4 channel amplifier base unit lets you connect MP3, CD player, iPod, iPhone, Smart phone, tablet to the 3.5mm AUX IN and enjoy your favorite music without the need for SD cards or USB drives.
- CHARGE YOUR PHONE: Never worry about empty phone batteries as the ATV amplifier system provides a USB charger port for the users to conveniently charge their phones and other devices while moving on the road indulging to their favorite music jam.
- HANDLEBAR MOUNTABLE: This small stereo receiver set includes mounting brackets, accessories, instructions for easy installation. The chrome speakers are equipped w/ mounting clamps to easily attach to the handlebars. Also includes 12V DC power cable.
- Includes Two handle-bar Mount Aluminium Diecast Weatherpr....
Check StockCT Sounds AT-60.4AB 420 Watt Class AB Competition 4 Channel Car Amplifier
- Equipped with a Diode 6A60 for reverse polarity protection along with a 4-way protection circuitry.
- sleep easy at night knowing your 4ch car audio amplifier is protected.
- Built using an advanced PCB board featuring industry-leading capacitors, high quality transformers and cutting-edge inductors to ensure this 4ch car amplifier delivers the power you need to destroy the competition in the SPL lanes.
- LED logo, plexiglass bottom, and reinforced tiffany style RCAs gives this car stereo amplifier a prestigious look that is guaranteed to turn heads.
- Heavy duty heat sink design, high power MOSFET switching technology, and best in class internal components will ensure the amplifier for car speakers runs cool for even the most demanding playlists.
- 4 channel amplifier car audio rated 75W @ 4-ohm x 4-ch (14.4v).
Check Stock