Categories

Best Boat Hatch Solar Fan

Cam Latch, Slotted, Bright Nickel

  • Boat cam latch is with pefect finish and polished 316 stainless steel.
  • Marine latch flush door pull can be recessed into the hatch.
  • Boat latch supplies stainless steel hinge pin.
  • Boat hatch handle, locking arm height is adjustable which is secured with set screw.
  • Stainless steel cam latch, 3.68" Length and 2.99" width. overall height: 4.92" · The Screw hole on the patch is 0.21".
Check Stock

Amarine Made Marine Deck Hatch Boat Deck Hatch Access Hatch and Lid Marine Hatch for Boat 12-3/8" X 17-1/4" - White - 315mmx440mm (Black)

  • 【Material:】High qualtiy, the boat hatch is made from Non-Corrosion white ABS plastic to resist the marine environment,added some silicone and completely waterproof..
  • 【Dimensions】The boat hatches and doors overall size: 12-3/8" X 17-1/4" 315 x 440mm.Opening clearance:14"X 9-3/8" 358 x 240mm. Protrusion above deck: 0.7" 17mm.Intrusion below deck: 1" 26mm （Mounting screws not included）..
  • 【Hinges:】The marine boat hatch's lid hinges 180 degrees and completely covers the mounting flange, for an attractive flush finish. Rubber seal ensures weatherproofing when mounted on vertical surfaces. Supplied with 2 strong recessed handles easy to install, pre-drilled countersunk fastening holes (screws not included)..
  • 【Application】: Low profile hatch, designed for installation on internal or external flat surface.
  • Rubber seal ensures weatherproofing when mounted on vertical surfaces.
  • 【Protruded】Sturdy and the latches of the boat hatch doorclose firm and tight. Not flush. Smoothy Protrudes an inch or so from the surface where it’s mou....
Check Stock

KHJK Polished Marine Boat Cam Latch 316 SS Hatch Pull W/Turning Lock Lift Handle

  • Boat hatch pull ring lift handle, perfect for lifting open a floor locker hatch or for use on a pocket door..
  • Made of high quality 304 stainless steel,high strength & solid & durable.
  • High polished surface, corrosion resistance and durability in the saltwater environment...
  • Flush mount pull ring, easy to install and suitable for boat hatch locker.
  • Measurements:44x38x10mm/1.7x1.5x0.4 inch.
Check Stock

YUSOVE Boat Anti-Rattle Latch 316 Stainless Steel Lockable Hold Down Clamp Latch,Marine Hatch Hardware Fasteners,Pack of 2

  • Boat 316 stainless steel lockable hold down clamp anti-rattle latch,solid and excellent polished finished.
  • Boat Anti-Rattle Latch is made of stainless steel 316 casting,maximum corrosion resistance and durability in the saltwater environment.
  • Boat locker cabinet hatch anti-rattle latch,lockable,the detail size refer to the left picture.
  • Boat lockable hold down clamp latch used for marine,boat,hatch cover,door,yacht,locker,etc.
  • Package Includes:2 pcs hold down clamp latch,stainless steel 10# mounting screws.
Check Stock

Hoffen 8 inch Hatch White Round Non Slip Inspection Hatch w/Detachable Cover for Marine Boat Yacht

  • ...to the sun for a long time, it is not easy to deform and become brittle. Excellent corrosion resistance makes it durable in rain and sea water environment. High impact resistance also allows it to be installed in places exposed to heavy treads, such as ship decks..
  • 【Anti-Skid Design】 Circular Non Slip Inspection Hatch is designed with square concave-convex surface, which is non-slip and wear-resistant to prevent people from falling. It also gives people a luxurious visual effect and a pleasing feeling. Carefully polish and trim the edges, smooth and not cut your hands..
  • 【Excellent Sealing Performance】 Inside the Boat Round Non Slip Inspection Hatch built with rubber sealing ring and thread make Boat Hatch Deck Plate have better sealing performance. Better waterproof and dust-proof effect. Inner Diameter : 6 inches, Outer Diameter : 7.8 inches, Cutting Size : 6.35 inches..
  • 【Easy to install and use】This Detachable Round Deck Plate is easy to install, detachable design, no need for professional installation skills and complicated tools. Old equipment can be replaced directly. 180°opening hatches, independent cover and chassis, allowing vertical or horizontal installation, and a wider range of applications. we intimately equip you with 6 pieces....
Check Stock

Jackson 20-1060 Floor Mount Bottom Pivot Set

  • Application:Boat flush pull latch can be installed in 2in / 5.08cm mounting holes, suitable for boat deck doors, latches, cabinet hardware floors, drawers, etc.Please check your vehicle models before ordering..
  • Material:Marine hatch lock is made of 316 stainless steel, which has high strength, and is rustproof, can be used in the saltwater environment..
  • Advantage:Boat hatch lift lock with back plate is flush pull type, exquisite and careful workmanship, easy and convenient to use. Great choice for your boat.With elaborate manufacturing technology, boat flush pull lift lock has high reliability and stable performance, can be used for a long time..
  • Easy to install:The installation is simple, no complicated operations, no complicated tools required, convenient and easy for you to use.You can use with confidence..
  • Best Experience :We strive to provide you with the best quality products and the best customer experience.We try our best to meet your requirements.Please check the product information carefuly berore buying to aviod making mistakes..
Check Stock

Boat Shortside Hinges,316 Stainless Steel Mirror Polished Marine Heavy Duty Hinges 1-1/2 Inch x 2-1/4 Inch,Pack of 2, Include Installation Screws

  • Materials:The boat shortside hinges are made of marine grade 316 stainless steel.maximum corrosion resistance and durability in the saltwater environment..
  • Application:Boat hardware hinges for interior hatch,locker,hatch windshield,deck hatch,compartment,doors and more..
  • High quality:Marine shortside hinges good construction, flexibility,Solid metal slab, very strong,mirror polished surface..
  • The size:Heavy duty hinges length:2-1/4 inch (57mm), width :1-1/2 inch (38mm),thickness: 3/16 inch (4.5mm).nstallation screw,it is very easy to install. Length:2-1/4 Inch (57mm), Width :1-1/2Inch (38mm),Thickness: 3/16 Inche (4.5mm)..
  • Easy to Install:Marine grade casting hatch hinge with installation screw,it is very easy to install..
Check Stock

Solar Powered Roof Fan 5W Solar Panel Vent Fan Weatherproof Metal Shell Design Without Battery Up to 238 Sq Ft, 136 CFM for Small Sheds,Chicken coops, Greenhouses, Cabins

  • 【COOL AND CLEAN】- This is a perfect solar fan for small chicken coops, sheds, greenhouses, pet houses, boat cabins and more. 5W solar roof fan can exhaust hot air and bad smell, let in fresh air, improve temperature and humidity..
  • 【EASY INSTALLATION】- There are four long strip mounting holes on both sides of the housing, which is convenient for you to fix the fan to any wall or roof. Installation requires self-provided screws and tools..
  • 【STURDY AND DURABLE】- The galvanized steel Shell is covered with black anti-rust paint, brushless waterproof motor with a service life of more than 10,000 hours, which is specially designed for long-term outdoor use in any weather..
  • 【FREE POWER】- Powered by completely free solar energy, no need to use household power, it will work automatically when the sun shines..
  • 【WORRY-FREE SHOPPING】 - We provide a one-year warranty for this fan, and you can get a free replacement if there is any problem..
Check Stock

Amarine Made Stainless Steel Cable Cover,Boat Transducer Wiring Cover,Clamshell Vent Wire Cover Clam Shell Vent for Boat (1-3/4\

  • Boat access hatch round deck cover hatch made of ABS material,Sleek new black colored finish, anti-corrosive,anti-ultraviolet.that you can rely on for years..
  • Marine access cover plate with slip-proof surface which help make safe installation on both horizontal and vertial place. Detachable cover and pre-drilled holes in deck plate easily to install.Reinforced lid with non-skid surface..
  • Inspection hatch cover with O-ring sealed deck plates are ideal for interior and exterior applications.Deck plates has eparate cover plate and chassis..
  • Marine inspection cover can install this on the rear well area of kayak to access anything that makes its way to the back and to drain any water that gets in easier.round deck cover hatch have so many uses from boat ,sub boxes, secret hiding places..
  • Package Includes:1 pcs deck plates for boats,1 pcs O-ring sealed ,6 pcs stainless steel screws ,But be aware that the nominal size is the opening size, not the outside diameter of the hatch.Opening Dia: 6" /151mm :External Dia: 7-4/5" (198mm) ,Cut Out Dia:6-1/3" (161mm).
Check Stock

SeaLux Marine 316 Stainless Steel 180 degree Flush Mount Hatch Hinge 2-3/4" x 1-5/8" for Boat, RVs (Pair)

  • Pair of SeaLux Marine 316 Stainless Steel 180 degree flush mount 2-3/4″ x 1-5/8″ Hatch Hinges for boat, RV.
  • SeaLux 180 degree hinges fit flush in your boat and fold back 180 degrees so that your hatch can lay flat in the open position. They are ideal for flats and fishing boats..
  • Constructed of stamped corrosion-resistant 316 stainless steel..
  • These gleaming, mirror polished Stainless Steel Hatch Hinges are built to last and will stand up to the elements..
  • Require RH #8 flat head mounting screws for perfectionist installation..
Check Stock

SWNAQUY CZMY 105x50mm Stainless Steel Boat Locker Hatch Anti Rattle Latch Fastener Hold Down Clamp-Locking Cam Latch Boat Caravan 90 Degree

  • Boat cam latch is with pefect finish and polished 316 stainless steel.
  • Marine latch flush door pull can be recessed into the hatch.
  • Boat latch supplies stainless steel hinge pin.
  • Boat hatch handle, locking arm height is adjustable which is secured with set screw.
  • Stainless steel cam latch, 3.68" Length and 2.99" width. overall height: 4.92" · The Screw hole on the patch is 0.21".
Check Stock

smartmarine White Marine Deck Access Hatch 17.3“×12.4" Boat Hatch & Lid,Rectangle Boat Deck Hatch

  • 1).High Quality ➯ Solid ABS material. Weather-tight and rectangle deck plates.Anti-corrosive.
  • 2).Features ➯ Rectangle Boat hatch lid.
  • 3).Apply to ➯ This white boat hat lid is suitable for all kinds of Boats/Yachts/RV. Ideal for interior and exterior applications.
  • 4).Dimensions ➯ Outside Length: 17.3" (440mm).
  • Inside Length:13.8”(350mm),Inside Width:9.25”(235mm).
  • 5).Installation ➯ Easy to install. This boat hatch can be installed vertically and horizontally180 degree opening lid,lock design.Pre-drilled countersunk holes (screws included).
Check Stock

Kidfavor H108 RC Boat-20+ Mph High Speed Remote Control Racing Boat for Adults and Kids & Pools and Lakes 2.4 Ghz Fast Electric RC Water Boat Toy for Boys& Girls 3 Batteries

  • 20+ Mph High Speed RC Boat: The H108 remote control boat races across water at 20+ mph high speed.
  • 2.4GHz transmitter supports up to 150 meter control....
  • Easy Control for Kids and Adults: Feature with Low power Alert, Out of range Alert, Emergency stop ensure safe play.
  • Much More Play Time and Fun : Come with 3 batteries allow you to play with H108 for a much longer time；the water cooling system can make the motor....
  • Double-hatch Waterproof: the remote control boat covered by double-sealed hatch improved the waterproof ability. Kids can play this rc boat in pool,....
  • Quality Assured Gift: The H108 RC boat is the fastest freshwater remote control boats, easy and fun for kids and adults. Long Press the Demo button,....
Check Stock