Categories

Best Boat Steering Wheel And Cable

Barco Sin Timón (Plena)

  • 【COMPLETE ACCESSORIES】It comes with 13.5" Steering Wheel, Swivel Helmet, Standard 3/4" Tapered Steering Axle.
  • 16ft Steering Cable, Hardware, 90 Degree Bezel Kit..
  • 【High Quality Material】The steering kit is made of cast steel and 304 stainless steel seamless tube and corrosion resistant material, which is durable and stable. The rotary rudder is well welded, well polished, and of good size. The cables are made of stainless steel and high-quality rubber to ensure the surface is free from corrosion, rust, cracks and leaks and to keep the accessories shiny. Flat interface design, better and stronger marine steering system kit..
  • 【Easy To Install】The marine steering kit is easy to assemble, you don't have to configure the parts separately, it can be adjusted according to your needs..
  • 【Easy Operation】This rudder system is designed to minimize your effort to drive the boat and make the boat turn accurately to ensure you have a pleasant boating experience every time you use it..
  • 【Wide Application】Specially designed and developed for marine use. This outboard steering kit is suitable for mechanical/manual steering of yachts, fishing boats, electric push boats and other water vehicles..
Check Stock

Homyl Stainless Steel 3 Polished Spoke Steering Wheel 350mm For Marine Boat

  • Boat Steering Wheel With Detachable Handle.
  • Supper Rusty Resistent Steering Wheel With Two Layers Of Surface Protection.
  • fits all standard 3/4" tapered shaft helms.
Check Stock

AISI 316 Stainless Steel Boat Steering Wheel Knob, Marine Steering Wheel Maneuvering Knob

  • Boat Steering Wheel With Detachable Handle.
  • Supper Rusty Resistent Steering Wheel With Two Layers Of Surface Protection.
  • fits all standard 3/4" tapered shaft helms.
Check Stock

BBH Outboard Steering System Mechanical Boat Rotary Steering Kit with 12 Feet Outboard Steering Cable,3/4 Tapered Shaft,13.5 Inch Wheel,Turbine Steering System

  • Compatible with such brands as Yamaha, Suzuki, Honda, Mercury, Nissan, Tohatsu and more..
  • Made of cast steel and 304 stainless steel seamless pipe, durable and anti-corrosion..
  • Comes with a 13.5” steering wheel, rotary helm, standard 3/4" tapered steering shaft.
  • 12 ft steering cable, hardware, 90 degree Bezel kit..
  • Package includes a whole set of accessories and instruction, easy to install..
  • This boat rotary steering system is designed to minimize the turning effort you have to put in and increase the boat steering accuracy. Therefore, you can have the best driving experience..
Check Stock

Mojiate Made Outboard Steering System 14' Boat Steering Cable 14 Feet Marine Steering System 3/4'' Shaft with Stainless Steel 13.5 Inch Wheel for Yachts and Waterborne Vehicles

  • 【Rotary Steering System】The boat steering systems have excellent performance and can make the ship steering more precise..
  • 【Durable Material】Made of cast steel and 304 stainless steel seamless pipe and corrosion-resistant materials，durable and steady..
  • 【Flexible Screw】 It can be adjusted according to customer's own needs. It can suits many types of people..
  • 【Complete Accessories】Rotary Helm, 14' Steering Cable, Hardware, 90 Degree Bezel Kit, Standard 3/4'' tapered steering shaft..
  • 【Steering Wheel】Steering wheel with hub , center cap with Knob,13.5" Size..
Check Stock

Replacement Boat Steering Wheel 12-1/2 Inch Pontoon Boat Accessories Marine Aluminum 3 Spoke for Yacht Speedboat Cruiser

  • Universal Replacement Steering Wheel, it can fit for most bayliner boat, tracker boat, pontoons, bass boats, sea ray boat..
  • Sturdy structure. it is made of 3 aluminum alloy spokes, and the grip with soft PU foam cover..
  • Size, Outer Diameter is 12.5 inch, 3/4 inch tapered shaft..
  • Ergonomic design, it has three smooth finger grooves along the steering wheel..
  • Useful boat steering console accessories..
Check Stock

Sagebrook Home 14854 Metal 36\ Boat Wall Accent, Multi

  • Wooden Ship Wheel Decoration: The nautical beach boat steering wheel is handcrafted with high quality wood and just rope.Ship Wheel Size: 11*11 inch/ 28*28cm((L * W).Thickness:15mm,very sturdy.Perfect wall decoration for nautical ,beach or lake themed party or events..
  • Nautical Design:This wooden anchor painted light blue with natural rope on it. The surface of the wooden nautical anchor is distressed to show the minimalist style.Make it the perfect nautical wall art hanging decor to accent your home..
  • Hanging Wall Decor:This wooden ship wheel is wide applicable occasion for home, bar, coffee shop, beach restaurant or parties, nautical style DIY photo wall, travel photos, Christmas cards, souvenirs. Make the wooden boat steering wheel an essential wall decoration for your living room, bedroom and dormitory..
  • Easy to Install:Comes with a small metal triangle hook on the boat steering wheel top and is easily mountable to a wall in need of a beach decoration.It can meet the needs of Hawaiian style room decoration..
  • Perfect Gift:Great gift for those who love sailing and nautical wall art. A perfect nautical wall hanging decor to accent your home with other Mediterranean ornaments like fishing net,sea shells,wood lighthouse,nautical chairs,ect..
Check Stock

VEVOR Hydraulic Outboard Steering Kit 300HP, Hydraulic Steering Kit Helm Pump,Hydraulic Boat Steering Kit with 22 Feet Hydraulic Steering Hose for Boat Steering System

  • Hydraulic Outboard Boat Steering Kit: The hydraulic outboard boat steering kit includes a steering cylinder, a steering pump, a 13.5" steering wheel, and a 22ft hose kit. It is a perfect replacement for your aging or broken equipment and becomes a good companion for your sailing trips..
  • Aluminum Alloy Steering Cylinder: Output force: 468 KGF. Steering cylinders come with an upgraded sealing system for maximum protection from saltwater and compression set. Positionable stainless steel O-ring (ORB) fittings for easy hose routing. And the robust barrel is made of aluminum alloy, which is wear-resistant, corrosion-resistant, and does not fear seawater erosion..
  • Max. 300HP Helm Pump: Max. Working pressure: 6.9 Mpa/1000 psi. The hydraulic pump has a replaceable shaft seal, built-in locking valve, relief valve, ORB fittings, and airbag. Allow you to use the equipment securely and conveniently..
  • Nylon Hose & Steering Wheel: The 13.5" steering wheel is made of aluminum alloy and high-quality plastic. The 22" nylon hose with quick-fit 1/4 fitting is easy to install. And the hose can be cut to the desired length..
  • Great Partner for Your Boat: Works for boats up to 60 MPH with single outboards up to 300 HP. Outboard-powered boats like the center console, offsho....
Check Stock

Amarine Made Aisi 316 Stainless Steel Marine Sport Boat Steering Wheel Knob with Plastic Cap Maneuvering Knob - L

  • The Boat Steering Wheel Knob is made of machined and polished Aisi 316 Stainless steel,rust-free,sturdy construction,you can use it on Jeep,tractor,boat,everything with a steering wheel..
  • Fits most steering wheels with rim diameter from 5/8" to 1",This device gives you full control of the wheel at all times. Whether cruising, trolling or running the wheel is always in complete control with only one hand..
  • All Stainless Steel Steering Wheel Maneuvering Knob.It is made to fasten over on a wheel spoke which gives an unequivocal positive control of the wheel. In boats you'll often have one hand on the throttle and one hand on the wheel, this device allows you total control of the wheel using only one hand and you never need to let go of the wheel..
  • The compact size keeps it from being an issue on center console. It's easy to grip and control with the web between thumb and index finger or by wrapping fingers around and over the top of the ball..
  • When it's tightened up securely it's not going anywhere. You don't have to fight with this to get it installed and it go on the wheel very easily..
Check Stock

Hypersonic Large Steering Wheel Knob Spinners Universal Vehicle Steering Wheel Spinners Ball Suicide Knob for Car Trucks Tractors Boat

  • ✅【Easy to Install & Sturdy】Installed Vehicle Steering Wheel Knob Spinners in about 1 minutes.
  • also It is fine if the two parts of base don't touch each other. What's important is that the Steering Wheel Spinners don't move on the steering wheel and are installed correctly. There was rubber, wrench and screws..
  • ✅【Universal Power Handle】Large Steering Wheel Knob for Thick Steering Wheel. And with a Bigger Size Base than other Spinners, it fits most Cars, Trucks, Tractors, Mowers, Forklifts and Boat.
  • Fits steering wheel Diameter 1.3" - 1.6", also if your steering wheel has a small diameter, please use the supplied rubber strip..
  • ✅【Effortless Driving】Black Steering Wheel Ball makes it SO much easier for you to steer your car! For drivers with shoulder or arm disease, it can relax you. For long-distance drivers, it can relieve your fatigue. Vehicle suicide knob from Hypersonic, it is good steering wheel accessories for driver..
  • ✅【Work Fine】Vehicle Steering Wheel Ball Knob is not Metal but Plastic, don't damage steering wheel, the ball is super strong, safe and useful..
  • ✅【Warm Notes】Don't discard the Rubber Piece, The rubber that it comes with is good, both to increase friction (on smoother steering wheels), and to protect the....
Check Stock

Bestauto Boat Steering Cable 12' Outboard Steering Cable 12 Feet Mechanical Rotary Steering Kit with 13 Inch Wheel for Boat Steering System

  • Rotary Steering System: Boats up to 24' and steering wheels up to 16". The boat steering helm kit is designed to provide outstanding performance for the boat steering system, allowing the boat to steer accurately and improve working efficiency..
  • 12 Feet Steering Cable: The 12 ft cable is long enough to keep enough space for your operation. Besides, the tensile strength is higher than similar products. Please verify this is the Correct Cable Length for your application..
  • Excellent Quality: The rotary helm is well welded and polished with a moderate size, which is sturdy and durable. The cable is made of stainless steel and premium rubber to ensures the surface from corrosion, rust, cracking, and leakage and maintains the fittings' gloss..
  • Simple Installation: With complete accessories, the marine steering kit is easy and quick to assemble as you don't have to configure the parts separately. Besides, a simple snap-in cable connection and different mounting hardware are provided to ensure fast installation..
  • Directly Replacement: This outboard steering kit is mainly applied in mechanical/manual steering for yachts, fishing boats, electric push roads, electric push boats, and other waterborne vehicles..
Check Stock

E-Motor Nations Grease, Polyrex EM, Electric Motor Bearing Grease, Blue Color

  • STA-LUBE: Sta-Lube offers a range of high performance greases.
  • Highly efficient products have been rigorously tested to meet the highest quality standards.
  • MARINE WHEEL BEARING GREASE: Sta-Lube Marine Boat Trailer & Wheel Bearing Grease is a tacky.
  • calcium sulfonate complex grease that is extremely water resistant and uses a highly refined base oil.
  • providing superior rust and corrosion protection.
  • DURABLE FORMULA: The calcium sulfonate complex thickener provides long-lasting performance for use in boat trailers.
  • APPLICATIONS: Ideal to use on anti-friction bearings.
  • PRODUCT SPECIFICATIONS: This marine grease is available in a 3 pack of 3 wt oz cartridges.
Check Stock

Amarine-made Stainless Steel Boat Steering Wheel 3 Spoke 13-1/2\ Dia, with 1/2\-20 Nut and Turning Knob for Teleflex Cable Helm

  • 【Material 】: Made of Vision Cast Marine Grade 316 Stainless Steel with highly mirror polish finish, durable to resist the harsh marine environment. Attractive three spoke design with turning knob..
  • 【Size】: 13-1/2" Diameter High quality 3 spoke stainless steel, 1/2"-20 Nut, fits all standard 3/4" tapered shaft helms..
  • 【Features】: Welded Spin Knob with Teflon washers and adjustable tension nut..
  • 【Easy To Use】: Be sure to choose the correct steering wheel/nut combination SeaStar hydraulic helms and Verado helms use a 5/8"-18 nut Teleflex manual cable type steering helms use a 1/2"-20 nut UFLEX/Ultraflex helms are made in Italy and use a metric nut..
  • 【Package Included】: 1 x 13-1/2" Dia Stainless Steel Boat Steering Wheel.
Check Stock