Best Boat Trailer Axle Hub Assembly
The ROP Shop (Pack of 8) Trailer Axle Kits with 4 on 4" Bolt Idler Hub & 1" Round BT8 Spindle
- Replacement (Pack of 8) Trailer Axle Kits with 4 on 4" Bolt Idler Hub & 1" Round BT8 Spindle.
- Specs - 1,250 lb Hub Capacity, Used On 2,000 lb Axle Shaft 1 Diameter: 1 1/4" Shaft 2 Diameter: 1" Shaft Length: 8 3/4" (4" Long Stub) Hub A Diameter.: 2 1/2" Hub B Diameter: 5 1/2" Bolt Pattern: 4". Refer to images 2 & 3 for more information.
- Includes - (8) Idler Hub with Lug Nuts, (8) 1" BT8 Round Spindle with Castle Nut, Pin & Washer, (16) Inner/Outer Bearings, (8) Double-lip Grease Seal (1 1/4" I.D. / 2" O.D.), (8) 2" Grease/Dust Cap.
- Assembly with 4 on 4" bolt idler hub & 1" round BT8 spindle. Rated to 1,250 lbs. each or 2,000 lbs. for the pair.
- Fits 2,000 pound trailer axles with straight spindles, but to know if this hub is the right fit for your setup you would want to check the size your current bearings and make sure that they match up with the 1" bearings that these hubs come with as well as knowing that you have a standard length spindle. This Hub fits standard length spindles, not "short spindles".
Check StockTrailer Butler Portable Electric Trailer Dolly
- Electric trailer dolly moves up to 12,000 pounds.
- Heavy duty trailer dolly is portable, travels on the trailer..
- 12 volt battery powered trailer dolly is pre-wired and ready to use..
- Single tire design makes this the easiest turning trailer dolly on the market..
- Easily moves trailers on all surface types including gravel, rocks, grass, asphalt, concrete, and inclines. Patent pending design transfers.
- Heavy duty steel construction means our products are built to last..
- Auto braking feature for safety. Trailer Brake control standard on XHD model.
- Patent pending design delivers maximum traction for unmatched performance on multiple surface types..
- Works on all trailer types including travel trailers, boat trailers, food concession trailers, and cargo trailers..
Check Stock
GREPSPUD 4pcs 1.98'' Trailer Hub Bearing Dust Caps, Trailer Axle Dust Cap Cup Wheel Center Grease Cover Caps & 4pcs Extra Rubber Plugs for 2000 to 3500 lb Boat Trailer Dexter EZ Lube Trailer Camper RV
- 【WITH EXTRA 4 SEALS】- You will receive 4pcs 1.98 inches trailer axle covers & 4pcs extra rubber plug, enough to meet your daily use or replacement. The extra 4 rubber plugs can be used as spare parts in case of emergency. This is a value-for-money set!.
- 【HEAVY DUTY & ANTI-RUST】- These trailers dust caps are made of high quality carbon steel and rubber, surface zinc-plated, strong and durable, not easy to deform, anti-corrosion & anti-rust, long-term service for your trailer..
- 【PRACTICAL TRAILER PARTS】- The trailer axle cap is designed to avoid the trailer axle from dust, preserve the grease, prevent axle corrosion and as decoration. Hub grease caps are designed with removable rubber plugs, easy to install and maintain..
- 【SIZE & COMPATIBLE WITH】- OD: 1.98 inch/50.4mm. Please check the size information and compatibility carefully before placing an order. Fits most standard 2000 -3500 pounds trailer wheel hub for both types of axles EZ Lube and standard. Fits standard brake & idler trailer axles for most 4 lug & 5 lug axles with 1.98 in diameter cap..
Check Stock
(2-Pack) AR-PRO 6-Inch Boat Trailer Jack Wheels - Universal Fit Black Plastic Caster Wheels - Includes All Mounting Hardware - Suitable for Boat Trailer Jacks with 1 or 2 Wheels
- 1 PAIR OF CASTER WHEELS FOR BOAT TRAILER JACK - This is a universal replacement for boat trailer jacks. Wheel dimensions are 5 5/8 diameter (6-inch nominal diameter), 2 inches width, and a 5/8 bore hole.
- DURABLE PLASTIC CASTER WHEELS - Complements the marine boat trailer jack’s durability. Can withstand constant water exposure and can resist wear and abrasion from heavy use. Each caster wheel can support up to 1,200 lbs.
- INCLUDES BOLTS, NUTS, BUSHING, AND WASHERS - This pack includes 2 caster wheels, 2 short axle bolts (with 2 nuts, 2 washers, and 2 sleeves), and 1 long axle bolt (with 1 nut, 1 washer, and 1 sleeve).
- CORROSION-RESISTANT HARDWARE - All mounting hardware has a corrosion-resistant finish for enhanced longevity in coastal environments.
- SUITABLE FOR UNITS THAT USE 1 OR 2 WHEELS - Includes hardware for boat trailer jacks that only require one 6-inch caster wheel and units that use 6-inch dual wheel casters.
Check StockLippert Replacement 10" Brake Hub Drum Assembly for RVs with 3,500 lb. Axle; 5 on 4.5" Bolt Pattern; 1/2" Studs; Fully Assembled with Bearing Cones, Seals, Grease. Limited 1-Year Warranty – 814200
- GENUINE REPLACeMENT PART — Lippert helps you take the guesswork out of getting your trailer back on the road with exact-match replacement parts.
- MUTIPLE OPTIONS — Our trailer brake hubs are available in a variety of bolt patterns, axle ratings and sizes to fit your needs.
- DURABLE CONSTRUCTION — This industry-standard hub assembly is constructed from solid grey iron.
- RELIABILITY — Our brake hubs are expertly engineered and powered by a name campers trust.
- ONE-YEAR LIMITED WARRANTY — Our brake hub drum assemblies are backed by a one-year limited warranty on hub components.
Check StockLippert Replacement 12" Brake Hub Drum Assembly for RVs with 6,000 lb. Axle; 6 on 5.5" Bolt Pattern; 1/2" Studs; Fully Assembled with Bearing Cones, Seals, Grease. Limited 1-Year Warranty – 814202
- GENUINE REPLACeMENT PART — Lippert helps you take the guesswork out of getting your trailer back on the road with exact-match replacement parts.
- MUTIPLE OPTIONS — Our trailer brake hubs are available in a variety of bolt patterns, axle ratings and sizes to fit your needs.
- DURABLE CONSTRUCTION — This industry-standard hub assembly is constructed from solid grey iron.
- RELIABILITY — Our brake hubs are expertly engineered and powered by a name campers trust.
- ONE-YEAR LIMITED WARRANTY — Our brake hub drum assemblies are backed by a one-year limited warranty on hub components.
Check StockFKG Trailer Bearing Kit for 3/4 Inch Straight Spindle, Set of 2
- Includes every component needed to repack one axle hub.
- Compatible with: Lippert, Dexter or Al-Ko trailer axle hubs.
Check StockLippert 333951 RV and Trailer Axle Bearing Replacement Kit
- Includes every component needed to repack one axle hub.
- Compatible with: Lippert, Dexter or Al-Ko trailer axle hubs.
Check StockLippert 333956 RV and Trailer Axle Grease Seal 2200LB 1.5 ID 1.987 OD 2 pack
- Fits 1,250 to 8,000 lbs. capacity trailer axles.
- Compatible with: Lippert, Dexter or Al-Ko trailer axle hubs with corresponding grease seal measurements.
- Provides protective barrier between the axle hub grease and the outside elements.
Check StockLippert 333961 RV and Trailer Axle Grease Seal 3500LB 1.719 ID 2.565 OD 10 pack
- Fits 1,250 to 8,000 lbs. capacity trailer axles.
- Compatible with: Lippert, Dexter or Al-Ko trailer axle hubs with corresponding grease seal measurements.
- Provides protective barrier between the axle hub grease and the outside elements.
Check StockLAFORMO Boat Trailer Hub with Bearing Kit - Set of 2 Trailer Idler Hub Kits 5 on 4.5 for 3500 lbs Axle…
- Set of 2 New trailer idler hub kits 5 on 4.5 for 3,500 lbs trailer axle.
- Bearing Kit Specifications:Outer bearing # 44649-- 1 1/16"/Inner bearing # 68149-- 1 3/8"/Seal inside diameter 1.719"/Seal outer diameter 1.983".
- Package Includes:2 x Hub / 2 x Inner bearing / 2 x Outer bearing / 2 x Seal.
- Feature:The surface of the hub is galvanized..
- These Hub are very suitable for ship trailers to withstand the harsh seawater environment..
Check StockRIGID HITCH INCORPORATED Trailer Hub Kit - for 1-3/8\ Inner / 1-1/16\ Outer Tapered Spindle - 5 Bolt on 5\ Bolt Circle
- Compatibility : Fits 2000 lb. Axles, Works on Dexter and other brands 2000lbs axle in the market.
- High Load Capacity and Accuracy: Has super load capacity and provides precise guidance for wheel rotation.
- High-performance Seal: Has good heat r-esistance, mud and sewage r-esistance, so it is suitable for a variety of complex and harsh environments.
- Spray Paint Protection Layer: Our Trailer Hub are uniformly surface-painted, which can greatly reduce or avoid oxidative c-orrosion on the wheel surface, and can maintain a beautiful appearance for a long time.
- Before You Buy: Please make sure the hub assembly matches your model. There are no installation instructions for this product, you can search for installation videos directly on YouTube..
Check StockOEMTOOLS 25749 Wheel Hub Removal Tool, Green Hub Bearing Removal Tool, Hub Buster Tool Prevents Axle Removal or Damage, Works for 5, 6, and 8 Lug Hubs
- Clean Break: Remove your damaged or frozen hub assembly without any risk of damaging the axle with this hub assembly removal tool.
- Your Go-To Tool: The hub puller tool is designed to work with any configuration of axle-bolted hubs, including 5, 6, and 8 lug hubs.
- If the Hub Fits: Hub removal is simplified with the 2-5/8” center-to-center hole pattern of this wheel hub puller, making installation easy and speeding up the hub removal process.
- Shielded With Steel: Trust in your wheel hub remover’s longevity with its 3/4" steel backing plate and reinforced striking plate, giving it the strength to endure any wear and tear.
- A Tool For the Ages: This wheel hub remover will resist rust and corrosion thanks to its high-quality steel construction, resulting in equipment you can rely on long-term.
Check Stock
