Best Boat Trailer Jack For Saltwater

CURT 28156 Marine Boat Trailer Jack with 6-Inch Wheels, 1,500 lbs. 10-3/8 Inches Vertical Travel

DEPENDABLE STRENGTH. This boat trailer jack is rated to support up to 1,500 lbs. trailer tongue weight, and it comes with bolt-on mounting hardware to readily attach to the trailer tongue.
CONVENIENT MOBILITY. For easier coupling and positioning of your boat trailer, this jack comes with dual 6-inch diameter trailer jack wheels.
EASY OPERATION. This trailer tongue jack allows for 10-3/8 inches of vertical movement and operates using a side-wind handle (12-5/8-inch retracted height, 23-inch extended height).
SWIVEL DESIGN. To ensure plenty of clearance while towing your trailer, this trailer jack stand is equipped with a swivel bracket. The jack swings up and out of the way for towing and features a heavy-duty pull pin to securely lock into place.
CORROSION-RESISTANT. For long-lasting corrosion resistance against water, dirt, road salt and more, this marine boat trailer jack is protected in a durable zinc-plated finish.

Check Stock

CURT 28276 6-Inch Caster Trailer Jack Wheel Replacement, Fits 2-In Tube, 1,200 lbs

EASY MOBILITY. Add mobility to your boat trailer or utility trailer with this 6-inch x 2-inch trailer jack wheel. It attaches to the trailer jack and allows for easier movement of the trailer, especially when coupling.
RELIABLE STRENGTH. Perfect for a wide variety of trailer types, this trailer jack caster wheel is rated to support up to 1,200 pounds tongue weight.
VERSATILE DESIGN. Perfect as a trailer jack wheel replacement, the versatile mount fits virtually any trailer jack with a 2-inch diameter tube.
INCLUDED PIN. For immediate installation, this trailer tongue jack wheel comes with a safety pin included. The safety pin secures the wheel onto the jack and can quickly be removed if needed.
CORROSION-RESISTANT. This jack caster also makes an excellent boat trailer jack wheel. The bracket is constructed from zinc-plated steel and the wheel is made from durable poly for long-lasting corrosion resistance.

Check Stock

Delaman Jack Pad Rubber Block for Hopper Stock Bin Durable Frame Protector 65x33mm

【Capacity】This boat trailer jack is rated to support up to 1500 lbs, and it comes with bolt-on mounting hardware to readily attach to the trailer tongue, 360 degrees rotatation double wheel make it stronger bearing capacity.
【Size】Travel Distance Length: 10 inch (254mm), Retracted Length: 12.6 inch (320mm), Extended Length: 22.6 inch (574mm) (measured from center of mounting plate to bottom of wheel).
【Convenient Mobility】For easier coupling and positioning of your boat trailer, this jack comes with an 6-inch diameter trailer jack double wheel and a convenient handle which allows you to easily swing jack in place.
Swivel Design】To ensure plenty of clearance while towing your trailer, this trailer jack stand is equipped with a swivel bracket with the 1/2" pull pin..
【Corrosion Resistant】This marine boat trailer jack is protected in a durable zinc-plated finish, for long-lasting corrosion resistance against water, dirt, road salt and more.

Check Stock

MYOYAY Swivel Trailer Jack with 6 inch Dual Wheel 1500 Lbs Capacity Heavy Duty Boat Trailer Jack Double Wheels Jack

【Capacity】This boat trailer jack is rated to support up to 1500 lbs, and it comes with bolt-on mounting hardware to readily attach to the trailer tongue, 360 degrees rotatation double wheel make it stronger bearing capacity.
【Size】Travel Distance Length: 10 inch (254mm), Retracted Length: 12.6 inch (320mm), Extended Length: 22.6 inch (574mm) (measured from center of mounting plate to bottom of wheel).
【Convenient Mobility】For easier coupling and positioning of your boat trailer, this jack comes with an 6-inch diameter trailer jack double wheel and a convenient handle which allows you to easily swing jack in place, pivot up to stow parallel to trailer tongue for travel, move back into upright position for use.
【Swivel Design】To ensure plenty of clearance while towing your trailer, this trailer jack stand is equipped with a swivel bracket with the 1/2" pull pin. The jack swings up and out of the way for towing and features a heavy-duty pull pin to securely lock into place.
【Corrosion Resistant】This marine boat trailer jack is protected in a durable zinc-plated finish, for long-lasting corrosion resistance against water, dirt, road salt and more.

Check Stock

Swivel Trailer Jack 2000lbs Capacity, 10.5" Lift, Dual 8" Wheel, Heavy Duty Boat Trailer Jack for Tongue Swing-Back Boat, RV Utility

LOAD CAPACITY 2000lbs:A-Frame Trailer jack has swivel plate double reinforcement. Gets rid of the hassle of hitching, making it easy to lift, level and adjust..
SWIVEL TRAILER JACK SIZE:Travel lift: 10.5" and Height range: 25"-35.4"..
LABOR-SAVING HANDLE:Boat trailer jack with handle bolt-on installation. 1/2" swivel pull pin. Tongue jack quality and sturdy can be used for 10-year. Don't worry about rustinghigh..
WIDE APPLICATION：All kinds of boat trailer, Swing-Back Boat, RV. Mounted on 3" x 5" trailer frame, 2" tongue trailer..
DUAL WHEELS: 360° swirl, diameter: 8", providing greater stability and mobility. Trailer jack fits any sand better soft ground roll, no sinking..

Check Stock

Boat Trailer Jack,Heavy Duty Trailer Jack with 6 Inch Dual Wheels,1500 lbs Swivel Trailer Tongue Jack,Bolt-on Trailer Jacks,10\ Vertical Travel, Black

【Corrosion Resistant Finish&Bearing Capacity】Boat Trailer Jack body is made of high quality black powder-coat corrosion-resistant steel,Zinc finish on the rest.Overall heavy-duty steel structure, reliable strength, long-lasting corrosion resistance.Features 1500 pound bearing capacity..
【Adjustable Height&Easy to Operate】 This trailer tongue jack allows 10 inches of vertical movement (12.6 inches retracted height, 22.6inches extended height).The ergonomic hand crank handle is easy to grasp and comfortable to hold,which allows you to easily swing jack in place,The height of the whole dual wheel jack will can be stretchable from 24.8inch to 34.8inch..
【Double Wheel Design】 For easier coupling and positioning of your boat trailer,each boat trailer jack is equipped with 6inch diameter double wheel at the base, can rotate 360 degrees,giving your trailer enhanced maneuverability without requiring you to fully lift up the trailer tongue.Compared with most wheels on the market, dual wheel trailer jack wheel replacement is stronger and more stable..
【Swivel Plate & Pull Pin Design】 For increased safety while towing and ease of use, this trailer jack stand is equipped with a swivel bracket,can 360° swivel.the jack swings up and out of the way for....

Check Stock

osemar Boat Trailer Jack with Wheel 1500 lbs 6\ Dual Wheels Swivel

Small trailer jack wheel, , lifts and lowers your boat trailer, lifting capacity: 1500 pounds, adjustable height: 10-1/2"..
Trailer jacks using precision seamless steel pipe, the surface is galvanized, anti-corrosion and anti-oxidation..
Boat trailer jack heavy duty thicken and widen, high-load double nylon wheels, loose nut, effortless implementation and high safety..
1500 trailer jack mounting plate and interface are double-layer reinforced, with strong bearing capacity and durability..
boat trailer stand crank handle is upgraded, the installation screw cap is detachable, and the handle cover is more convenient to replace..

Check Stock

Trailer Jack Wheel Replacement 2000 lbs, 6' Trailer Jack Foot Wheel, Dual Wheel Swivel Trailer Tongue Jack Wheel for Trailer Jack with Pin for Boat Trailer Camper Rv

【Compatible with 2" Diameter Jack Tubes】：Perfect as a trailer jack wheel replacement, the dual wheel trailer jack wheel Fits All Standard trailer Jack, Electric A-Frame Jack, easy to move popup camper, pop up traile, utility trailer, boat trailer, flatbed trailer.
【Upgrade Dual Wheel】: Compared with most singel wheels on the market, dual wheel trailer jack wheel replacement are more stable, firmer, and carry more weight.
【Support Up to 2000 Ibs】: Perfect as a trailer jack wheel replacement, support up to 2000 pounds tongue weight, Comes with a heavy duty retaining Clip-Pin, The weld for the lock nut is Very tight and will not loosen.
【Easy Mobility】: Add mobility to your boat trailer or utility trailer with this 6-inch x 2-inch trailer jack wheel, The wheels allow you to move it easily into dirt or concrete campsites, on rough pavement or gravel..
【Corrosion-Resistant】: This trailer jack foot wheel bracket is constructed from zinc-plated steel and the wheel is made from durable poly for long-lasting corrosion resistance, Adapt to any weather.

Check Stock

TYT 2000lbs Boat Trailer Jack, Heavy Duty Swivel Trailer Jack with 6 Inch Dual Wheels, 12 inches Lift, Zinc-Plated Finish for Boat, RV, Trailer, Camper

【Efficient and Durable Trailer Jack】: Featuring dual sturdy 6-inch poly wheels and a heavy-duty steel construction, this trailer jack can lift up to 2000 lbs with ease. The outer tube has a diameter of 2.5 inches and can provide a maximum lifting height of 12 inches, making it a perfect fit for most trailer tongues. The package size is 65cm*17cm*17cm, with a weight of only 8.35 kg..
【Bolt-On Mounting Hardware】: This trailer jack comes with bolt-on mounting hardware, making it easy to attach to the trailer tongue. The jack capacity is 2000 lbs, ensuring that it can handle most trailer lifting needs..
【Easy to Operate】: This trailer jack features a side-wind handle that allows for smooth and easy operation. The jack can be adjusted to fit specific operation requirements, with a retracted height of 26 inches and an extended height of 38 inches..
【Heavy Duty Material】: Made from heavy-duty steel, this boat trailer jack provides an excellent mounting facility. It is protected with a durable zinc-plated finish, ensuring long-lasting corrosion resistance against water, dirt, road salt, and more..

Check Stock

Extreme Max 3005.3825 Side Mount Roller Guide-On System

Includes a pair of boat trailer roller guide-ons for close applications (boat must be at least 3" narrower than trailer frame).
Zinc-coated for freshwater use, not intended for use in saltwater or brackish water.
Fits bunk or roller-style trailer frames up to 3" wide x 4.5" tall.

Check Stock

JFATXTT 4\ Boat Trailer Roller Bow Stop with 1/2\ Shaft Bow Stop for Boat Trailers Blue Bow Roller.

Includes a pair of carpet-padded boat trailer guide-ons perfect for 14' to 16' boats.
Fits bunk or roller-style trailer frames up to 3" wide x 4.25" tall*.
18" carpet padded bunks are vertically adjustable from 19" to 25" and sit on 96° angled vertical arms with up to 19" (3" trailer frame) or 21" (2" trailer frame) of total horizontal adjustment.
Zinc-coated for freshwater use, not intended for use in saltwater or brackish water.
The size and shape of trailer frames can vary drastically, please measure your boat on the trailer before ordering to ensure a proper fit.
Hardware to fit taller trailer frames (5.25" and 6.25") is available, see long description.

Check Stock

Bolt- On Swivel Tongue Jack 6' Iron Core Wheel， Trailer Jockey Wheel 1200lb,10' Lift for Boat Rv Travel and Camper， Casters Can Locked (Size : 6in wheel/1200lb)

LIFTING ABILITY：Bolt- On Swivel Tongue Jack, 1200 lbs. capacity, with an additional 10" of travel and 10' lifting. Durable 6in removable cast iron wheels。.
HEAVY DUTY SWIVEL MECHANISM: heavy duty trailer jack pull pin activates the swivel mechanism, allowing you to swing the jack up and out of the way when not in use. Makes It Easy to Lift, Level, and Adjust..
BOLT- ON INSTALLATION: Equipped with mounting bolts， to mount up to a 3" x 5" Trailer Tongue Jack frame.
HIGH- QUALITY MATERIAL: trailer jack, the main body steel galvanized surface rust- proof design， After 72 hours of salt spray test，Corrosion- resistant zinc finish prevents rust even in the harshest environment..
WIDE RANGE OF USE: Telescopic Jockey Wheel lifts and lowers your boat or recreational trailer， The foldable design is convenient for driving and parking, and it is widely used for supporting various boat trailers, yacht trailers, RV campers..

Check Stock

MAXXHAUL Trailer Jack Wheel

Bolt-on trailer jacks for use with utility and boat trailers.
Our Jack features a swivel or swing back bracket that allows jack to be out of the way when not in use.
Heavy duty pull pin securely lock jack into place in the horizontal or vertical position.
Trailer tongue jack has a 10" vertical lift and includes a side wind handle with swivel grip for convenient operation.

Check Stock