Best Boat Trailer Keel Roller - TopShopReview.com

Festnight Boat Trailer Bottom Support Bracket with Keel Rollers for Boats from 2' 7\ 4' Wide

Can be installed on a boat trailer to support the bottom part of the boat, which makes it indispensable for your trailer and vessel..
The width of our bottom support bracket can be adjusted, it is perfect for boats from 2’ 7” – 4’ wide, which suits both big and small vessels..
Constructed of high quality zinc-coated steel, this bottom support bracket will offer you a long-term service life..

Helps center and guide the keel of your boat on to the trailer for level and safe trailering.
Efficiently helps roll your boat to the trailer bow stop.
Helps your boat from shifting side to side on the trailer.
Made from natural rubber to buffer and protect your boat.
5/8" diameter mounting hole for easy installation.

This boat trailer roller protects your boat bow with solid polyurethane and makes launching your boat easily.
This boat trailer roller is 5 inch long and 3 inch in middle and with 1/2 inch hole.
This assembly includes 3 inch bow roller, 2 Bells, and a stainless steel 1/2 inch diameter bolt to mount the assembly.
Will not rust or mark your boat, and neither flat spot.
Our product compatibility and reliability, design and construction, never fail attitude.

Smooth, non-marring, resilient protection for the keel of your boat.
Efficiently eases loading and launching your boat while helping to center your boat on the trailer.
Durable, protective rollers are for heavy-duty use.
Long lasting polymer construction makes it impervious to sunlight, chemicals and fuels.

Make loading your boat easier in bad weather: Use these roller guides to keep your boat centered during loading despite wind and waves, making it easier to load your boat..
Easy and fast installation: Trailer guides can be mounted on top or under the frame, and combination of long bolts and base plate can fit frames of different volumes..
Say goodbye to rust and breakage worries: Galvanized steel coating that is typically 3 mil to 5 mil thick. This thick, all-around coating allows galvanized steel products to provide years of use without rusting or corroding..
Don't worry about your boat getting hurt: Black rubber rollers with end caps protect your boat's surface..
Adjustable Width: 97° arms and 13" roller assembly.
up to 14" (3" trailer frame) or 16" (2" trailer frame) of horizontal adjustment, 6" bolt kits are available for trailer frames up to 5" tall..

Easy to Install: our boat keel guard can easily be installed, you can clean the boat keel part first, and then apply glues (not included) to the surface, after a few minutes, use the equipped spade to press the keel guard to make it stick tightly.
Trustworthy and Serviceable: our boat hull protector is mainly made of quality rubber, soft and solid, can keep your boat away from heavy crashes and scratches, not easy to tear or deform, which can serve you for a long time.
Suitable Size for Application: each of our black keel protector measures 182.88 x 12.7 x 1 cm/ 72 x 5 x 0.39 inches, approx. 6 feet in length, the size design makes it available for a boat that measures 18 feet.
Package Include: you will receive 2 pieces of black keel guards with 2 pieces of small yellow spades in different shape, the proper quantity can meet your replacement needs for boat keel protection, and you can use them for different boats and yacht.
Wide Range of Use: you can use our boat keel protection to keep guard of the keels or hulls of your boat, yacht or houseboat, which can make your boat safe ....

Includes a pair of boat trailer roller guide-ons for close applications (boat must be at least 3" narrower than trailer frame).
Zinc-coated for freshwater use, not intended for use in saltwater or brackish water.
Fits bunk or roller-style trailer frames up to 3" wide x 4.5" tall.

Includes one pair of Heavy-Duty Roller Guide-Ons with an easy, bolt-on installation that fits bunk or roller-style trailer frames up to 3" wide x 4. 25" tall.
Custom-formed 97° arms and 13" roller assembly.
up to 14" (3" trailer frame) or 16" (2" trailer frame) of horizontal adjustment.
Zinc-coated for freshwater corrosion-resistance, not intended for use in saltwater or brackish water.
The size and shape of trailer frames can vary drastically, please measure your boat on the trailer before ordering to ensure a proper fit.
6" bolt kits are available for trailer frames up to 5" tall.

PROTECTS YOUR BOAT against abrasive sand, rocks, concrete ramps, and oyster beds. Eliminate costly fiberglass and gelcoat repairs to boat keel..
DO-IT-YOURSELF INSTALLATION in under an hour. Application kit includes a patented burnishing tool to ensure professional results..
SUPERIOR ENGINEERING - The Original DIY Keel Guard - Developed with boat designers & 3M engineers. UV-STABILIZED COLORS don't fade or dull and last the lifetime of your boat. Made in the USA..
LIFETIME WARRANTY against abrasive wear and adhesion failure during normal use of your boat, for as long as you own your boat..
Recommended Sizes: 4ft - Up to 14ft Boat, 5ft - Up to 16ft Boat, 6ft - Up to 18ft Boat, 7ft - Up to 20ft Boat, 8ft - Up to 22ft Boat, 9ft - Up to 24ft Boat, 10ft - Up to 26ft Boat, 11ft - Up to 28ft Boat, 12ft - Up to 30ft Boat. If the size of your boat falls between 2 sizes, order up for the additional keel protection..

Includes one pair of Heavy-Duty Roller Guide-Ons with an easy, bolt-on installation that fits bunk or roller-style trailer frames up to 3" wide x 4.25" tall*.
Custom-formed 97° arms and 13" roller assembly.
up to 14" (3" trailer frame) or 16" (2" trailer frame) of horizontal adjustment.
Zinc-coated for freshwater use, not intended for use in saltwater or brackish water.
The size and shape of trailer frames can vary drastically, please measure your boat on the trailer before ordering to ensure a proper fit.
6" bolt kits are available for trailer frames up to 5" tall, see Extreme Max 3005.4065.

For use on boat trailers with automatic adjusting roller systems ONLY.
Efficiently helps roll your boat to the trailer bow stop or off the trailer for easy launching.
Smooth surface for easier rolling on to the trailer for loading or launching.
Made from natural rubber to buffer and protect your boat.
4-1/4" L x 4-3/8" dia. Fits 3/4" diameter shaft hardware.