Categories

Best Boat Trailer Wiring Kit

LIMICAR Trailer Wiring Harness Extension Kit, 36ft Trailer Wiring Harness with 4 Flat Extension Connector, 28' Male & 8' Female with 4 Pin Flat Wishbond Trailer Harness for Utility Boat Trailer Lights

  • 36FT (28' Male & 8' Female) & 4-Flat Trailer Wiring Harness Extension Kit: Fits Trailers under & over 80" wide. Wire length (36') makes this trailer harness kit perfect for trailers measuring under or over 80" wide..
  • 18 AWG Color Coded Wires Wishbone Style Harness: 4 flat trailer wire is color-coded and bonded wire for easily installation. White wire: Ground (Negative). Brown wire: Tail Lights. Yellow wire: Driver Side Stop/Turn Lights. Green wire: Passenger Side Stop/Turn Lights. The white ground wire is made of 18-gauge, reduce corrosion and makes installation safe..
  • 36' Trailer Wiring Harness: Designed to split at the trailer tongue and run down each side of the trailer, 4' trailer side ground wire is enough to use for your trailer. Gives you the extra length, just need to extend current truck to trailer wires. No need to splice your new wires, simply extend them with this extender..
  • 4-Way Flat Trailer Harness Kit: Complying with SAE J1128 standards for a low voltage primary cable. Constructed from the highest quality materials and superior quality guaranteed..
  • Widely Application: Suitable for marine boat trailer, horse trailer, ATV trailer, and other cargo utility trailer hitches (tow/haul vehicle must have 4-way plug). Not compatible with motorcycle....
Check Stock

SUZCO 25 Foot 4 Wire 4-Flat Trailer Light Wiring Harness Extension Kit 4-Way Plug 4 Pin 21 Male & 4 Female Extension Connector & Wishbone-Style with 18 Gauge White Ground Wire with SAE J1128

  • 【ITEM TYPE】This is a 21ft male & 4 ft female 4-flat marine trailer wiring harness with 4-way conductors and a 2ft white ground wire, made of 18-gauge wire, designed to split at the trailer tongue and run down each side of the trailer. The 4 flat trailer wire is color-coded and bonded wire to easily splice into your trailer's wiring system, no need for splicing wires. This trailer wire harness kit is completely sealed for a long corrosion-resistant installation..
  • 【EXTENSION INCLUDING】This 25foot 4 wire boat trailer wiring extension can conform to the SAE J1128 specification. Extends wiring system provides more flexibility. It can protect tow vehicle electronics from wiring shorts. Includes a 4-feet trunk connector, splices, and clips. This trailer wire harness kit also can work on an COPPER trailer based on the ground wire..
  • 【ENOUGH LENGHT GROUND WIRE】This trailer wire extension with 4 way flat plug connector is designed to supply power for tail lights, turn and brake lights, as well as a ground connection. The white grounding wire is so enough long to wiring. The trailer side ground wire is about 2ft. Trailer wiring harness features a ground wire. The white ground wire is made of 18-gauge, which is corrosion resistant terminal..
Check Stock

SUZCO 36 Ft 4 Wire 4-Flat Trailer Light Wiring Harness Extension Kit, Custom-Made 28' Male & 8' Female with 4' White Ground Wire, 4-Way Plug 4 Pin Male & Female Extension & Wishbone-Style & SAE J1128

  • 【ITEM TYPE】This is our SUZCO custom-made vehicle-specific 36FT male & female 4-flat marine trailer wiring harness with 4-way conductors and a 4' white ground wire, it fits for longer trailers and for customers desiring to wire, made of 18-gauge wire, designed to split at the trailer tongue and run down each side of the trailer. This trailer wire harness kit is completely sealed for a long corrosion-resistant installation..
  • 【36' EXTENSION INCLUDING】This 36foot 4 wire boat trailer wiring extension can conform to the SAE J1128 specification. Extends wiring system provides more flexibility. It can protect tow vehicle electronics from wiring shorts. Includes a 4-feet trunk connector, splices, and clips. This trailer wire harness kit also can work on an aluminum trailer based on the ground wire..
  • 【ENOUGH LENGHT GROUND WIRE】This trailer wire extension with a 4 way flat plug connector is designed to supply power for tail lights, turn and brake lights, as well as a ground connection. The white grounding wire is so enough long to wiring. The trailer side ground wire is about 2ft. Trailer wiring harness features a ground wire. The white ground wire is made of 18-gauge, which is corrosion-resistant terminal..
  • 【4-WAY CONNECTORS & FITMENT】You can inst....
Check Stock

LINKITOM Submersible LED Trailer Light Kit, Super Bright Brake Stop Turn Tail License Lights for Camper Truck RV Boat Snowmobile Under 80" Inch

  • Trailer Light Kit : Led boat trailer light kits has everything you need,includes two stop turn signals LED marker lights, two amber clearance lights, one 22 feet and one 4 feet wiring harness, license plate bracket, 4pcs complimentary reflective sticker..
  • IP68 Waterproof and Submersible: There is no screw on the lamp shade , the LED trailer lights are completely welded together, The circuit board of tail light is seal. A drain hole is designed to pull out all the water. This is to guarantee that water will not damage the diodes or circuit board. excellent tightness makes it be definitely waterproof and submersible.Please install the trailer taillights with the drain hole downwards..
  • Compliant with DOT standards: The lamp shade of utility trailer light kit with a new ABS material, 100% compliant with DOT standards.
  • 25ft wiring harness have more durable than the traditional copper coated aluminum wires and split Y-style color coded harness. Fully operable in inclement weather, these trailer lights are tough and durable for the long term..
  • Widely Used : Widely applicable to 80 Inch wi....
Check Stock

12v Magnetic Towing Tow Light Kit Trailer Rv Tow Dolly Tail Towed Car Boat Truck

  • Complete Trailer Light Kit: This Trailer Light Kit includes 2 combination tail and brake/turn signals lights, 2 amber LED marker lights ,25-ft wiring harness,license plate bracket and mounting hardware bag, everything you need to do the install included..
  • IP68 Waterproof and Submersible trailer lights: The circuit board is completely sealed and IP68 waterproof, which protects the board from short circuit even soak in the water, it can work long hour in rainy days, fog day or snow day, it is totally submersible(Test Underwater light for 24 hours)..
  • High Visibility LED Trailer Tail Lights: Super clear and brighter SMD 5050 lamp beads with Halo Glow design produces a super fashion light, no glare, Up to 50,000 hrs life expectancy.
  • Compliant with DOT standards, perfect replacement trailer lights for RV, tractors, canoes,towing vehicle, truck, trailer, boat, bus, Lorry, Van, caravan, snowmobile etc.
  • 25ft wiring harness, so that it is long enough to reach end of trailer,instruction included and 1 year warranty..
Check Stock

12V Trailer Led Light Kit, 2x Square Led Stop Turn Tail Brake License Plate Running Lights w/ 25ft Wiring Harness/6x Mini Marker Lights/15' 11LED Trailer Tail Brake Light Bar/License Plate Bracket

  • This 12v led trailer lights kit includes 2Pcs square rear combination tail lights, 6Pcs Mini Oval side fender marker lights (2Red+4Amber), 1Pc 15.5 Inch Trailer 3rd brake identification tail light bar, 25ft wiring harness with 4-flat plug(long enough to reach end of trailer), license plate bracket, mounting hardware. This trailer led light kit has everything you need to upgrade your trailers at once.
  • This boat trailer lights led submersible kit has multi functions: stop light, brake light, turn signal light, tail light, running light, rear reflex reflector, side marker light, side clearance lights, side reflex reflector, license plate illuminator, clearance Light, third 3rd brake light bar.
  • Wiring Tips: white wire is ground, yellow wire is high brightness for brake Light and brown is low brightness as Running Light/Left License Plate illuminator(Square tail Lights).
  • white is ground, red is high Brightness for brake/stop/turn light, black is low brightness as running Light(15.5″ led trailer light bar).
  • white is ground andblack is positive(mini side marker lights).
  • Brightness: Square LED trailer light has 15 Diodes (12 Red+3 Red) as stop, turn, tail, side marker, side reflex, and rear reflex functions and on left side Built-in license plate light(3 w....
Check Stock

Partsam 12V Waterproof Square LED Trailer Tail Light Kit Clear Lens Red Trailer Brake Stop Tail Turn Signal Running Lights License Kit for Camper Truck RV Boat Trailer Snowmobile Marine Under 80'

  • 4.56″ long x 3.78″ tall x 2.63″ deep.
  • trailer light kit with 2 stud mount waterproof LED tail lights, corrosion-resistant license-plate bracket, 25ft wiring harness(one 21.98 feet and one 3.93 feet wiring harness), stainless steel mounting hardware, 2pcs amber clearance lights and 4pcs reflective sticke. 2-stud mount on 2″ centers.
  • 2 Clear/Red, waterproof, stud-mounted LED trailer tail lights for less than 80″ trailers tractors truck boat snowmobile, esp. ideal for jet ski trailer lights. Square trailer light serves 7 functions: Stop light, Turn signal light, Tail light. Rear reflex reflector, Side marker light, Side reflex reflector, License plate illuminator(only for LH Side/Driver Side).
  • For this Red submersible LED trailer light kit, Right light has 16 LEDs (12 face, 4 side).
  • Left/streetside light has 21 LEDs (12 face, 4 side, 5 bottom). These trailer tail lights has no screws on the lamp shade, the LED trailer lights are completely welded together, The circuit board of tail light is seal. excellent tightness makes it be definitely IP67 waterproof and submersible. Of course, you can also put the clear epoxy around it for a guarantee.
  • White+ Yellow, front side works and is high brightness.
Check Stock

CZC AUTO 12V LED Magnetic Towing Light Kit for Boat Trailer RV Truck - Magnetic Strength 55 Pounds

  • STRONG MAGNETS: CZC AUTO 55 pounds magnetic trailer lights for towing holded so firmly to automobile metal surfaces, the lights will not fell off during working. You could also tie them to the trailer with zip ties if you need. Protective label on the base avoid surface scratches. Strong magnet but easy to remove by adult when you don't need them.
  • 2 SIDED TOWING LIGHTS: With 4.25'' red & amber lens, our magnet trailer lights work on both side, red on the back, amber on the front. Our portable trailer lights can be seen in the rear-view mirror, so you could check if they are working when you are driving. 12V wiring easily connect to most automotive electrical systems, great for cargo trailers, boat, ATVs, snowmobiles, and campers.
  • WORK OUT OF BOX: Use our towing lights with no splicing, the only wiring you might to do is on the tow vehicle. Wire distance between lights is 7'/84'', ideal for towing applications up to 80'' wide like trailer, truck, RV etc.. Wire harness length between 4 standard pin male connector and light unit is 20'/240'', easily connect. We offer 4 Quick Splice Wire Terminals for quick spli....
Check Stock

Carrep Submersible Square LED Trailer Lights Kit Waterproof 12V Utility Red LED Stop Turn Tail License Brake Running Light Lamp Under 80' Boat Trailer DOT Compliant

  • Widely Application + DOT Certification⭐ Designed for Trucks, trailers under 80", tractors, semi-trailer, Dump Truck, bus, boat, special vehicle,etc. The LED trailer tail Lights Serves 7 functions: Stop/Turn/Tail/Rear reflector/side reflector/side marker light/ license plate light..
  • All-in-one Kit⭐Trailer tail light kits has everything you need, with 1 Pairs trailer Lights + 2 gaskets + 2 amber clearance lights + one 22 feet and one 4 feet wiring harness + 1 license plate bracket + 4 reflective sticker + some screws..
  • Completely Sealed and Waterproof⭐ No screw on the lamp shade.Submersible Led Trailer Lights's lens and housing are completely welded together, The circuit board of tail light is seal..
  • High Visibility LED⭐ All diodes are LED, NOT Any incandescent bulbs! High Brightness LED Combination tail lights last more 30-40 times than standard incandescent lights.And trailer light kit uses less energy than traditional standard incandescent lights. It saves you time and money..
  • Installation Tips⭐Lamp with license plate light on the left side, the other on the right side. For wiring routing: Please see Product Description or User manual. Gifts for dad men him..
Check Stock

CURT 58082 Trailer-Side 6-Pin Round Wiring Harness Plug with Spring

  • CONVENIENT ATTACHMENT. This 6-pin trailer wiring connector features an extension spring that allows you to attach the plug in a convenient location on your trailer and keep it accessible for plugging in any time.
  • EASY GRIP. Plugging in your trailer wiring and trailer lights is easy with the ergonomic design of this trailer wiring plug. It features tabs on the sides for a better grip when plugging into the vehicle or unplugging.
  • VERSATILE DESIGN. This trailer wiring connector makes a great replacement 6-way wiring plug. It matches industry-standard 6-way round connectors and is commonly used for towing horse trailers, farm trailers, boat trailers and utility trailers.
  • RELIABLE CONNECTION. This 6-way round trailer wiring plug is equipped with a locking tab on top that secures the plug into the socket when inserted. This helps maintain a reliable wiring connection in spite of bumps and vibrations while towing.
  • WEATHER-RESISTANT. To help protect the splice-in wiring connections, this die-cast metal 6-wire trailer plug features concealed terminals, keeping the wires from direct exposure to rain, dirt, road salt and other corrosive threats (wires not included).
Check Stock

Linkitom New Submersible LED Trailer Light Kit Super Bright Brake Stop Turn Tail License Lights for Camper Truck RV Boat Snowmobile Over 80 Inches

  • HALO Trailer Light Kit : Trailer tail light kits has everything you need, includes two stop turn LED tail lights(Unique halo glow and solid light....
  • IP68 Waterproof and Submersible: There is no screw on the lamp shade , the LED trailer lights are completely welded together, The circuit board of....
  • Compliant with DOT approved standards: The lamp shade of utility trailer light kit with corrosion resistant ABS material, 100% compliant with DOT....
  • 25ft wiring harness have more durable than the traditional copper coated aluminum wires and split Y-style color coded harness. Fully operable in....
  • Widely Used: Widely applicable to 80 Inch width tractor, such as truck, trailer, boat, bus, lorry, van, caravan, snowmobile, etc. Please make sure....
Check Stock

LIMICAR Trailer Lights, Upgrade IP68 Halo Glow Trailer Light Kit, Brake Stop Turn Tail License Plate LED Trailer Lights with 25ft Trailer Wiring Harness Kit for Truck Marine RV Boat Camper

  • PREMIUM MATERIAL: Trailer Lights includes 2pcs Rectangular combination stop / brake / reverse / tail / turn signal halo tail lights, 2pcs amber clearance lights, 25ft 4 pin wire harness, license plate bracket and mounting mounting screw, bolt and hardware, 4pcs reflective stickers. The tail lights are made of high quality ABS housing + PC lens, shockproof and dustproof, ensures long lasting durability..
  • PRACTICAL FUNCTIONS: Both of the LED trailer lights used as stop, turn, brake, tail, rear reflector, side reflector and side marker light. Besides, the left light has a license plate illuminator function. "Halo-Glow" design gives a new look for your vehicle. Much brighter and lights faster with lower energy consumption, guarantees super visibility and durability..
  • WATERPROOF RATE: IP68. Effectively protects the light from the invasion and corrosion of sand, dust, dirt, rain, snow, etc. Upgraded lampshade surface without screws, the LED trailer lights are completely welded together, the LED trailer lights are completely welded together. Featured great sealed and waterproof performance..
Check Stock

CZC AUTO 12V LED Submersible Trailer Tail Light Kit for Under 80 Inch Boat Trailer Marine with 18G Pure Copper Wiring Harness Kit (Exclusive Trailer Light kit)

  • CZC AUTO 12V Submersible LED Trailer Light Kit includes 2 combination stop, tail, turn signal lights, two amber LED marker lights ,25-ft wiring harness ,Aluminum license plate bracket instead of plastic license plate for more sturdy, NO bending and Long years lifetime..
  • 18 Gauge 100% pure copper wire harness ensure trailer lights LED do good job underwater! All diodes are LED, NOT Any incandescent bulbs! 100% quality inspection before shipping including photometric inspection. The marine LED trailer lights have super high visibility and Longer Lifetime！The waterproof trailer tail lights comply with DOT FMVSS108 certificate approval.
  • Excellent waterproof/Submersible lights for Boat trailer. Sonic Welding Sealing Technology ensures sealing solidity of the LED tail lights. Every possible gap is sealed well with marine grade glue, such as wires entrance holes and edge of the lens.
  • Application for under 80 Inch width towing vechile,like boat trailer truck snowmobile,etc..
  • CZC AUTO, a reliable brand in trailer lights industry, we offer 30-day money-back for any reason, 12-month warranty for quality-related issues. PlEASE NOTE: Any problem in using our Submersible trailer tail lights, simply contact us, your problem will be solved within 24 HOURS.
Check Stock