Categories

Best Bolt And Sleeve Clamp

6Pcs M3 Duplex Bolt Cable Clamp Duplex Wire Rope Clamp Double Clamp Wire Rope Clamps 304 Stainless Steel Cable Clamps Accessories for Industry Construction Home

  • Material : Made from 304 stainless steel for corrosion resistance and durability, thick material, large bearing capacity..
  • The M3 duplex bolt cable clamp is suitable for 3 mm wire rope..
  • Easy to use : The duplex wire rope clamp is made of bolt bases and nuts, washers , which has stronger locking ability and more stability. Duplex clamp is characterized by simple and practical design and easy to use. When you use it, twist the nut with a wrench on the double chuck, then wind the cable on each side of the bolt, and then use a suitable wrench to tighten the nut..
  • Wide application : Heavy duty wire rope clips is a necessity of our life. Duplex clamp can be used to fix clothesline, sun sail, awning, banner, cable, and can also be widely used in industry, construction, transportation, ship and anchor. For safety, make sure to use the correct number of cable clamps. It is recommended to use 3 duplex clamp at each end to prevent the cable ends from slipping out..
  • Package : You will get 6x M3 double clamp wire rope clamps..
Check Stock

QWORK 2' T-Bolt Hose Clamp Stainless Steel, Working Range 58mm - 65mm for 2' Hose ID, Turbo Intake Intercooler Hose Clamp, 4 Pack

  • High Quality: Made of premium 304 stainless steel, the T-bolt clamp is anti-rust, anti-corrosion, strength and durable for long term use..
  • Specification: T Clamp Range:2.3″-2.7″(57mm-65mm), sutitable for 2″ hose ID..
  • Special Design: The T-bolt clamp features a rounded band edges design for protecting soft hose materials from cuts..
  • Application: The T-bolt hose clamp is suitable for DIY Turbo, Intake system, Intercooler, piping, radiator hoses.
  • 100% Satisfied Service: Enjoy a smooth & frustration free experience with our 100% Satisfied Service in one Month..
Check Stock

QWORK 1.5' T-Bolt Hose Clamp Stainless Steel, Working Range 46mm - 52mm for 1.5' Hose ID, Turbo Intake Intercooler Clamp, 4 Pack

  • High Quality: Made of premium 304 stainless steel, the T-bolt clamp is anti-rust, anti-corrosion, strength and durable for long term use..
  • Specification: T Clamp Range:1.8″-2″(46mm-52mm), suitable for 1.5″ hose ID..
  • Special Design: The T-bolt clamp features a rounded band edges design for protecting soft hose materials from cuts..
  • Application: The T-bolt hose clamp is suitable for DIY Turbo, Intake system, Intercooler, piping, radiator hoses.
  • 100% Satisfied Service: Enjoy a smooth & frustration free experience with our 100% Satisfied Service in one Month..
Check Stock

Cam Action T-Track Quick Release Hold Down Clamp for Jigs, Fixtures & Shop Fences. Ideal for Router and Drill Press Table Fences and Many Shop Built Jigs, Sleds and Fixtures (2, 1/4' Cam Action Clamp)

  • Finally, a quick release clamping system for jigs, fixtures and fences. Spending a lot of time tightening and loosening knobs on your jigs and fixtures? Or maybe your are constantly rotating knobs on your router table or drill press fences..
  • Our exclusive cam clamps will solve your problem and provide you with a quick release clamping system for all of your jigs, fixtures and some fences that rely on a track system. Having a cam clamp on your router table fence makes is so much easier to make quick adjustments and quickly lock the fence in place..
  • The clamp body is made out of aluminum, measures approximately 1-1/2” long and each clamp has a standard 3” long hex head bolt that works with most standard sizes of t-track (depending on which size Cam Action Clamp you purchase). Be sure to get the correct size for your needs. Typically that means you should check to see what size slot or track you would like to use the clamps in..
  • The Cam Action Clamps are available in ¼” 5/16” and 3/8” hex head bolt sizes. Another nice feature of the Cam Action Clamps is that you can swap the bolts out for different situations..
  • For instance, if you have a slot requiring a T-bolt, you can switch out the ¼” hex head bolt with a ¼” T-bolt. Each cam can ex....
Check Stock

Roadformer 2' T-Bolt Hose Clamp - Working Range 56mm - 64mm for 2' Hose ID, Stainless Steel Bolt, Stainless Steel Band Floating Bridge and Nylon Insert Locknut (56mm - 64mm, 2 pack)

  • Roadformer 2" T Bolt hose clamps: 1/4"-28 300-Series SS Bolt, 3/4" Band in 300-Series SS Floating Bridge and Nylon insert locknut.
  • 2" T Clamp Working Range: Diameter 2.2" - 2.52" same as 56mm - 64mm for 2 inch Hose I. D. - not O.D..
  • It’s better to check your Hose OD to fit the working range before purchasing. Roadformer T-Bolt band clamps are designed to provide connections without leaks..
  • High quality T-bolt clamp performance-engineered for long-term durability. T bolt Clamp provides leak-proof connections in a wide variety applications of Industrial, Automotive and Special Equipment.
  • 2 Pieces in package - Roadformer private label products set industry Standard with Premium Quality.
Check Stock

Roadformer 3\ T-Bolt Hose Clamp - Working Range 83mm - 91mm for 3\ Hose ID, Stainless Steel Bolt, Stainless Steel Band Floating Bridge and Nylon Insert Locknut (83mm - 91mm, 2 pack)

  • Roadformer 3" T Bolt hose clamps: 1/4"-28 300-Series SS Bolt, 3/4" Band in 300-Series SS Floating Bridge and Nylon insert locknut.
  • 3" T Hose Clamp Working Range: Diameter 3.27" - 3.58" same as 83mm - 91mm for 3 inch Hose I.D. - not O.D..
  • It’s better to check your Hose OD to fit the working range before purchasing. Roadformer T-Bolt band clamps are designed to provide connections without leaks..
  • High quality T-bolt clamp performance-engineered for long-term durability. T bolt Clamp provides leak-proof connections in a wide variety applications of Industrial, Automotive and Special Equipment.
  • 2 Pieces in Package - Roadformer private label products set industry Standard with Premium Quality.
Check Stock

Roadformer 5' T-Bolt Hose Clamp - Working Range 133mm - 141mm for 5' Hose ID, Stainless Steel Bolt, Stainless Steel Band Floating Bridge and Nylon Insert Locknut (133mm- 141mm, 2 pack)

  • Roadformer 5" T Bolt hose clamps: 1/4"-28 300-Series SS Bolt, 3/4" Band in 300-Series SS Floating Bridge and Nylon insert locknut.
  • 5" T Hose Clamp Working Range Diameter: 5.24" - 5.55" same as 133mm - 141mm for 5 inch Hose I.D. - not O.D..
  • It’s better to check your Hose OD to fit the working range before purchasing. Roadformer T-Bolt band clamps are designed to provide connections without leaks..
  • High quality T-bolt clamp performance-engineered for long-term durability. T bolt Clamp provides leak-proof connections in a wide variety applications of Industrial, Automotive and Special Equipment.
  • 2 Pieces in Package - Roadformer private label products set industry Standard with Premium Quality.
Check Stock

AKIHISA 4 Pack 26-28mm ID Range T-Bolt Hose Clamps 304 Stainless Steel Heavy Duty Adjustable Tube Clamp1 to 1.1 Inch

  • [Clamps Size] T bolt clamp adjustable work range 1.02-1.1" (26mm to 28mm).
  • the screw bolt M6*40mm. to save you time, please carefully check and measure your hose OD to fit working range before purchasing our products..
  • [Premium Material] T bolt hose clamp (including the band, housing and screw) is made of high quality stainless steel-304 with fine polishing treatment, salt resistant, anti rust, anti-corrosion, waterproof, oil-proof, resistant to acid, heat and cold. Makes it more durable, wear - resistant and secure ducting tightly..
  • [Flanging Design] Stainless steel t-bolt clamp is designed to provide a leak-free connection, round arc flanging process of steel belt edge, it could prevent the sharp edges from cutting the pipeline, can protect your tubes better..
  • [Easy to Install] Removable installation, silicone hose clamps can be installed without disconnecting the pipe. High hardness and it is not easy to deform, stainless steel screws, large torque..
  • [Wide Applications] high pressure hose clamp can be used in a wide variety applications of industrial, automotive and special equipment. Fit for fastening various oil, water, gas hose and various hose interfaces..
Check Stock

EVIL ENERGY V Band Clamp with Flange Male Female Stainless Steel 3.0 Inch

  • [Size] Joins 3.0" OD pipe to 3.0" OD pipe. T-Bolt thread size: M8*1.25..
  • [Advantage] V-band clamp is easy to install and remove perfect for applications requiring frequent removals and provide a great seal with even....
  • [Feature] Male female flanges are sealed without gaskets to ensure proper alignment of the flanges inside the clamp for easy installation..
  • [Material] Stainless steel clamp and flanges.
  • [Application] Widely used in exhaust system, turbocharger, downpipe, muffler etc..
Check Stock

Genuine Real Mikuni 34mm Round Slide Left Side Idle Carburetor Carb VM34-168 by Niche Cycle Supply

  • Adapts spigot- (sleeve) mount carbs to flange-mount manifolds.
Check Stock

Floshine 2.5 in Lap Joint Band Clamps,Exhaust Muffler Clamp 4 PCS，2.5 Exhaust Pipe Clamps preformed Stainless Steel

  • Application--2.5" Exhaust clamps are a simple and quick tool for connecting exhaust system components, such as exhaust pipes, mufflers and catalytic Flexible disassembly and assembly methods allow maintenance while protecting the exhaust pipe from being twisted.
  • No welding design--This 2.5 exhaust clamp is tightly fitted 360° to evenly withstand tensile forces and prevent deformation and leakage of the exhaust pipe.No welding design of Lap joint exhaust sleeve clamp makes installation and removal easier and faster.
  • Component parts--304 stainless steel band,steel gasket,aluminum alloy I-block and zinc-plated flange bolt and nut.Make sure that the stainless steel surface is tight against the exhaust pipe and the nut is tightened when installing.
  • Non-rusting and corrosion resistant--Floshine Exhaust clamp is used for 2.5" OD to 2.5" OD exhaust pipe,mffler,catalytic converters connection.Stainless steel material has good corrosion resistance and is not easy to rust, providing a longer service life..
  • WARRANTY--Floshine offers a 5-month warranty and we are committed to enhancing the user experience.Please feel free to contact us with any questions about the product.
Check Stock

Muzata Upgraded Multi Angle Drill Guide Fit 25 30 35 40 45 90 Degree Cable Railing Kit Stair Visible Template Jig 4 Sizes Guide Track for Straight and Angle Hole Wood Post CT19 CT1

  • Various drill bit sizes – This cable railing drill template guide jig offers 4 different sizes of guide tracks(fit 3/16”,9/32”, 5/16”,13/32” drill bits), compatible with most cable railing kit hardware. The hole drilled by 5/16″ drill fit most of 1/8″ cable railings lag screws. The fixing metal sleeve of the desired size can be replaced by adjusting the Jack bolt. The reserved gap between drill bit and metal sleeve can prevent the wear of drill bits and sleeves when drilling.
  • Visible and Portable – The drill guide is made of transparent acrylic with excellent visibility so it is easy and accurate to position on the decking wood post. It is portable and easy to carry. Recommend working with F clamp or C clamp for steadier and safer drilling. Note: Clamps are not included, please search F or C clamp and choose a size larger than 8 inches.
  • Pre-Designed System -We pre-designed a WoodHidden cable railing system to help you construct a hidden wood system, which includes cable railing kit CR26, angled beveled washer CR60, 1/8” wire rope WR02, adhesive sleeve CR66, protector sleeve CR13, drill guide CT19, crimper and cutter CT01, socket wrench CT16. Please note that the package only contains contents as specified in bullet point 1. Oth....
Check Stock

Jersvimc 2Pcs 3 Inch T-Bolt Hose Clamps for Range 83-91mm, Stainless Steel T Clamp Adjustable Turbo Clamps Intercooler Hose Clamp for 3\ ID

  • 1️⃣[ What You Get ]: 2 x t-bolt hose clamp. It is suitable for pipe inner diameter of 3 inch / 76.2mm. The working range of the clamp is 3.27-3.58 inch (83-91mm). In order to ensure a pleasant shopping experience, please take a good measurement before buying to ensure the right size..
  • 2️⃣[ High-quality Material ]: The T Bolt Clamp is made of high-quality 304 stainless steel, which has more advantages than 201 stainless steel on the market. It has anti-rust, anti-corrosion, strong and wear-resistant properties, will not break even if used for a long time, and has a long life..
  • 3️⃣[ Advance Design ]: The t-clamp adopts a design with edges, and the smooth surface can protect the hose material from damage. The design of the self-locking nut prevents loosening during clamping, and has strong torsion resistance and can be disassembled and installed at any time..
  • 4️⃣[ Multi-purpose ]: The stainless steel t-bolt hose clamp is very practical, beautiful in surface, and extremely cost-effective, so it is widely used in a variety of scenarios. For example, Turbo, air intake system, piping items, intercooler, radiator hose, turbocharger and so on..
  • 5️⃣[100% Satisfaction Guarantee]: Jersvimc is committed to bringing a pleasant shopping experience t....
Check Stock