Categories

Best Bolt Cold heading Machine

VEVOR 1.5KW Electric Rebar Bender, 1''(25mm) Hydraulic Electric Hand Held Rebar Bender & Happybuy Electric Rebar Cutter, 1.7KW 110V Electric Hydraulic Rebar Cutter

  • ... satisfy your various bending demands..
  • Product 1: 1500W Pure Copper Coil Motor: This portable rebar bender features a 1500W pure copper coil motor, which can run quietly with low noise and significantly improve your working efficiency, reducing unnecessary wear. Besides, a copper motor can extend this rebar bending machine's operating life to a large extent..
  • Product 1: Sturdy Machine Body & Head: The electric bender machine adopts the sturdy machine body and high-intensity hook, which are stronger and not easy to break. It can stand super-hard rebar with strong clamping force, which can help to reduce steel rebar waste. Multiple screws fixed on the head enforce the stability and sealing..
  • Product 1: Precision Pressure Relief Valve: This hydraulic rebar bender features a precision pressure relief valve and a hydraulic-powered piston for strong thrust and less power consumption. After the steel bar is successfully bent, you can pull the pressure relief valve to move the steel, and the piston will return to its original position..
  • Product 2: Super-Fast Cutting Speed: The electric hydraulic rebar cutter cuts rebar within 3-5.5 seconds without sparks and sentiments. Cutting capacity ranges from 3/20" (4 mm) #3 to 1" (25 mm) #8 Grade 60. It satisfies your va....
Check Stock

M12X80 T-Slot Bolt 20 pcs.

  • Total Size: 18 x 8 x 25.5mm/0.71'' x 0.31'' x 1.00"(WxTxH).
  • Material: T-Bolts are made from high quality carbon steel, surface is plated with chrome-plated for good rust resistance and better performance high hardness and a long service life.
  • Advantage: T-Shaped Bolts are great to have around for use in wet environments, durability and longevity.
  • Application: 4545 Series Aluminum Profile Accessories widely used for building 3D printers, 3D carvers, CNC routers, CNC laser cutters, CNC plasma cutters, machine guards, workstations, etc.
  • Easy to use: Measure and cut your bolt channel groove or use a pre-cut T-track that meets the size of your T bolt head.
  • Once the track has been established, you can easily slide the T bolt into place and use a knob or T nut to tighten and hold the bolt in place (track, knobs, and tee nuts not included).
Check Stock

8-32 x 1-1/2 Hanger Bolt (50 Pieces)

  • HIGH QUALITY STAINLESS: These Oval Head Screws are made of 18-8 (304) Stainless Steel which is one of the highest forms of corrosion resistant metals, making it last longer than other hardware on the market today..
  • SCREWS THAT YOU CAN DEPEND ON: Our Oval Head Machine Screws are very strong and are great for both indoor and outdoor use. This stainless is superior to regular steel and provides excellent rust resistance..
  • GREAT TO KEEP AROUND: Bolt Dropper stainless hardware is great to have around for use in wood and wet environments. Bolt Dropper hardware is the highest quality available on the market and we stand by our claim 100%. They are strong, corrosion resistant and will support all of your projects..
  • DIMENSIONS: Diameter: #8| Length: 7/8 | Threads per Inch: 32 | Thread Type: Coarse (standard) | Quantity: 100 pcs | Material: 18-8 (304) Stainless Steel.
  • LIFETIME GUARANTEE: We are so confident that our product is the best on the market that we offer a NO HASSLE LIFETIME GUARANTEE..
Check Stock

1/4 -20 X 3 Stainless Phillips Truss Head Machine Screw 25pc Coarse Thread 18-8 304 Stainless Steel by Bolt Dropper

  • 【100% Solid Stainless Steel】These Truss Head Screws are made of 18-8 (304) Stainless Steel which is one of the highest forms of....
  • 【Screws That You Can Depend On】Our Truss Head Machine Screws are very strong and are great for both indoor and outdoor use. This stainless is....
  • 【Great To Keep Around】Bolt Dropper stainless hardware is great to have around for use in wet environments. Bolt Dropper hardware is the highest....
  • 【Dimensions】Diameter: 1/4" | Length: 3" | Threads per Inch: 20 | Thread Type: Coarse | Quantity: 25 pcs | Material: 18-8 (304) Stainless Steel..
  • 【Lifetime Guarantee】We are so confident that our product is the best on the market that we offer a No Hassle Lifetime Guarantee..
Check Stock

K Kwokker 651Pcs #8-32#6-32#2-1/2 Machine Screw Phillips Pan Head Set Screws Assorted Nuts and Bolts and Washers, Cabinet Door and Drawer Screws

  • √ [More US Models, K Kwokker Phillips Round Head Machine Screws, More to Meet Your Various Needs] Slotted/Phillips Combo. Diameter thread size: #8-32, #6-32, #2-1/2. Thread coverage: full thread.
  • √ [More Quantity, More Economical, 651Pcs Truss Head Machine Screws, Bolts Nuts and Washer Assortment Kit] Includes: A.8-32 machine screw: Screw: 25pcs 8-32*1 1/2″, 25pcs 8-32*3/4″, 25pcs 8-32*1/2″, 100pcs flat washers, 100pcs nuts.
  • B. 6-32 machine screws: Screw: 25pcs 6-32*1 1/2″, 25pcs 6-32*3/4″, 25pcs 6-32*1/2″, 100pcs flat washers, 100pcs nuts.
  • √ [Reliable Zinc-Plated Steel. More Than 20 Years of Experience in Fastener Tool Production] Knob and Pull machine screws are zinc-plated steel construction. Zinc-Plated Truss Head Combo Drive Cabinet and Knob Screws will provide durability and corrosion resistance..
  • [Purpose] Assorted nuts and bolts suitable for common project applications: renovation, fence, storage, cabinet, frame and DIY projects. Commonly used in machinery and electrical appliances. Connect the knob or knob to the surface of the cabinet door or drawer..
  • √ [Come With A High Hardness Storage Box, Easy To ....
Check Stock

HORUSDY 28-Piece Heavy Duty Punch and Chisel Set Including Taper Punch Cold Chisels Pin Punch Center Punch

  • Available in 28 different shapes and designs, including: bolt hole alignment, ball head separation, unfolding knuckle, center punch, knockout bolts and pins..
  • Product material: made of chrome vanadium steel, hardness: 54~58HRC, Heat treated chromium vanadium provides a high hardness rating that prevents rapid expansion of the head and passivation of the chisel and punch..
  • 16PC Chromium Vanadium Steel：punch and chisel set comes with 16-pc. chrome vanadium punch and chisel set, 5-pc. pin punches, 5-pc. taper punch, 3-pc. cold chisel, 2-pc. center punch and chisel punch gauge..
  • 12PC High Carbon Steel：6PC cold chisel set, 4PC pin punch set and 2PC center punch..
  • It is equipped with a special storage bag for easy carrying..
Check Stock

10 PCS M14-2.0x45 MM Metric Hex Flange Bolts Grade 10.9 Screws Phos & Oil

  • Package Contents：5 sets, each include one hex bolt, hex nut, flat washer and lock washer.
  • Screw Length: 5" or 125mm (measured from under the head).
  • Made of 304 Stainless Steel (no coating outside) which is superior to regular steel and any zinc plated fasteners, provides good strength and corrosion resistance in bad environments.
Check Stock

Peck Slither and Slide

  • Compatible with deck heights of 53 to 60 inches.
  • Mounting lumber not included - Required 5/8 x 3/8 x 20 3/8 inches.
  • Mounting hardware not included - Rounded Head 5/16” Bolt x 1 ¼” long with flat washers and a locking nut (Truss head, Carriage bolt, Pan head bolt would all work. ).
  • One-piece construction for easy assembly.
  • Shipping dimensions -118” x 17” x 26”.
  • Limited Lifetime against cracking and fading.
  • Engineered to meet or exceed ASTM standards (code F1148-19) for intended use in private residential settings. is applicable for intended use only..
Check Stock

Rogue Rocketeer Electric Guitar Blue

  • Model name: Rogue Rocketeer electric guitar Body: double-cutaway paulownia Neck: bolt-on maple with "C" shape Scale length: 25-1/2"(648 mm) Fingerboard: rosewood No. of frets: 22 Width at nut: 1.69" (43 mm) Pickups: 2 single-coil and one humbucking Controls: master volume, master tone, 5-position blade switch Bridge: tremolo Machine heads: chrome-plated die-cast tuning machines Hardware: chrome.
  • The Rogue Rocketeer electric guitar has a double-cutaway body made of solid paulownia, and a bolt-on maple neck with a 22-fret rosewood fretboard.
  • 2 single-coil pickups and one humbucking pickup offer a wide variety of tones to choose from.
  • The Rogue Rocketeer's tremolo bridge lets beginning guitarists get creative with their playing.
  • Equipped with rockin' features, the Rogue Rocketeer is a fun and affordable electric guitar to get you started.
Check Stock

Backyard Discovery 10 Foot Wave Slide, Easy One Piece Installation, Yellow

  • 10' (118" actual length) Wave slide is compatible with deck heights of 53 to 60 inches high.
  • Age Range: 3 to 10 - Supports up to 250lbs.
  • Super deep wave slide (actual depth is 10") ensures children remain safe while sliding.
  • Mounting lumber not included - Recommended 5/8 x 1 3/8 x 20 3/8 inches.
  • Mounting hardware not included - Recommended rounded head 5/16” bolt with flat washers and a locking nut (Truss head, Carriage bolt, Pan head bolt would all work.).
  • Strong one piece construction with 3 bolt installation.
  • Limited Lifetime Warranty against cracking and fading.
  • Engineered to meet or exceed ASTM standards (code F1148-19) for intended use in private residential settings. Warranty is applicable for intended use only..
  • Assembled dimensions-118" x 23.5" x 18" - Shipping dimensions -118” x 17” x 26”.
Check Stock

Bolt Covers Engine Kit Motor Primary Bolts Head Caps Aluminum for Touring Road King Street Glide 2017-2021 Softail Twin Cam 2018-21 (Pack of 62)

  • Condition: 100% Brand New. Material: Aluminum,stainless steel.3 sizes bolt head caps.Part Number:2464..
  • Fitment: Fits For Harley 2017-2021 Touring Electra Glides, Road Glides, Road Kings, Street Glides,Trikes & 2018-2021 Softails models.(Engine Kit for Milwaukee 8 ).
  • Attention:May not included every include all engine/motor/transmission/primary and select chassis bolt covers.Individual covers are available for a wide variety of bolt and nut styles..
  • Beautifully designed caps to cover the raw bolt heads on your engine, transmission, primary etc..Please double check the size and quantity before..
  • Packaged:46 pcs caps fit 7.5mm-10mm bolt./ 10 pcs caps fit 9mm-12mm bolt./ 6 pcs caps fit 11mm-14.6mm bolt..
Check Stock

#8-32 X 3' Stainless Pan Head Phillips Machine Screw (25 pc) 18-8 (304) Stainless Steel Screws by Bolt Dropper

  • ã€High Quality Stainless】These Pan Head Screws are made of 18-8 (304) Stainless Steel which is one of the highest forms of corrosion resistant metals, making it last longer than other hardware on the market today..
  • ã€Screws That You Can Depend On】Our Pan Head Machine Screws are very strong and are great for both indoor and outdoor use. This stainless is superior to regular steel and provides excellent rust resistance..
  • ã€Great To Keep Around】Bolt Dropper stainless hardware is great to have around for use in wood and wet environments. Bolt Dropper hardware is the highest quality available on the market and we stand by our claim 100%. They are strong, corrosion-resistant, and will support all of your projects..
  • ã€Dimensions】 Diameter: #8 | Length: 3" | Threads per Inch: 32 | Thread Type: Coarse (standard) | Quantity: 25 pcs | Coating: Stainless Steel | Material: 18-8 (304) Stainless Steel..
  • ã€Lifetime Guarantee】We are so confident that our product is the best on the market that we offer a No Hassle Lifetime Guarantee..
Check Stock

Edelbrock 2181 Performer Intake Manifold

  • Delivers improved throttle response over stock intakes and are available in both EGR and non-EGR styles.
  • When using a 12-bolt manifold on 16-bolt heads, 16-bolt intake gasket is used to ensure proper sealing around the water ports on the heads.
  • Factory composition-type embossed gasket also works satisfactorily.
  • Boosts torque over a wide RPM range, from idle to 5, 500 RPM.
Check Stock