Categories

Best Bolt Headers

Remflex 8053 OBX Exhaust Header Connector Gasket Set of 2 Model 8053 Car & Vehicle Accessories / Parts

  • 1-3/4 inch pipe, header tube connector flange, 4-into-2/2-into-1.
  • Bolt hole spacing: (A) 4-5/8 inch x (B) 3-1/4 inch.
  • There are no rubber binders or composite materials in Remflex exhaust gaskets so they will not.
  • Remflex exhaust gaskets come in a standard 1/8 Inch thickness and are designed to crush 50 percent.
Check Stock

Remflex (8053) OBX Exhaust Header Connector Gasket, (Set of 2)

  • 1-3/4 inch pipe, header tube connector flange, 4-into-2/2-into-1.
  • Bolt hole spacing: (A) 4-5/8 inch x (B) 3-1/4 inch.
  • There are no rubber binders or composite materials in Remflex exhaust gaskets so they will not shrink or harden due to time or temperature eliminating the need to go back and continually retighten the flange bolts.
  • Remflex exhaust gaskets come in a standard 1/8 Inch thickness and are designed to crush 50 percent allowing them to fill any pits or gaps in the flange surface up to 1/16 Inch.
Check Stock

ARP 100-1110 1001110 Header Bolts With Hex Style Heads, Chrome Moly Steel With Black Oxide Finish, Set Of 16

  • Premium grade bolt kit to facilitate installation of exhaust headers.
  • Rated at 170,000 PSI, which is considerably stronger than Grade 8 hardware.
  • Bolts are 3/8" in diameter and have a 1.000 under head length.
  • Manufactured from black oxide finished chrome moly steel.
  • Heads are traditional hex style, and premium-quality washers are included.
Check Stock

Improved Racing EGM-106 Low-Profile Oil Cooler Adapter for GM LS Engines, 10AN

  • 100% bolt-on unit replaces the factory oil bypass cover, just above the oil filter, and makes for easy installation of an oil cooler on any rear sump GM LS family engine. No oil filter relocation is required.
  • Slim design provides maximum clearance for aftermarket headers.
  • Features two 1/8” NPT ports for oil sensors or a turbo oil supply line.
  • 6061-T6 billet aluminum construction and black anodized finish. Female -8AN O-ring boss threads. Includes two black anodized aluminum fittings with Viton O-rings for -10AN lines.
  • Made in USA. Lifetime manufacturer's warranty.
Check Stock

BBK 40140 1-5/8 Silver Ceramic Coated Shorty Tuned-Length Exhaust Header for Dodge Truck

  • BBK is your Number One Aftermarket Performance Exhaust Brand in the USA - American Designed and Built.
  • BBK Exhaust is Built with CNC Mandrel Bent Tubing for 35% Increased Flow Over Stock to Add 10-15 Horespower and Improve Torque and Performance.
  • Aircraft Quality Construction, Heavy Gauge 1-5/8" Tubing, 3/8" Laser Cut Flanges, Large Bore Patented Designed Collectors and Custom Precision Hand....
  • Direct "Perfect" Fit Replacement Exhaust includes All New Gaskets and Hardware and Offers Improved Performance and Sound Over Restrictive Stock....
  • Bolt on 14-18 HP with these BBK Shorty Tuned Length Exhaust Headers Fit all 2009-2011 Dodge Hemi Ram Truck 5.7L Applications - Polished Silver Ceramic....
Check Stock

SHARKROAD Black 3.0 Exhaust Slip-on Pipes for Harley 2014-Up Sportster Muffler Upgrading,Such as Iron 883 Exhaust, Sportster 1200

  • ✅【GREAT FITMENT ON TOURING】Fit 2017-2023 Harley Touring Models (Include Street Glide,Electra Glide,Road Glide,Road King,Ultra Classic, DON'T FIT TRI-GLIDE).
  • ✅【FIT OEM HEADERS】Only fit 2017-2023 Harley Davidson Touring stock & aftermarket OEM style headers (O.D: 1.75 + 2.5 inch), Not for other diameter headers. Please kindly contact us to avoid any inconvenience..
  • ✅【100% CUSTOMER SATISFACTION】24/7 Customer Service for any questions from you.100% Refund if you don’t like the product..
Check Stock

The Dog of Discord

  • Provides a true-roll that helps master passing and receiving on ground.
  • Maximize reps by trapping the ball out of the air with your feet, thighs and chest.
  • Work on volleys and half volleys with instep and laces.
  • Shoots ball into the air for downward offensive headers and defensive headers up and away.
Check Stock

ASHLEY PRODUCTIONS Months of The Year Die-Cut Magnets

  • Organize your classroom or home with our magnetic chalkboard style column headers..
  • Use these pre-printed time savers for DIY calendars on whiteboards, steel lockers, refrigerators, and more..
  • Die-cut headers easily punch out from 8.5" x 11" sheet..
  • Includes 12 pieces per pack, 1 header per month..
Check Stock

SparkFun Compatible with Arduino Pro Mini Starter Kit - 5V/16MHz - Comes to get a Project Started

  • The Pro Mini is SparkFun's minimal design approach to Arduino running at 5V with a 16MHz bootloader. Does not come with connectors populated so that you can solder in any connector or wire with any orientation you need..
  • Includes: Compatible with Arduino Pro Mini 328 - 5V/16MHz, FTDI Basic Breakout - 5V, Breadboard - Mini Modular (White), USB Mini-B Cable - 6".
  • Also includes: Break Away Headers - Straight (40-pin), Jumper Wires Premium 4" M/M (30 pack), LED - Basic Red 3mm, LED - Basic Green 3mm, 2x Resistor 330 Ohm 1/6th Watt PTH, Break Away Headers - Right Angle (6-pin), 2x Female Headers (2-pin).
  • Pro Mini Features: ATmega328 running at 16MHz with external resonator (0.5% tolerance), 0.8mm Thin PCB, USB connection off board, Supports auto-reset, 5V regulator.
  • Pro Mini Features: Max 150mA output, Over current protected, Weighs less than 2 grams! DC input 5V up to 12V, On board Power and Status LEDs, Analog Pins: 8 Digital I/Os: 14, 0.7x1.3" (18x33mm).
Check Stock

ASUS ROG Maximus X Code LGA1151 (Intel 8th Gen) DDR4 DP HDMI M.2 Z370 ATX Gaming Motherboard with onboard 802.11AC WiFi and USB 3.1 Gen 2

  • Designed exclusively for 8th generation Intel Core processors to maximize connectivity and speed.
  • 5-Way Optimization with Auto-Tuning and FanXpert 4 automatically tailors overclocking profiles to your unique build for maximum OC performance and dynamic system cooling.
  • Dedicated water cooling headers allow monitoring of water temperature and flow without a dedicated standalone controller.
  • Unmatched Personalization with ASUS exclusive AURA Sync RGB lighting, additional RGB headers, and addressable RGB headers for all AURA sync enabled products.
  • Industry-leading 8-channel HD audio with dual headphone amplifiers and ROG exclusive SupremeFX S1220 CODEC driven by Japanese capacitors.
Check Stock

AITRIP 2PCS Type-C USB CH340 5V 16MHz for Nano Board CH340/ATmega+328P , Type-C Connection Compatible with Arduino Nano V3.0

  • The Nano can be powered via the Type-C USB connection, 7-12V unregulated external power supply (pin 30), or 5V regulated external power supply (pin 27). The power source is automatically selected to the highest voltage source..
  • Support for external 5V~12V DC power supply, Support power supply by 9V battery..
  • The Nano is using the chips ATmega328P and CH340, Replace FT232RL.
  • The Nano-C is breadboard-friendly and can be powered by USB, regulated 5V supply or unregulated 7-12V source. Connectors shipped unsoldered to fit the smallest of spaces.
  • Comes with 2packs of Nano V3.0 Micro Controller Module, each Nano V3.0 Micro Controller module is equipped with 3pcs pin headers (2pcs 15pin headers +1pcs 6pin headers), no welding needed..
Check Stock

Monster Moving Supplies Mt10001 Wood 4-wheel Piano H Dolly

  • Rubber belting cover is glued & stapled to the wood supports.
  • Swivel casters with 4 inch nonmarking wheels.
  • Rubber Belting Cover Is Glued and Stapled To The Wood Supports.
  • Swivel Casters with 4-Inch Non-marking P.u. Wheels.
Check Stock

AITRIP 3pcs for Arduino Mini Nano V3.0 ATmega328P 5V 16M Micro Controller Board Module with 3pcs USB Cable Compatible with Arduino IDE

  • *The Nano is using the chips ATmega328P and CH340, Replace FT232RL..
  • *It is a smallest, complete, and breadboard friendly board. It has everything that Diecimila/Duemilanove has (electrically) with more analog input pins and onboard +5V AREF jumper..
  • *Nano's got the breadboard-ability of the Boarduino and the Mini+USB with smaller footprint than either, so users have more breadboard space. It's got a pin layout that works well with the Mini or the Basic Stamp (TX, RX, ATN, GND on one top, power and ground on the other)..
  • *The Nano can be powered via the Mini-B USB connection, 7-12V unregulated external power supply (pin 30), or 5V regulated external power supply (pin 27). The power source is automatically selected to the highest voltage source..
  • *Arduino Nano V3.0 ATMEGA328P Improved version with 3pcs pin headers (2pcs 15pin headers +1pcs 6pin headers)..
Check Stock