Peck Slither and Slide

  • Compatible with deck heights of 53 to 60 inches.
  • Mounting lumber not included - Required 5/8 x 3/8 x 20 3/8 inches.
  • Mounting hardware not included - Rounded Head 5/16” Bolt x 1 ¼” long with flat washers and a locking nut (Truss head, Carriage bolt, Pan head bolt would all work. ).
  • One-piece construction for easy assembly.
  • Shipping dimensions -118” x 17” x 26”.
  • Limited Lifetime against cracking and fading.
  • Engineered to meet or exceed ASTM standards (code F1148-19) for intended use in private residential settings. is applicable for intended use only..
Check Stock

Epiphone Special-II GT Electric Guitar Worn Black

  • "Neck Joint: Bolt-on, contoured heel with recessed 4-bolt pattern".
Check Stock

Backyard Discovery 10 Foot Wave Slide, Easy One Piece Installation, Green

  • Compatible with deck heights of 53 to 60 inches.
  • Mounting lumber not included - Required 5/8 x 3/8 x 20 3/8 inches.
  • Mounting hardware not included - Rounded Head 5/16” Bolt x 1 ¼” long with flat washers and a locking nut (Truss head, Carriage bolt, Pan head bolt would all work. ).
  • One-piece construction for easy assembly.
  • Shipping dimensions -118” x 17” x 26”.
  • Limited Lifetime against cracking and fading.
  • Engineered to meet or exceed ASTM standards (code F1148-19) for intended use in private residential settings. is applicable for intended use only..
Check Stock

Backyard Discovery 10 Foot Wave Slide, Easy One Piece Installation, Yellow

  • 10' (118" actual length) Wave slide is compatible with deck heights of 53 to 60 inches high.
  • Age Range: 3 to 10 - Supports up to 250lbs.
  • Super deep wave slide (actual depth is 10") ensures children remain safe while sliding.
  • Mounting lumber not included - Recommended 5/8 x 1 3/8 x 20 3/8 inches.
  • Mounting hardware not included - Recommended rounded head 5/16” bolt with flat washers and a locking nut (Truss head, Carriage bolt, Pan head bolt would all work.).
  • Strong one piece construction with 3 bolt installation.
  • Limited Lifetime Warranty against cracking and fading.
  • Engineered to meet or exceed ASTM standards (code F1148-19) for intended use in private residential settings. Warranty is applicable for intended use only..
  • Assembled dimensions-118" x 23.5" x 18" - Shipping dimensions -118” x 17” x 26”.
Check Stock

Aluminum Truss Arch Kit 9.7ft Wide 8.1ft High Portable DJ Lighting System Bolts

  • The 100% aluminum truss kit is the perfect lightweight, strong, and durable lighting arch trussing system! Featuring ultra strong and lightweight....
  • Features: 660 LB. weight capacity evenly distributed. All parts bolt together, NO HAMMER NECESSARY like standard spigot type trussing.
  • 8" width trussing. 1.25" diameter tubing. Ultra strong industrial grade 100% aluminum build for indoor/outdoor use.
  • System includes: Three (3) 2 Meter (6.56 ft.) aluminum truss sections, Two Corner sections, Two 11"x39" aluminum base plates.
Check Stock

Sonata No 8 for Flute and Piano in G-Sharp Major I Allegro moderato

  • 5/16-18 Steel Zinc-plated One Way Bolt and Cast Aluminum Security Nut.
  • INCLUDES: 2 One-Way Truss Head Bolts and 2 Security Breakaway Nuts.
  • Tamper Resistant Bolt and Nut Makes It difficult But Not Impossible To Remove.
  • Great For Mounting Signs On Any Standard U-Channel Post.
Check Stock

binifiMux 220pcs M4 x 5mm/ 6mm/ 8mm/ 10mm/ 12/ 16mm/ 20mm/ 25mm 304 Stainless Steel Round Pan Head Phillips Machine Screws and Hex Nuts Kit

  • 【100% Solid Stainless Steel】These Truss Head Screws are made of 18-8 (304) Stainless Steel which is one of the highest forms of corrosion-resistant metals, making it last longer than other hardware on the market today..
  • 【Screws That You Can Depend On】Our Truss Head Machine Screws are very strong and are great for both indoor and outdoor use. This stainless is superior to regular steel and provides excellent rust resistance..
  • 【Great To Keep Around】Bolt Dropper stainless hardware is great to have around for use in wet environments. Bolt Dropper hardware is the highest quality available on the market and we stand by our claim 100%. They are strong, corrosion-resistant, and will support all of your projects..
  • 【Dimensions】Diameter: #10 | Length: 1-1/4" | Threads per Inch: 32 | Thread Type: Fine | Quantity: 25 pcs | Material: 18-8 (304) Stainless Steel..
  • 【Lifetime Guarantee】We are so confident that our product is the best on the market that we offer a No Hassle Lifetime Guarantee..
Check Stock

Glesam Ladder Stabilizer Accessory for Roof Gutter, Wing Span/Wall Ladder Standoff, 375 lbs Weight Rating

  • SUPERIOR BUILD: This ladder stabilizer is made of superior quality with an elegant design and smooth finish..
  • ADJUSTS TO YOUR LADDER: The stabilizer ladder standoff measures 37"L x 15.15" W x 15.25" H..
  • EASY TO USE: Easily attaches with U bolt and Installation instruction..
  • Props up your ladder around rain gutters and more, so you can work around obstacles..
  • Adds stability when working in the extension position..
Check Stock

Heavy Duty Ladder Hook with Wheel Securing The Ladder to Roof Ridge Roof Edge Extension with Fixed Wheel & Swivel Bar(Pack of 2)

  • Hook Ladder and Roof Tightly: An ideal safer method to hook the ladder to the roof ridge tightly, more convenient, and safer checking the roof with this ladder hook..
  • Durable Material: Made of heavy-duty steel with water and rust-proof finish, Each ladder hook has 300 pounds bearing capacity, moreover the universal wheel makes it easier to slip the stair onto the roof, saving labor and time..
  • Thirdly, slide the ladder to the roof and fix it on the ridge of the roof, all in one minute.
  • The Werner ladder may need to modify for better fitting..
  • Compatibility: Fit for the ladders with rung clearance of 11’’ to 13.5’’.
  • Compatible with wood, fiberglass, or aluminum ladders.
  • Always install two ladder hooks per ladder, and roofs with vented ridges are not recommended to use.
  • NOTE: Please bolt or tie the two sections together of the extension ladder or just use it on the one section of the extension ladder when you use this product on your extension ladder..
  • What You Get: 1 set of Roof Ladder Hooks.
  • Welcome to contact us if you have any questions.
Check Stock

VITCIK Full Fairings Bolt Screw Kits for Kawasaki EX250R Ninja 250 EX-250R ZX250R 2008 2009 2010 2011 2012 Motorcycle Fastener CNC Aluminium Clips (Red & Silver)

  • FASTER SHIPPING: We will ship them within 24 hours. Normally it will take 3-10 business days for delivery (usually 5 days according to the delivery record).
  • Fasteners Bolt Kit Screws Fit For: Kawasaki EX250R Ninja 250 EX-250R ZX250R 2008 2009 2010 2011 2012..
  • Complete Fairing Bolt Kit Includes: Bolt Socket Screw(20+20+20+6+6 pieces) + Truss Screw(10+10 pieces) + Retainer(4+4+2 pieces) + Washer(60 pieces) + Speed Nut(10 pieces) + Lock Nut(40+20 pieces) + LIFETIME friendly customer service..
  • Total quantity of parts included in this kit is 232 pieces..
  • Full fairing bolt kit which contains all the hardware that is needed for the replacement of windscreen and main fairing pieces (front nose fairing, left/right fairing, front tire fender, tail fairing, v-panels, etc), whether the original or aftermarket ones..
Check Stock

VEVOR Rack Ratchet (2\ OD Round Pipe)

  • Effortless Installation: The ladder rack ratchet can be either bolted or welded. It is complete with bolt mounting hardwaret. 2 Inches OD round pipe steel..
  • Thoughtful Design: The rubber pad reduces friction between the machine and the ladder rack ratchet strap, which reduces damage to the machine surface. Widen the diameter of the handwheel to save more effort, tighten forward and lock backward..
  • Ratchet Tie Down: The rack ratchet with strap adopts a smooth ratchet structure, which is used for one-way drive and is commonly used in manual winches to prevent reversal. The ladder rack ratchet is made of alloy steel with a 1,000 lbs capacity for high durability..
  • 9" Polyester Strap: The ladder rack tie-down straps are equipped with an extended ribbon to increase cargo the loading range of cargo volume. The length of the strap is similar to that of the same product. Strap length: 9 ft / 274 cm..
  • Wide Application: Ladder tie-down straps are used for ladder racks and truck racks. Perfect for tying down cargo and lumber. The frame can be welded or bolted onto the rack. It is suitable for a variety of mounting styles, ideal for almost any rack..
Check Stock

3M DBI-SALA 2103670 U-Bolt Roof Anchor (Permanent), Fits Up To 2X8, Silver

  • Makes attaching to the anchorage structure simple, fast and easy for added worker satisfaction and productivity.
  • Specialized fall protection system for residential or commercial wood frame structures keeps you safe and secure.
  • Everything required to install is included, simply place U-bolt over roof truss and install and tighten the bolts and clamp.
  • Provides a tie-off point for the contractor during construction, and also the homeowner for future maintenance of the roof.
  • Permanent U-bolt roof anchor with integral D-ring, flashing and cap, fits up to 2x8 roof member.
Check Stock

SG SPECIAL VE VINTAGE WORN CHERRY

  • Body Body shape: Single cutaway Body type: Solid body Body material: Solid wood Top wood: Not applicable Body wood: Poplar Body finish: Satin Orientation: Right handed Neck Neck shape: '60s SlimTaper D Neck wood: Mahogany Joint: Bolt-on Scale length: 24.75 in. Truss rod: Standard Neck finish: Satin Fretboard Material: Rosewood Radius: 14 in. Fret size: Medium jumbo Number of frets: 22 .
Check Stock