Categories

Best Bolt On Stub Axle

The ROP Shop Pack of 4 Trailer Axle Kits with 4 on 4 Bolt Idler Hub & 1 Round BT8 Spindle

  • Replacement (Pack of 4) Trailer Axle Kits with 4 on 4" Bolt Idler Hub & 1" Round BT8 Spindle.
  • Specs - 1,250 lb Hub Capacity, Used On 2,000 lb Axle Shaft 1 Diameter: 1 1/4" Shaft 2 Diameter: 1" Shaft Length: 8 3/4" (4" Long Stub) Hub A Diameter.: 2 1/2" Hub B Diameter: 5 1/2" Bolt Pattern: 4". Refer to images 2 & 3 for more information.
  • Includes - (4) Idler Hub with Lug Nuts, (4) 1" BT8 Round Spindle with Castle Nut, Pin & Washer, (8) Inner/Outer Bearings, (4) Double-lip Grease Seal (1 1/4" I.D. / 2" O.D.), (4) 2" Grease/Dust Cap.
  • Assembly with 4 on 4" bolt idler hub & 1" round BT8 spindle. Rated to 1,250 lbs. each or 2,000 lbs. for the pair.
  • Fits 2,000 pound trailer axles with straight spindles, but to know if this hub is the right fit for your setup you would want to check the size your current bearings and make sure that they match up with the 1" bearings that these hubs come with as well as knowing that you have a standard length spindle. This Hub fits standard length spindles, not "short spindles".
Check Stock

The ROP Shop (Pack of 2) Trailer Axle Kits with 4 on 4" Bolt Idler Hub & 1" Round BT8 Spindle

  • Replacement (Pack of 2) Trailer Axle Kits with 4 on 4" Bolt Idler Hub & 1" Round BT8 Spindle.
  • Specs - 1,250 lb Hub Capacity, Used On 2,000 lb Axle Shaft 1 Diameter: 1 1/4" Shaft 2 Diameter: 1" Shaft Length: 8 3/4" (4" Long Stub) Hub A Diameter.: 2 1/2" Hub B Diameter: 5 1/2" Bolt Pattern: 4". Refer to images 2 & 3 for more information.
  • Includes - (2) Idler Hub with Lug Nuts, (2) 1" BT8 Round Spindle with Castle Nut, Pin & Washer, (4) Inner/Outer Bearings, (2) Double-lip Grease Seal (1 1/4" I.D. / 2" O.D.), (2) 2" Grease/Dust Cap.
  • Assembly with 4 on 4" bolt idler hub & 1" round BT8 spindle. Rated to 1,250 lbs. each or 2,000 lbs. for the pair.
  • Fits 2,000 pound trailer axles with straight spindles, but to know if this hub is the right fit for your setup you would want to check the size your current bearings and make sure that they match up with the 1" bearings that these hubs come with as well as knowing that you have a standard length spindle. This Hub fits standard length spindles, not "short spindles".
Check Stock

The ROP Shop (Pack of 8) Trailer Axle Kits with 4 on 4" Bolt Idler Hub & 1" Round BT8 Spindle

  • Replacement (Pack of 8) Trailer Axle Kits with 4 on 4" Bolt Idler Hub & 1" Round BT8 Spindle.
  • Specs - 1,250 lb Hub Capacity, Used On 2,000 lb Axle Shaft 1 Diameter: 1 1/4" Shaft 2 Diameter: 1" Shaft Length: 8 3/4" (4" Long Stub) Hub A Diameter.: 2 1/2" Hub B Diameter: 5 1/2" Bolt Pattern: 4". Refer to images 2 & 3 for more information.
  • Includes - (8) Idler Hub with Lug Nuts, (8) 1" BT8 Round Spindle with Castle Nut, Pin & Washer, (16) Inner/Outer Bearings, (8) Double-lip Grease Seal (1 1/4" I.D. / 2" O.D.), (8) 2" Grease/Dust Cap.
  • Assembly with 4 on 4" bolt idler hub & 1" round BT8 spindle. Rated to 1,250 lbs. each or 2,000 lbs. for the pair.
  • Fits 2,000 pound trailer axles with straight spindles, but to know if this hub is the right fit for your setup you would want to check the size your current bearings and make sure that they match up with the 1" bearings that these hubs come with as well as knowing that you have a standard length spindle. This Hub fits standard length spindles, not "short spindles".
Check Stock

ShareGoo Stainless Steel 08029 Dogbones 89.5mm Drive Shaft & 02033 Stub Wheel Axle Compatible with Redcat Volcano Epx/Pro HSP Exceed 1/10 RC Car Truck Replacement

  • The stub wheel axle & dogbone compatible with Redcat Racing Tsunami (nitro), Tsunami EPX, Volcano Epx/epx PRO, Volcano STX HSP Exceed 1/10 rc car truck.
  • Made of high quality steel,durable in use..
  • Package includes:4Pcs 89.5mm Steel Dogbones and 4Pcs Stub Wheel Axle..
Check Stock

CODA RACING RC Alloy Caster Block&Steering Blocks&Rear Stub Axle Carriers for Traxxas 1/10 2WD Slash, Stampede, Rustler, Nitro Slash-Replaces Part 3736 3632 3752

  • Easy upgrade replace Traxxas stock part #3632 Caster blocks，#3736 Steering blocks,#3752 Stub axle carriers.
  • Fits: Traxxas 1/10 Slash 2WD ,1/10 Stampede 2WD,1/10 Rustler 2WD,1/10 Ford F-150 Raptor,1/10 Nitro Slash 2WD,Bigfoot 2WD.
  • Precision CNC machined,Anodized 6061-T6 aluminum for lightweight and durable performance..
  • Includes Caster blocks&Steering blocks(L/R),Stub axle carriers(L/R),5x11x4mm bearings(8),PTFE washers(8),Suspension Screw Pins(6),Screws(2),Washers(4).
Check Stock

CODA RACING RC Alloy Caster Block&Steering Blocks&Rear Stub Axle Carriers for Traxxas 1/10 4X4 Slash Stampede Rustler 4WD -Replaces Part 6837 6832 1952

  • Easy upgrade replace Traxxas stock part #6832 Caster blocks(c-hubs)，#6837 Steering blocks,#1952 Stub axle carriers.
  • Fits: Traxxas 1/10 Slash 4X4 ,1/10 Stampede 4X4,1/10 Rustler 4X4,1/10 Slash 4X4 VXL Ultimate Platinum,1/10 Stampede 4X4 VXL,1/10 Rustler 4X4 VXL.ST....
  • Precision CNC machined,Anodized 6061-T6 aluminum for lightweight and durable performance..
  • Includes Caster blocks&Steering blocks(L/R),Stub axle carriers(L/R),5x11x4mm bearings(2),10x15x4mm bearings(6),Bushing Sleeves(4),Screws(6),PTFE....
Check Stock

AMOGOT RC Alloy Front Caster Block Steering Blocks Rear Stub Axle Carriers kit with Ball Bearings for 1/10 RC 2WD Slash Stampede Rustler Replace 3632 3736 3752 Upgrade Parts Red

  • 【Suit for 】Compatible with 1/10 RC Slash 2WD, Stampede 2WD, Stampede VXL, Slash VXL, Rustler 2WD, Rustler VXL, Ford F-150 Raptor RC Cars Trucks.
  • 【Material】: Made of High quality aluminum alloy,Lightweight and Durable performance.The rc upgrades parts High protection and long durability.
  • 【Easy to install】RC 1/10 Front Caster Steering Blocks kit can be easily upgraded and replaced #3632 Caster blocks, #3736 Steering blocks, #3752....
  • 【Perfectly designed】Rear Stub Axle Carriers With Multi-hole design, adjustable tie rod angle.
  • 【Package Included】1Pair Rear Stub Axle Carriers 1Pair Steering Block 1Pair Caster Blocks (L/R), 8Pcs Suspension Screw Pins, 2Pcs Screw, 8Pcs....
Check Stock

Globact Aluminum Alloy Front Caster Block&Steering Blocks and Rear Stub Axle Carriers kit with Ball Bearings Upgrade Parts for 1/10 Traxxas 2WD Slash, Stampede, Rustler, Replace 3632 3736 3752

  • RC 1/10 front caster steering blocks kit can be easily upgraded and replaced #3632 Caster blocks, #3736 Steering blocks, #3752 Stub axle carriers (rear)..
  • Front steering block knuckle kit is only compatible with 1/10 Traxxas 2WD Slash, Stampede, Stampede VXL, Slash VXL, Rustler, Rustler VXL, Ford F-150 Raptor RC vehicle ONLY..
  • Suitable for traxxas rustler 2wd steering blocks use aluminum alloy material, more wear-resistant, not easy to deform..
  • Multi-hole design, adjustable tie rod angle can be used for Traxxas Slash 2WD Caster Block.
  • Globact 2WD caster steering blocks Include(Necessary parts required for installation): 2*Rear Stub Axle Carriers, 2*Steering Block, 2*Caster Blocks (L/R), 6*Screw Pins, 2*Screw, 8*5x11x4mm bearings, 4*Gasket..
Check Stock

(New) 2- Trailer axle Spring Perch/seat for 1-3/4\ 2000# Round Axel Tube Mount Pad + Check All Models in The Description

  • Rockwell American 3,500 lb Idler Axle - Made in the USA.
  • This Axle Kit Includes: (1) 3,500 lb Idler Axle w/ Hubs, Bearings, Lugs & Nuts (2 Year Manufacturers Warranty), (2) Leaf Springs, (1) U-Bolt Kit, (1) Hanger Kit, (1) 32 oz Johnson Trailer Parts Insulated Mug.
  • This Axle Comes with a Superior Powder Coated Finish and Posi-Lube Spindles that Provide Continuous Bearing Protection.
  • 5 Lug on 4.5 Bolt Pattern (other bolt patterns available - Contact Johnson Trailer Parts).
  • Replaces Dexter, Al-Ko & TK Trailer Axles. This Axle Kit is Available in the Sizes Shown in the 3rd Picture, Search "Rockwell American or Johnson Trailer Parts" in Amazon Search Bar for more Trailer Parts.
Check Stock

Rockwell American Tandem 7,000 lb Electric Brake Trailer Axle Kit w/Springs, Ubolts & Hanger Kit - 8 Lug 6.5\ Bolt Pattern - 14,000 lb Capacity (95\ Hubface - 80\ Spring Center)

  • Rockwell American Tandem 3,500 lb Trailer Axles (1 Electric Brake Axle, 1 Idler Axle) - Running Gear Set (7,000 lb Capacity) - Made in the USA.
  • These Axles Comes with a Superior Powder Coated Finish and Posi-Lube Spindles that Provide Continuous Bearing Protection.
  • This Tandem Axle Kit comes with: (1) 3,500 lb Electric Brake Axle and (1) Idler Axle with Hubs, Bearings, Lugs & Nuts (2 Year Warranty), (2) U-Bolt Kits, (1) Tandem Hanger Kit, (4) Double Eye Springs, (1) 32 oz Johnson Trailer Parts Insulated Mug.
  • 5 Lug on 4.5 Bolt Pattern (other bolt patterns available - Contact Johnson Trailer Parts).
  • Replaces Dexter, Al-ko & TK Trailer Axles. This Axle Kit is Available in the Sizes Shown in the 3rd Picture - Search "Johnson Trailer Parts or Rockwell American" in Amazon Search Bar for more Trailer Parts.
Check Stock

Rockwell American 3,500 lb Idler Trailer Axle Running Gear (Idler Axle W/Hubs, Bearings, Lugs & Nuts, Springs, U-Bolt Kit, Hanger kit. (61\ Hubface, 46\ Spring Center)

  • Rockwell American Tandem 3,500 lb Trailer Axles (1 Electric Brake Axle, 1 Idler Axle) - Running Gear Set (7,000 lb Capacity) - Made in the USA.
  • These Axles Comes with a Superior Powder Coated Finish and Posi-Lube Spindles that Provide Continuous Bearing Protection.
  • This Tandem Axle Kit comes with: (1) 3,500 lb Electric Brake Axle and (1) Idler Axle with Hubs, Bearings, Lugs & Nuts (2 Year Warranty), (2) U-Bolt Kits, (1) Tandem Hanger Kit, (4) Double Eye Springs, (1) 32 oz Johnson Trailer Parts Insulated Mug.
  • 5 Lug on 4.5 Bolt Pattern (other bolt patterns available - Contact Johnson Trailer Parts).
  • Replaces Dexter, Al-ko & TK Trailer Axles. This Axle Kit is Available in the Sizes Shown in the 3rd Picture - Search "Johnson Trailer Parts or Rockwell American" in Amazon Search Bar for more Trailer Parts.
Check Stock

1 New DTA Front Left Side CV Axle + 1 Intermediate Stub Shaft Compatible with 2012-2017 Ram 1500, 4x4, Driver Side

  • Front Left Side CV Axle + Front Left Side Intermediate / Stub Shaft connecting to the Axle.
  • Excellent tolerance to resist high and low temperatures.
  • 12 months or 12,000 miles product warranty.
Check Stock

Ultra-Tow 3500-Lb. Capacity Spring Trailer Axle with Adjustable Spring Mounts - 85in. Hubface, 69 1/2in.-73 1/2in. Spring Center, 90 1/4in.L, Straight

  • Rockwell American 3,500 lb Idler Axle - Running Gear Set - Made in the USA.
  • This Axle Kit Includes: (1) 3,500 lb Idler Axle w/ Hubs, Bearings, Lugs & Nuts (2 Year Manufacturers Warranty), (2) Leaf Springs, (1) U-Bolt Kit, (1) Hanger Kit, (1) 32 oz Johnson Trailer Parts Insulated Mug.
  • This Axle Comes with a Superior Powder Coated Finish and Posi-Lube Spindles that Provide Continuous Bearing Protection.
  • 5 Lug on 4.5 Bolt Pattern (other bolt patterns available - Contact Johnson Trailer Parts).
  • Replaces Dexter, Al-Ko & TK Trailer Axles. This Axle Kit is Available in the Sizes Shown in the 3rd Picture, Search "Rockwell American or Johnson Trailer Parts" in Amazon Search Bar for more Trailer Parts.
Check Stock