Categories

Best Bolt Punch Set

Eapele Impact Bolt Nut Removal Extractor Socket Tool Set for 1/2 inch drive 6pcs

  • Eapele lug remove set with Easy-Out technology and a left-hand spiral design for superior gripping power to remove broken bolts, screws, and studs.The....
  • High-strength 40Cr--- Each socket is made of heat-treated 40Cr vanadium steel and coated in Manganese Phosphate for industrial or mechanical use and....
  • Handy to use---To remove the bolt, simply attach the extractor to a ratchet and place over the damaged head. You can tap it on using a hammer or....
  • Center Punch Bar---A hex top on the extractor makes it easy to use a wrench instead of a ratchet. Once removed, use the center punch to knock the bolt....
  • Portable Case---Each spline extractor has the size etched on for quick reference. A heavy-duty carrying case is included to help ensure a longer life....
Check Stock

Mophorn 10 Ton 1/2' to 2' Hydraulic Knockout Punch Driver Tool Kit Electrical Conduit Hole Cutter Set KO Tool Kit with 6 Dies Hole Complete Tool (Knockout Punches)

  • Labor-Saving & Hydraulic 10T: It is a knockout punch set with a separable hydraulic pump. The maximum crimping power is 10 T. It features a good tightness and no oil leakage. With a safety valve, the pressure will release automatically when the pressure reaches the limited max..
  • Durable Dies & Punches Set: The knockout punch set comes with six punching dies(1/2", 3/4", 1", 1-1/4", 1-1/2", and 2"), drilling holes from 0.86" to 2.36", fully meeting your needs. Two draw bolts are solid and built to last. Max thickness for steel: 0.13".
  • Max thickness for stainless steel: 0.08"..
  • Convenient Operation: The knockout set is fast and easy to operate. With the excellent cooperation of a drill bit and a driving bolt, you can easily get a clean and uniform hole. And the long plastic handle ensures zero sliding and effective force transfer, improving work efficiency..
  • Portable Carrying Case: The stud punch tool is stored in a durable plastic toolbox that is not easily broken, saving space. It is compact, light-weight, and easy to carry. Besides, it also reduces the possibility of missing parts..
  • Wide Application: This manual metal stud punch tool can be used for professional equipment drilling, punching 11 Ga mild steel, iron plate, and also can be used for personal ....
Check Stock

ABN 1/2in Drive Lug Nut Rounded Bolt Remover Socket Set 6pc Stripped Bolt Extractor Kit 17 to 26mm with Center Punch Bar

  • [Remove Damaged Fasteners]: The ABN Bolt Extractor Tool Set 6pc with Center Punch removes stripped, rounded off, or broken lug nuts, bolts, screws,....
  • [Easily Remove from Extractor]: Once fastener is removed from application, the included 3 x 0.4-inch (7.6 x 1.1cm) center punch bar allows for simple....
  • [Fits Your Application]: Metric 17, 19, 21, 22, 26mm permanently laser-etched sizes.
  • 1/2-inch drive and 2-inch (5.1cm) overall lengths of lug nut....
  • [Easy Storage]: Heavy-duty 8.25 x 5.8 x 1.75-inch (21 x 14.7 x 4.4cm) plastic blow-molded carrying case with sliding latch to house bolt extractor....
  • [Quality You Can Trust]: Constructed from chromium-molybdenum (CR-MO) steel.
  • Each instant nut removal tool kit socket comes pre-oiled for maximum....
Check Stock

Real Avid Accu-Punch Hammer & Long Punches Set with Oversized Master Bench Block

  • ESSENTIAL WORKBENCH TOOLS designed with Real Avid’s ingenuity: Accu-Punch Hammer and LONG PUNCHES Set paired up with advanced, specialized Master Bench Block.
  • AUXILIARY TOOLS: Proprietary Pin Alignment Tool and non-marring finishing punch to make common maintenance, modification and repair tasks hassle-free.
  • ACCU-PUNCH HAMMER: adjust to the situation with interchangeable hammer heads: easily switch between steel, brass, rubber, and nylon.
  • grip confidently thanks to ergonomic, rubberized handle – all to allow for maximum control and precision while tapping pins.
  • SET OF SPECIALIZED, LONG PUNCHES: Special Application, Long Punches – selection of nickel-plated steel, standard flat punches and roll pin punches, featuring extended bolt catch pin and magnetized roll pin starter. Designed to fit flush against flat surface, such as receiver..
  • MASTER BENCH BLOCK: large, non-slip, steady work surface, helps protect finish and firearm itself from causing accidental damage. MAGNETIC: captures the small pins – prevents losing pins. Includes magnetic storage solution for common size pins.
  • ADVANCED AND SPECIALIZED: purposefully contoured for standard parts and components. Allows you to work efficiently and confidently. Maximum comfort and maxmum stability f....
Check Stock

ABN Hole Transfer Punch Set for Steel, Wood, Etc – SAE Transfer Set – 28 Piece Transfer Punch Set 3/32 to 17/32in

  • ELIMINATE GUESSWORK: Use the ABN | 28-Piece Transfer Punches Set 3/32-Inch to 17/32-Inch to remove the guesswork of where to place the center punch mark in a hole when transferring dead center from threaded, drilled, tapped, and reamed holes.
  • For toolmakers, machinists, fabricators, and hobbyists to use on metal, wood, and other surfaces.
  • Useful for a tool for die marker or repair, finding rifle stock screw and bolt hole locations, and even rock painting.
  • PERFECT SIZES: 4-7/8-inch (12.4cm) length of each punch with 0.0025-inch undersize for easy use.
  • Standard imperial SAE sizes include 3/32”, 7/64”, 1/8”, 9/64”, 5/32”, 11/64”, 3/16”, 13/64”, 7/32”, 15/64”, 1/4”, 17/64”, 9/32”, 19/64”, 5/16”, 21/64”, 11/32”, 23/64”, 3/8”, 25/64”, 13/32”, 27/64”, 7/16”, 29/64”, 15/32”, 31/64”, 1/2”, 17/32”.
  • BUILT TO LAST: Constructed from heat-treated tempered steel with a black oxide finish for maximum strength and longevity that resists corrosion and prevents rounding, mushrooming, or chipping of the conically-shaped (cone) tips.
  • Flat ends are slightly chamfered at the edge.
  • We recommend using these pieces as transfer punches – not intended to take place of a center punch.
Check Stock

SEDY 16-Piece Punch and Chisel Set, Including Taper Punch, Cold Chisels, Pin Punch, Center Punch

  • Available in 16 different shapes and designs, including: bolt hole alignment, ball head separation, unfolding knuckle, center punch, knockout bolts and pins..
  • Product material: made of Chrome Vanadium Steel, hardness: 54~58HRC. Heat treated chromium vanadium provides a high hardness rating that prevents rapid expansion of the head and passivation of the chisel and punch..
  • 5PC Tapered punch: 3/32" x 5-1/4", 1/8" x 5-3/4", 5/32" x 6", 3/16" x 6-1/4", 1/4" x 6-3/4".
  • 5PC Punch: 3/32" x 4-1/4", 1/8" x 4-3/4", 5/32" x 5", 3/16" x 5-1/4", 1/4" × 5-3/4".
  • 3PC Cold Chisels: 3/8" x 5-1/2", 1/2" x 6", 5/8" x 6-1/2".
Check Stock

AMZCNC 8 Ton 1/2 Inch to 2 Inch Hydraulic Knockout Punch Driver Tool Kit with 6 Dies Hole Complete Tool Electrical Conduit Hole Cutter Set (8T（1/2"~2"）)

  • Labor-Saving & Hydraulic 10T: It is a knockout punch set with a separable hydraulic pump. The maximum crimping power is 10 T. It features a good tightness and no oil leakage..
  • Durable Dies & Punches Set:Actual hole diameter is 0.89" for ½" conduit. Actual hole diameter is 1.11" for ¾" conduit. Actual hole diameter is 1.36" for 1" conduit. Actual hole diameter is 1.7" for 1¼" conduit. Actual hole diameter is 1.95" for 1½" conduit. Actual hole diameter is 2.42" for 2" conduit fully meeting your needs. Two draw bolts are solid and built to last. Max thickness for steel: 1/8".
  • Max thickness for stainless steel: 1/16"..
  • Convenient Operation: The knockout set is fast and easy to operate. With the excellent cooperation of a drill bit and a driving bolt, you can easily get a clean and uniform hole. And the long plastic handle ensures zero sliding and effective force transfer, improving work efficiency..
  • Portable Carrying Case: The stud punch tool is stored in a durable plastic toolbox that is not easily broken, saving space. It is compact, light-weigh....
Check Stock

HORUSDY 16-Piece Punch and Chisel Set Including Taper Punch Cold Chisels Pin Punch Center Punch

  • Available in 16 different shapes and designs, including: bolt hole alignment, ball head separation, unfolding knuckle, center punch, knockout bolts....
  • Heat treated chromium vanadium provides a high hardness rating that prevents rapid expansion of the head and passivation of the chisel and punch..
  • 5PC Tapered punch: 3/32" x 5-1/4", 1/8" x 5-3/4", 5/32" x 6", 3/16" x 6-1/4", 1 /4" x 6-3/4" and 3PC Cold Chisels: 3/8" x 5-1/2", 1/2" x 6", 5/8" x....
  • 5PC Punch: 3/32" x 4-1/4", 1/8" x 4-3/4", 5/32" x 5", 3/16" x 5-1/4", 1/4" × 5-3/4" and 2PC Center punch: 1/8" x 5", 3/16" x 6".
  • Product material: made of chrome vanadium steel, hardness: 54~58HRC.
Check Stock

SWANLAKE Punch and Chisel Set Including Taper Punch Cold Chisels Pin Punch Center Punch 16pcs

  • Available in 16 different shapes and designs, including: bolt hole alignment, ball head separation, unfolding knuckle, center punch, knockout bolts and pins..
  • Heat treated chromium vanadium provides a high hardness rating that prevents rapid expansion of the head and passivation of the chisel and punch..
  • 5PC Tapered punch: 3/32" x 5-1/4", 1/8" x 5-3/4", 5/32" x 6", 3/16" x 6-1/4", 1 /4" x 6-3/4" and 3PC Cold Chisels: 3/8" x 5-1/2", 1/2" x 6", 5/8" x 6-1/2".
  • 5PC Punch: 3/32" x 4-1/4", 1/8" x 4-3/4", 5/32" x 5", 3/16" x 5-1/4", 1/4" × 5-3/4" and 2PC Center punch: 1/8" x 5", 3/16" x 6".
  • Product material: made of chrome vanadium steel, hardness: 54~58HRC.
Check Stock

Otis Technology B.O.N.E. Tool, 7.62mm

  • 16-in-1 multitool to scrape and eliminate carbon fouling from multiple surfaces, including bolt and bolt carrier group.
  • 12 precision cut non-hardened surfaces scrape all 4 major parts of the bolt without marring or scratching.
  • Replaceable, nylon/phosphor bronze detailing brush, 360 degree phosphor bronze brush, cotter pin puller, and a pin punch.
  • Ballistic nylon protective sheath with carry strap provides for easy transport to the field, the range, or at the workbench.
Check Stock

uxcell M10 Concrete Stainless Steel Expansion Open Hook Anchor Bolts 5 Pcs

  • Package Content: 2pcs x Expansion Hook Bolt.
  • Thread Size: M10 x 100mm/0.4" x 4" (D*Bolt Length).
  • Eyelet Diameter: 43 x 26mm/1.7" x 1" (Outer Dia.*Inner Dia.).
Check Stock

Otis B.O.N.E.® Tool (7.62MM) FG-276

  • 16-in-1 multitool to scrape and eliminate carbon fouling from multiple surfaces, including bolt and bolt carrier group.
  • 12 precision cut non-hardened surfaces scrape all 4 major parts of the bolt without marring or scratching.
  • Replaceable, nylon/phosphor bronze detailing brush, 360 degree phosphor bronze brush, cotter pin puller, and a pin punch.
  • Ballistic nylon protective sheath with carry strap provides for easy transport to the field, the range, or at the workbench.
Check Stock

Umbrella Corporation Mil-Spec Stainless Steel Replacement Phillips AR Grip Screw with Washer - Set of 4

  • INCLUDES: 2 steel punches, 1 with counter-bored tips to start roll pins and one with indexing tips to finish roll pins.
  • ACCURACY: Flat on one side for proper alignment.
  • NON-DESTRUCTIVE: Rubber over-molded to prevent damage to your firearm.
  • EASE OF USE: Start bolt catch pins easily with the starter punch and finishes installation flush with the finishing punch.
  • CONVENIENT: Contains both the starter and finishing punch.
Check Stock