Categories

Best Bolt Shim Gaskets

Renovators Supply Manufacturing Black Aluminum Toilet Bolt Cap Cover 1\ H X 1.5\ W Universal Fit Toilet Screw Covering Round Caps Tarnish And Rust Resistant Durable Aluminium Bolt Covers

  • ...made from durable rust resistant industry standard Aluminum material. Toilet bolt covers are used to conceal toilet bowl installation bolts and hide them inside. These bolt caps can universally fit and cover different size of toilets bolts..
  • DIMENSIONS - The package includes a set of two black Toilet Bolt Covers and gaskets. Measures 1 inch in height and 1.5 inches in diameter - Perfect replacement for your worn-out bolt covers!.
  • EASY INSTALLATION - The Toilet Bolt Screw Covers are easy to install with the provided gaskets. They can quickly cover the ugly, rusted or dangerous toilet bolts. Take care not to over tighten the caps, and use the included gaskets. You can easily install these useful tough long lasting covers all by yourself - DIY Toilet Bolt Caps!.
  • BLACK BOLT COVERS - The round black finish of our universal toilet floor screw covers are a great way to keep overall bathroom decor in place, it can instantly enhance the entire look. - Easy cleaning, Simple installation, and has Excellent fit..
  • BUY WITH CONFIDENCE - Our exclusive black tarnish and rust resistant Aluminum Toilet floor bolt covers are designed to last many generations. We provide 100 % satisfaction guarantee for 60 days with no fee..
Check Stock

Allstar Performance ALL60203 Upper Control Arm Shim

  • Control arm shim is an upper type that is .125 inch thick and a dual mount design for use with 6 inch bolt spacing.
  • One-piece dual mount shims are also available in various other thicknesses if needed (all sold separately).
  • Shims allow easy adjustment of caster/camber during front end alignment.
Check Stock

Allstar Performance ALL60207 Upper Control Arm Shim

  • Control arm shim is an upper type that is . 500 inch thick and a dual mount design for use with 6 inch bolt spacing.
  • One-piece dual mount shims are also available in various other thicknesses if needed (all sold separately).
  • Shims allow easy adjustment of caster/camber during front end alignment.
Check Stock

Allstar Performance ALL60208 Upper Control Arm Shim

  • Control arm shim is an upper type that is . 750 inch thick and a dual mount design for use with 6 inch bolt spacing.
  • One-piece dual mount shims are also available in various other thicknesses if needed (all sold separately).
  • Shims allow easy adjustment of caster/camber during front end alignment.
Check Stock

Spring Steel 1095 Shim Sheet Assortment Blue Tempered Polished Finish Spring Steel Shim Stock 0.004 0.008 0.015 0.02 0.024 0.03 Thick 6 Width 6 Length 6 Pieces

  • ✿---- If you are a professional tool or die maker, or a machine maintenance engineer, you may often need these precision gaskets, you can prepare some for emergency use..
  • ✿---- Our spring steel shim sheet assortment including 6 popular thickness（0.004", 0.008", 0.015", 0.02", 0.024", 0.03" ）to meet your various need, great value and practical..
  • ✿---- Spring steel shim sheet is made of high carbon blue tempered spring steel which has a excellent processing performance, can cut or weld according your reqirement..
  • ✿---- Spring steel shim widely used in applications which high toughness and accurance are required. Such as machine installation and maintenance, mold setting, etc.
  • ✿---- As we are so strict with our quality, we have confidence. So we would refund 2 times price if you receive defective product..
Check Stock

Allstar Performance ALL60205-10 Upper Control Arm Shim, (Pack of 10)

  • One-piece dual mount shims are also available in various other thicknesses if needed (all sold separately).
  • Shims allow easy adjustment of caster/camber during front end alignment.
  • Control arm shim is an upper type that is . 250 inch thick and a dual mount design for use with 6 inch bolt spacing.
Check Stock

Allstar Performance ALL60204-10 Upper Control Arm Shim, (Pack of 10)

  • One-piece dual mount shims are also available in various other thicknesses if needed (all sold separately).
  • Shims allow easy adjustment of caster/camber during front end alignment.
  • Control arm shim is an upper type that is . 185 inch thick and a dual mount design for use with 6 inch bolt spacing.
Check Stock

Remflex 8002 Universal Exhaust Gasket, (Set of 2)

  • Universal 3” Collector Flange, 3 Bolt Holes, 3-3/8" Bolt Hole Spacing, 2/Set.
  • Heating and cooling of the exhaust system causes header and manifold flanges to warp resulting in gaps between the head and header which Remflex exhaust gaskets seal completely due to the thickness and compressibility of the 100 percent flexible graphite.
  • Remflex exhaust gaskets come in a standard 1/8 inch thickness and are designed to crush 50 percent allowing them to fill any pits or gaps in the flange surface up to 1/16 inch.
  • The aluminum cylinder head and steel header or manifold combination are configurations that readily cause gap issues in the mating flanges due to contraction and expansion of the dissimilar materials.
  • Remflex exhaust gaskets fill those gaps permanently.
  • There are no rubber binders or composite materials in Remflex exhaust gaskets so they will not shrink or harden due to time or temperature eliminating the need to go back and continually retighten your flange bolts.
Check Stock

Remflex 8001 Universal Exhaust Gasket, (Set of 2)

  • Universal 2-1/2” Collector Flange, 3 Bolt Holes, 3-1/32" Bolt Hole Spacing, 2/Set.
  • Heating and cooling of the exhaust system causes header and manifold flanges to warp resulting in gaps between the head and header which Remflex exhaust gaskets seal completely due to the thickness and compressibility of the 100 percent flexible graphite.
  • Remflex exhaust gaskets come in a standard 1/8 inch thickness and are designed to crush 50 percent allowing them to fill any pits or gaps in the flange surface up to 1/16 inch.
  • The aluminum cylinder head and steel header or manifold combination are configurations that readily cause gap issues in the mating flanges due to contraction and expansion of the dissimilar materials.
  • Remflex exhaust gaskets fill those gaps permanently.
  • There are no rubber binders or composite materials in Remflex exhaust gaskets so they will not shrink or harden due to time or temperature eliminating the need to go back and continually retighten your flange bolts.
Check Stock

Remflex 8003 Universal Exhaust Gasket, (Set of 2)

  • Universal 3-1/2” Collector Flange, 3 Bolt Holes, 3-25/32" Bolt Hole Spacing, 2/Set.
  • Heating and cooling of the exhaust system causes header and manifold flanges to warp resulting in gaps between the head and header which Remflex exhaust gaskets seal completely due to the thickness and compressibility of the 100 percent flexible graphite.
  • Remflex exhaust gaskets come in a standard 1/8 inch thickness and are designed to crush 50 percent allowing them to fill any pits or gaps in the flange surface up to 1/16 inch.
  • The aluminum cylinder head and steel header or manifold combination are configurations that readily cause gap issues in the mating flanges due to contraction and expansion of the dissimilar materials.
  • Remflex exhaust gaskets fill those gaps permanently.
  • There are no rubber binders or composite materials in Remflex exhaust gaskets so they will not shrink or harden due to time or temperature eliminating the need to go back and continually retighten your flange bolts.
Check Stock

Dynatech® 796-21637 BBC Exhaust Header Flange, 2-1/4 Port

  • 【Fitment】 Exhaust Collector Gaskets are especially designed for SBC BBC 302 350 454，fit for 2.5inch collector with Triangle (3 Bolt Pattern).
  • 【Easy Installation】 Come with two gaskets for easy to install and operate.
  • 【Long-Lasting & long-lasting】 Made with top quality solid copper material for maximum durability, not easy to crack.
  • 【Good Performance】 Reusable, no sealant required, good performance.
  • 【Notice】Please check the detail product description and OEM before placing an order. Any issues, please feel free to ask us..
Check Stock

Brass Strip Brass Shim Stock Assortment 1 Width x 6 Length 0.002 0.004 0.006 0.008 0.012 and 0.016 Thickness 6 Pieces

  • With 6 thicknesses to meet your different needs, this is a great value set of brass shim stock..
  • Brass shim stock assortment size: 6" Length x 1" Width, 0.002", 0.004", 0.006", 0.008", 0.012" and 0.016" Thickness.Nicely polished up..
  • Brass sheet is made of brass material, nice bend-ability and can be machined and cut into various parts such as gaskets, washers, shims and spacers..
  • Metal sheets plates widely used in jewelry, crafts, maintenance, electrical, DIY projects, architectural decoration, industry, thermal conductivity, etc..
  • Reliable service: As we are so strict with our quality, we have confidence. So we would refund 2 times price if you receive defective product..
Check Stock

Gibson GP129S Stainless Steel Performance Header

  • Direct Fit bolt-on Replacement, No Welding Required, Uses OEM Style Connections.
  • Heavy Duty Laser Cut Port Flanges-No Warping or Leaking Premium Gaskets and Hardware.
  • Will Not Affect the Factory Warranty. Meets EPA and Carb Requirements.
Check Stock