Categories

Best Bolt With Threaded Head

(10 Sets) 1/4-20x3' Stainless Steel Hex Head Screws Bolts, Nuts, Flat & Lock Washers, 18-8 (304) S/S, Fully Threaded by Bolt Fullerkreg

  • A Hexagon Bolt is a threaded fastener with a hexagonal head shape, and are designed to be installed using a spanner. Hexagon bolts are favoured for their robust shape, which makes them suitable for more heavy-duty fastening applications. Hexagon bolts are also generally available in larger sizes than alternative fasteners..
  • As their name suggests, Full Thread Hexagon Bolts are fully threaded. This type of bolt is required when the shaft of a fastener is being inserted completely into a threaded hole. Fully Threaded Bolts are often used to securely fasten two threaded sections together..
  • Made from 18-8 stainless steel, FullerkregⓇ brand screws have good chemical resistance and may be mildly magnetic. Length is measured from under the head..
  • Screws that meet ASME specifications comply with these dimensional standards.DIMENSIONS: Diameter: 1/4" | Length: 3" | Thread Type: 20 tpi Coarse Thread (Standard).
  • Package includes ten each of bolts, hex nuts , Flat & Lock washers.
Check Stock

(10 Sets) 1/4-20x1-1/2" Stainless Steel Hex Head Screws Bolts, Nuts, Flat & Lock Washers, 18-8 (304) S/S, Fully Threaded by Bolt Fullerkreg

  • A Hexagon Bolt is a threaded fastener with a hexagonal head shape, and are designed to be installed using a spanner. Hexagon bolts are favoured for their robust shape, which makes them suitable for more heavy-duty fastening applications. Hexagon bolts are also generally available in larger sizes than alternative fasteners..
  • As their name suggests, Full Thread Hexagon Bolts are fully threaded. This type of bolt is required when the shaft of a fastener is being inserted completely into a threaded hole. Fully Threaded Bolts are often used to securely fasten two threaded sections together..
  • Made from 18-8 stainless steel, FullerkregⓇ brand screws have good chemical resistance and may be mildly magnetic. Length is measured from under the head..
  • Screws that meet ASME specifications comply with these dimensional standards.DIMENSIONS: Diameter: 1/4" | Length: 1-1/2" | Thread Type: 20 tpi Coarse Thread (Standard).
  • Package includes ten each of bolts, hex nuts , Flat & Lock washers.
Check Stock

JYAU RZR Steering Wheel Puller Tool for Polaris UTV XP1000 Turbo

  • Steering Wheel Puller Tool is a must have for race teams and recreational riders. Made from billet aluminum construction, a heavy duty center bolt for maximum leverage and socket head allen screws for outer edge pressure..
  • Compatible Replacement for Polaris RZR UTV XP1000 Turbo with the 2 threaded holes steering wheel - DOES NOT fit 2018+ XP Turbo S with Sparco steering wheel..
  • This Steering Wheel Puller Tool is designed for Polaris Vehicles with the 2 threaded holes in the OEM steering wheel. We recommend you pop the center steering wheel cover off to verify that your steering wheel has the 2 holes..
  • Usage Method - Heavy duty center bolt for maximum leverage Socket head allen screws for outer edge pressure Screw it to the threaded holes in your stock steering wheel and then tighten the center screw..
  • 1-Year Warranty - This Steering Wheel Puller Tool comes complete with a 1-Year Warranty. If the puller tool ever fails on your Polaris RZR UTV XP1000 Turbo within the period, simply contact us for a replacement. Save time and money by taking advantage of this ..
Check Stock

O'SKOOL 5 Star T-Track Knobs Kit 4-Pack with Star Threaded 1/4-20 Knobs, Bolts and Washers

  • INCLUDES: (4 ) Red 5star knobs 1/4”-20 UNC threaded knobs , (4 ) hex head bolts 1/4”UNC X 3 inch,(4 ) washers, (4 ) plastic washers.
  • Red knob kit with an ergonomic design for smooth handling and comfort . Stainless steel hex head bolt has pullout resistance and durability. Washers for your convenience，It is mainly used to reduce pressure and friction..
  • EASY TO USE : Tighten the knob, bolts, and washers arranged together to help secure and enhance your woodworking jig assemblies..
  • HOW TO USE : To use on your T-track, insert the head of a bolt into the track with a washer and align it with the threaded knob.
  • APPLICATION: This is for a retaining clip for use with a T-track slot, fixtures, and splint..
Check Stock

uxcell 1/4-Inch Flat Washer, Alloy Steel Black Oxide Finish Pack of 50

  • Fit for Screw Threaded Dia: 1/4"；Size: 15.7mm x 1.5mm/0.62" x 0.06"(OD x T).
  • Alloy steel black oxide finish for corrosion resistance, for outside applications, easy to install..
  • Prevents a nut, bolt, or screw from pulling through the material.
  • Apply for electrical connections on household and commercial appliances and in threaded bolt connections..
  • Flat washers are used under the head of a bolt or nut across the area of the support to prevent pull through..
Check Stock

1-1/2\ T-Slot Bolt

  • Built to last:Compared with mormal stainless steel,it's more antirust and corrosion-resistant.
  • Unlike standard bolts and screws, these threaded wood inserts T bolts will not strip easily or over tighten..
  • Easy to use: Measure and cut your bolt channel groove or use a pre-cut T-track that meets the size of your T bolt head.
  • Once the track has been established, you can easily slide the T bolt into place and use a knob or T nut to tighten and hold the bolt in place..
  • Application:Widely used for aluminum alloy, rack assembly and clamping lock,T-slot track or wooden groove, but can also be used when building furniture, assembling sheds, decks, and cabinetry, or installing speakers or caster wheels..
Check Stock

3/8-16X2 1/2 Carriage Bolt Grade 8 Fully Threaded Zinc Yellow Pack of 10

  • Round head bolt with a square neck under the head, and a unified thread pitch..
Check Stock

uxcell 5pcs 304 Stainless Steel Shoulder Bolt 5mm Shoulder Dia 16mm Shoulder Length M4 Thread

  • Head Size: 3.5 x 9mm / 0.14" x 0.35" (T*D).
Check Stock

Tactical Bolt Knob for B-14 Rifles

  • Compatible with all bolt handles threaded in standard 5/16"-24.
  • Machined from 17-4 Stainless Steel and Heat Treated for optimal strength and durability..
  • Physical Vapor Deposition (PVD) Coating - a metal ceramic film that exhibits a high micro-hardness (1500-8000 HV), in excess of 80 HRc..
  • 100% Manufactured and PVD Coated in the United States of America..
  • Installs easily on 5/16"-24 pre-threaded bolt handles.
  • requires gunsmithing for non-threaded bolt handles..
Check Stock

uxcell 10pcs 304 Stainless Steel Hex Socket Shoulder Bolt 5mm Shoulder Dia 5mm Shoulder Length M3 Thread

  • Head Size: 3.5 x 9mm / 0.14" x 0.35" (T*D).
Check Stock

Method Race Wheels 106 Beadlock Method Bronze 17x9" 5x5", 44mm offset 3.5" Backspace, MR10679050944B

  • Developed for the serious off-road enthusiast. Solid A356 aluminum with T6 heat treatment construction.
  • Tough 6 windowed point design with debossed METHOD logos. Reinforced inner lip provides extreme strength and durability.
  • Extra wide bead seat is 17% bigger to accommodate largest tires. Forged 6061 aluminum V.3 beadlock ring is 53% thicker and reduces deflection.
  • Recessed hardware has 360 degree protection to prevent bolt head shearing. American made Grade 8 zinc-plated beadlock hardware kit included. Redundant sets of threaded beadlock hardware holes machined into wheel.
  • Bolt-on center cap with embossed METHOD logo. Hub centric fitments for common applications. Super strong 3600 lbs. load rating. Custom bolt drilled bolt patterns and hub openings available.
Check Stock

uxcell 10pcs 304 Stainless Steel Hex Socket Shoulder Bolt 8mm Shoulder Dia 8mm Shoulder Length M6 Thread

  • Head Size: 5.5 x 12.8mm / 0.22" x 0.5" (T*D).
Check Stock

Tactical Precision Manufacturing Titanium Bolt Knob 5/16x24 - Dragon Scale - (Long) 1.90

  • Compatible with all bolt handles threaded in standard 5/16"-24.
  • Machined from 17-4 Stainless Steel and Heat Treated for optimal strength and durability..
  • Physical Vapor Deposition (PVD) Coating - a metal ceramic film that exhibits a high micro-hardness (1500-8000 HV), in excess of 80 HRc..
  • 100% Manufactured and PVD Coated in the United States of America..
  • Installs easily on 5/16"-24 pre-threaded bolt handles.
  • requires gunsmithing for non-threaded bolt handles..
Check Stock