Categories

Best Bolt on Hinge

J-Bolt Post Hinge 6\ - Hinge Bolts Thru The Post Includes Nuts - J-Bolt Hinge has 5/8\ Male Pin - Fence Bolt Though Post Hinge - Quantity 2

  • Dimensions - 6" length (4.25" usable thread) - .625 diameter - 5/8" hinge pin - pin height ~1.5".
  • J-Bolt Hinge has 5/8" hinge pin to work with common gate frame hinges.
  • 6" Gate Hinge is made of galvanized steel to prevent rust and corrosion.
  • J-Bolt thru post hinges are easily adjusted even after the gate is installed.
  • Nuts for gate hinge are included - Washers are NOT Included.
Check Stock

3/4\ J-Bolt with Plate J Bolt Hinges for Large Heavy Driveway Gates, Steel, Iron, Wood or Aluminum Mounts on a 4\ X 4\ Post

  • Hinge pivots on a steel ball bearing and includes a grease fitting to keep the bearing lubricated.
  • Hinge has a 3/8" X 11/2" welded plate with 2 holes to attach to an existing structure.
  • This hinge will swing a full 180 degree if installed without a stop.
  • The J-Bolt arm which attaches to the gate frame and is adjustible. Price is per Pair.
  • Threaded Bolt 7" Over all lenght,Sold in Pairs,Includes Grease fitting,Will fit on a 4" X 4" Post.
Check Stock

LA Ornamental Heavy Duty Guardian Compatible Gate Adjustable Hinge Driveway Bolt On Gate & Post with Zerk

  • Largest weld surface with Large BOLT ON Plates which makes easy to install and mount.
  • Grease zert for easy lubrication, ADJUSTABLE GATE HINGE - BOLT ON GATE & POST WITH ZERK, size: 7 3/4 " High x (from 3 1/4" to 3 3/8" wide).
  • Maximum weight rating of 1000 lbs per pair of hinges.
Check Stock

Universal Lambo Door Bolt Kit Bolt On Vertical Doors Hinge Kit Adjustable 90 Degree Door Bolt Kit Fit for Most Cars Vertical Lambo Door Conversion Kit

  • 【HIGH COMPATIBILITY】This vertical door hinge kit is compatible with most models of Chevrolet, Nissan, Mazda, Ford, Subaru, Toyota and so on..
  • 【PROFESSIONAL DOOR BOLT KIT】By applying vertical door hinges, the door can be opened even in a narrow area, thereby avoiding damage to pedestrians and the door itself, the best door conversion tool..
  • 【NEW DOOR HINGE KIT】Vertical door hinge kit, bolt installation, universal. The vertical door subverts the traditional way of opening the door outside, and the hinge opens upward..
  • 【NOTE】Includes two 90-degree structures. Four inflatable pillars at 150 PSI. May require bolting, drilling and welding..
  • 【PROFESSIONAL SERVICE】If you have any questions or if you receive unqualified or damaged products, please contact us timely and we will handle them immediately, We are committed to provide best service for every customer.We ship directly from the US warehouse..
Check Stock

Waterson Heavy Duty Commercial Fully Adjustable Mortise Self-Closing Gate Hinges 2-Pack – K51MP-450 (SA.SA1)-Black

  • HIGH STRENGTH - The gate hinge is made of high quality steel so that each pair of the hinge can hold up to 400lbs driveways and security gates!.
  • RUST RESISTANT - The black powder coating makes the hinge has a superior rust resistance performance!.
  • EASY TO INSTALL - Weld the flat backing plate to the mounting post. If not already available, drill a hole through the gate frame big enough for the threaded bolt. Pass the bolt through, and secure with nuts. Hinges must be mounted with the thread arm at the top. If mounted upside down, the gate will fall.Minimum distance between post and gate should be 1.5", to accommodate for the welding plate and barrel. The threaded arm allows you to easily adjust the distance between gate and post!.
  • LONG LIFE TIME - Hinge pivots on a steel ball bearing and includes a grease fitting to keep the bearing lubricated. It'll last a long life time in good maintenance!.
  • EXCELLENT SERVICE - Backed by a 12 month Warranty and 7*24 hours Technical Support!.
Check Stock

D&D Technologies TCHDMA1 Multi-Adjust Heavy Duty Gate Hinges, for Self Closing Wood and Vinyl Gates up to 132 Pounds, 3-Way Adjustable, Gap up to 1 3/8", Black, 2 Count

  • 900LB Capacity per hinge - Ball Bearing With Grease Zerk Fitting LISTING IS FOR 2X COMPLETE GATE HINGE SET.
  • The hinges are precision machined from high strength, solid cold roll steel bar. They are fitted with ball bearing for extra smooth easy operation..
  • Unlike ordinary hinges that will seize up fail to work due to age and weather conditions, these will always operate like new. Zerk fitting for adding grease makes for hinges that will last a very long!.
  • SPECIFICATIONS: -Weight capacity per hinge: 900 lbs -Hardened, heat treated cold rolled steel. -Precision Machined -Ball Bearing -Zerk fitting for greasing -Welding Tabs -J Bolt length is 7-1/4" -3/4" J-Bolt with Zinc Plated Nuts and Washers -Barrel is 4-5/8" by 1-9/16" -Powder coated.
  • Includes: -2x Heavy Duty Steel Hinge Set - 3/4" J-Bolt style with weld tabs - Ball bearing and zerk fitting for grease.
Check Stock

ViaGasaFamido Bolts Set Toilet Pedestal Pan Water Tank Bolts Portable Reliable Rubber Professional Corrosion Resistant Durable Toughness Practical Screw Kits

  • Package Content: 2 x Toilet Seat Hinge Bolt.
  • Total Size: 28 x 28 x 67mm/1.1" x 1.1" x 2.6" (L*W*H).
Check Stock

V8 GOD JL Tailgate Hinge Flagpole Mount & CB Radio Antenna Holder for Jeep Wrangler JL & Unlimited 2018 2019 2020 2021 2022 Sahara Rubicon Freedom Sport

  • Tailgate Hinge Flagpole Holder Fits for Jeep Wrangler JL 2018 2019 2020 2021 2022 Unlimited Sahara Rubicon Sport Freedom.
  • Made of Aluminum Alloy, Won't Rust, Corrode or Peel.
  • Easy Bolt-on Installation,Uses your JL Tailgate's Factory Hinge Mounting Locations, Fix the Pole With Equipped Installation Bolt and Screw (Note: Does....
  • Fix the Flagpole and CB Radio Antenna Braket As Picture Showed.
  • Just Put the Antenna and Flagpole Into the Hitch....
  • Please Do Not Hesitate to Contact for 180-days Warranty Service, V8 GOD Customer Service will reply you Within 12 hours.
Check Stock

National Hardware N238-212 V287 Extra Heavy Gate Hinges in Galvanized, 2 pack

  • Premium quality: Premium fence post chain link gate hinge, made of high quality iron, silver galvanized coating, prevent red-rust, you can use them for a long time in your outdoor fence door or fence door..
  • Elaborate design: The fence gate hinges for starting or ending your fence against a flat vertical surface, The 5/8" male pin will let you use in conjunction with a 5/8" female Frame Hinge, The perfect flat back size fits most gates..
  • Easy to install: Using a drill to make holes in walls and boards, screw or bolt are used to install the gate hinge with install-no special skills..
  • Package includes: 2 pack wall mount gate hinges with 5/8" hinge pin, screws length will depend on what you are mounting it on. (Screws not included)..
  • Wide application: Gate Hinges are great for sheds, fences, screen fences, barn doors, flat wood fence, square wood post, or any upright flat surface, etc..
Check Stock

ALEKO Small J-Bolt Hinge for Doors and Driveway Gates - 5/8 Inch - LM144

  • Our j-bolt hinge is the perfect complement to your door or swinging gate.
  • The hinge pivots on an adjustable steel ball bearing and includes a grease fitting which keeps the bearing lubricated.
  • Made for ALEKO brand iron doors and galvanized steel driveway gates, but will work anywhere you need a strong and reliable hinge.
  • Comes with all necessary fixings, including (2) bolts, (2) nuts, and (2) washers.
  • For a more in-depth breakdown of dimensions see product images.
Check Stock

ALEKO Small J-Bolt Hinge for Doors and Driveway Gates - 1/2 Inch - LM113

  • Our j-bolt hinge is the perfect complement to your door or swinging gate.
  • The hinge pivots on an adjustable steel ball bearing and includes a grease fitting which keeps the bearing lubricated.
  • Made for ALEKO brand iron doors and galvanized steel driveway gates, but will work anywhere you need a strong and reliable hinge.
  • Comes with all necessary fixings, including (2) bolts, (2) nuts, and (2) washers.
  • For a more in-depth breakdown of dimensions see product images.
Check Stock

WANLIAN Heavy Duty 90 Degree Glass Door Cupboard Showcase Cabinet Clamp Glass Shower Doors Hinge Replacement Parts Wall-to-Glass for 8-12 mm(0.31-0.47 inch),Stainless Steel Polished Chrome

  • 1.glass warehouse hinge Constructed from high quality Stainless Steel,ensuring quality and longevity,sturdy and durable,Stainless Steel Polished Chrome.
  • 2.Polished Chrome Finish and 4mm-Thick stainless steel will not broken,Single Ear Stepless Hose Clamps 304 Stainless Steel Wire Tube Pipe Fuel Line Clip Assortment kitHeavy Duty 90 Degree Glass Door Cupboard Showcase Cabinet Clamp Glass Shower Doors Hinge Replacement Part Wall-to-Glass.
  • 3.Notice: Fits 8mm-12mm or 1/3" to 1/2" Thick Glass,largest bearing 40 lbs per hinge.shower door hinges shower hinges glass door glass hinge frameless shower door hinges glass door hinges shower door hinge shower door hardware glass shower door hinge gasket.
  • 4.Self closing from 25 degrees and self centering to 0 degrees in the closed position.frameless shower door hinges shower hinges glass door glass door hinges shower door hinge shower door hinges glass door hinge glass shower door hinges glass shower door hinge gasket shower door hinge gasket glass hinge.
  • 5.Included package:1x hinge,4X screws and expansion bolt, and 1 Allen key.shower door hinge shower hinges glass door frameless shower door hinges glass door hinges living hinge shower door hinge gasket shower door hinges glass door hinge glasses hinge.
Check Stock

Prime-Line MP9028-10 Hinge Pin Door Stop, 1-3/8\

  • Used to prevent door handles from damaging adjacent walls, and for stopping the door at an alternate distance.
  • 1-3/8 In. long adjustable bolt, 5/8 in. outside diameter rubber bumpers, and a 5/16 in. inside diameter for hinge pin insertion.
  • For further dimensional information, please see the line drawing.
Check Stock