Categories

Best Bolt on Shocks

Supreme Suspensions - Front or Rear Bow Tie Shock Extenders for 2' Lifted 1982-2004 Chevrolet S-10 [2WD 4WD]

  • COMPATIBLE WITH 1982 - 2004 Chevrolet S-10 (2WD 4WD). Fits Front or Rear Stock Shocks..
  • CONTENTS: 2x High-Density Delrin Shock Extenders, Installation Hardware, Installation Instructions, and Supreme Suspensions Pro Pack.
  • TECHNICAL NOTES: Accomodates 2" Lift Kits. *For shocks that use a 2.75" wide mount ONLY..
  • INSTALLATION: Easy bolt-on installation takes 1 to 2 hours without the need for special tools. NO cutting, grinding or welding required..
  • BENEFITS: Does NOT compromise factory ride quality, reduces over-extension of stock shock pistons and eliminates the need of replacing stock shocks..
Check Stock

Supreme Suspensions - Rear Shock Lift Extenders for 2' Lifted GMC K-Series 4WD | K1500 K2500 K3500

  • COMPATIBLE WITH 1988 - 1999 GMC K1500, K2500 and K3500 (4WD Only). Fits Rear Stock Shocks Only..
  • CONTENTS: 2x High-Density Delrin Shock Extenders, Installation Hardware, Installation Instructions, and Supreme Suspensions Pro Pack.
  • TECHNICAL NOTES: Accomodates 2" Lift Kits. *For shocks that use a 2.75" wide mount ONLY..
  • INSTALLATION: Easy bolt-on installation takes 1 to 2 hours without the need for special tools. NO cutting, grinding or welding required..
  • BENEFITS: Does NOT compromise factory ride quality, reduces over-extension of stock shock pistons and eliminates the need of replacing stock shocks..
Check Stock

Supreme Suspensions - Front Shock Lift Extenders for 1993-1998 Jeep Grand Cherokee ZJ [2WD 4WD] | for 2 Inch Lifted Jeep

  • COMPATIBLE WITH 1993 - 1998 Jeep Grand Cherokee ZJ (2WD 4WD). Fits Front Stock Shocks Only..
  • CONTENTS: 2x High-Density Delrin Shock Extenders, Installation Hardware, Installation Instructions, and Supreme Suspensions Pro Pack.
  • TECHNICAL NOTES: Accomodates 2" Lift Kits. *For shocks that use a 2.75" wide mount ONLY..
  • INSTALLATION: Easy bolt-on installation takes 1 to 2 hours without the need for special tools. NO cutting, grinding or welding required..
  • BENEFITS: Does NOT compromise factory ride quality, reduces over-extension of stock shock pistons and eliminates the need of replacing stock shocks..
Check Stock

TORCH Extended Rear Shocks (FOR a 2"-4" Lift) for 2005-2022 Toyota Tacoma 4X4 RWD SR5 TRD - 6 Lug (wheel lug) Models ONLY

  • FITS: 2005-2022 Toyota Tacoma RWD 4X4 (6 LUG MODELS ONLY - will NOT fit 5 lug models).
  • CONTENTS: TORCH Extended Shocks for 2"-4" Rear Lifts (2pc left/right), Shock Mount Hardware, Dust Boots with zip ties.
  • INSTALLATION: Bolt on kit. Comes with step by step instructions for the DIY backyard mechanic..
  • Ships Same/Next Business Day. 2-3 Day Delivery. 5 Year/50,000 Mile Warranty. Dedicated Customer Service. Call or message us with any questions!.
  • NOTES: These Shocks Do NOT Lift Your Truck. LIFT KIT required to use these shocks. 6 LUG MODELS ONLY.
Check Stock

Bilstein 5100 Set of Front and Rear Shocks for 2003-2009 Toyota 4Runner and 2007-2009 FJ Cruiser with 0-2.5 Inch Front Lift and 0.5-2.5 Inch Rear Lift | Includes TrendsAuto Decal | 24-324359 33-313146

  • Improves Ride Quality - Perfect for both on and off-road conditions, these shocks will improve handling and ride quality by providing you with a smooth, comfortable ride as they instantly react to changing surface conditions and ensure a consistent, fade-free ride performance. They feature a 46mm monotube design, patented digressive valving, durable vulcanized neoprene rubber bushings, and zinc plating for resistance against harsh elements..
  • Perfect for Leveling - Designed to level out the front of your truck, Bilstein 5100 shocks are the perfect alternative to coil spring spacers. These shock absorbers feature an adjustable spring perch for lifting and use your vehicle's OEM springs and mounting hardware for an easy, direct-fit installation..
  • Built to Fit Vehicle - One size does not fit all. These Bilstein 5100 shocks are valved and tuned specifically for 2003-2009 Toyota 4Runner or 2007-2009 FJ Cruiser without X-REAS Suspension and with a 0 - 2.5 inch front lift and 0.5-2.5 inch rear lift and to consider it's many use factors including towing, tire pressure, and much more..
  • Easy to Install - Bolt on and head out....
Check Stock

JEGS GM 10 & 12 Bolt Rear Disc Brake Conversion Kit with Parking Brake - Fits Standard Shock Configuration, Plain Rotors, Loaded Calipers - Rear Disc Brake Hardware Kit

  • For standard shock applications with both shocks either forward or behind the rear axle housing..
  • Easy bolt-on solution to upgrade from drum to disc brakes..
  • Fits most 10 & 12 bolt rear axles and GM A body disc brake conversion..
  • Includes 11 inch plain rotors, rubber hoses, loaded calipers, parking/emergency brake kit, and hardware..
  • Minimum required wheel diameter is 15”..
Check Stock

Electric Center Stand Air Ride Suspension Kit W/Air Tank For Harley Touring Road King Electra Street Glide 2017-2020

  • Condition: Aftermarket 100% Brand New and High Quality MRI Center Stand & Air Ride Suspension Kit & Air Tank.
  • Air Ride Kit: This is a complete kit assembled to replace your stock touring shocks with height-adjustable air shocks. Fully Collapsed approx.....
  • Center Stand: Made of Metal + Aluminum + Stainless Steel, This item can be bolt on in minutes and use a linear actuator to raise and lower the legs....
  • This kit will allow you to lower your bike 2 to 3 inches with all of the air released.
  • The air it up to stock ride height for a smooth ride in a....
  • Fitment: For 2017-2020 Harley Davidson Touring model Road King Street Glide Road Glide Electra Glide, etc.
Check Stock

383 Chevy vs. 383 Mopar!

  • [Easy Installation] No-cut, no-weld design makes for the fastest bolt-on install possible, with easy to follow instructions included.
  • [Customize Your Ride] Tailor your ride for height and comfort with the adjustable coil-over shocks.
  • [Increased Ride Height] Installing a Long Travel Lift Kit allows you to run up to 23" tires on your golf cart, giving you the extra height you want.
  • [Made in the USA] Assembled by hand with quality American craftsmanship.
  • [Important Notes] Stock wheels and tires will not work with this kit.
  • OEM style head light bar will not fit once this lift kit is installed.
Check Stock

4 Pc 5x120 to 5x112 Black Hub Centric Conversion Adapters 20MM Thickness | 72.56/74.1 Hub Bore To 57.1 Wheel Bore Compatible With BMW Vehicle To Adapt 5x112 Wheels

  • 4 Brand New Black Hub Centric 5x120 To 5x112 Conversion Adapters | COMPLETE BOLT-ON KIT | EASY INSTALLATION |.
  • Wheel Adapter Specifications: Color: Black | Thickness: 20 MM | Bolt Pattern: 5x120 MM | Wheel Pattern: 5x112 MM | Hub Bore: 72.56 MM or 74.1 MM | Thread Pitch: 14x1.5 | Material: Aerospace 6061 T6 Forged Aluminum.
  • Hub Centric = The Correct Way To Space Out Your Wheels. Our Spacers Fit Perfectly Over Your Vehicles Hub, Which Eliminates Any Possibility Of Vibrations At High Speeds. Perfect For Fixing Clearance Issues, For Example.
  • Your Wheels Hitting Shocks/Struts Or Brake Calipers.
  • Gives your vehicle an aggressive stance & allows for better handling characteristics. We have tested these adapters in high horsepower mustangs and have withstand every single time..
  • Allows you to put 5x112 mm wheels on 5x120 Vehicle or simply convert your bolt pattern to a 5x112.
Check Stock

4 Chevy & GMC 6x5.5 Black HUB Centric 2

  • 4 Pc Brand New Chevy Gmc Cadillac 6 Lug 2" Thick Black Hub Centric Wheel Spacers Adapters.
  • Wheel Adapter Specifications: Color: Black | Thickness: 2" (51MM) | Bolt Pattern: 6x5.5" (6x139.7mm) | Wheel Bolt Pattern: 6x5.5" (6x139.7mm) | Center Bore: 78mm | Thread Pitch: 14x1.5 | Material: Aerospace 6061 T6 Forged Aluminum.
  • Hub Centric = The correct way to space out your wheels. Our spacers fit perfectly over your vehicles hub, which eliminates any possibility of vibrations at high speeds. Perfect for fixing clearance issues, for example.
  • your wheels hitting shocks/struts or brake calipers.
  • Gives your vehicle an aggressive stance & allows for better handling characteristics. We have tested these adapters in aggressive off-road and have withstand every single time..
  • Made In The USA Other sizes available 1", 1.25", 2", 2.5", 3", 3.5", 4" Thick..
Check Stock

Bilstein 6112 Struts & Spring Rear 5100 Shocks Set for 96-02 4Runner 4WD 0-2.3"

  • Kit includes Front Ride Height Adjustable and matching Rear 5100 Series Shock Absorbers..
  • Kit compatible with 4Runner 4WD 2003-09. ***Excludes adjustable (X-REAS) suspension***.
Check Stock

SUPERLIFT K1007 | 2.5" Lift Kit for 2011-2016 Ford F-250 and F-350 4 Wheel Drive

  • Fits 2011-2016 Ford F-250 and F-350 4 Wheel Drive.
  • Provides 2.5" of lift and includes Shadow Series shocks.
  • 100% bolt-on super-simple installation. Installs with basic hand tools.
  • Included components: Lift Kit, Instrucrions, and Necessary Hardware.
Check Stock

Rough Country 3 Lift Kit w/N3 Shocks for 1996-2002 Toyota 4-Runner 4WD - 77130

  • Give your 4-Runner the Perfect Blend of Performance, Protection, and Style from Rough Country..
  • Unmatched Ground Clearance | Premium N3 Shock Absorbers the Best in Performance for On and Off-Road Use..
  • Strut extensions do not preload your coil spring | Rear shocks manufactured with recoil cut-off construction..
  • Easy at Home Bolt-On Installation Supported by RC..
  • Backed by Rough Country's Limited Lifetime Replacement Warranty..
Check Stock