Categories

Best Bolt screw

Push Barrel Bolt Latch Slide Lock ATTHW® 2 Pack 3 Inch Spring Stainless Steel Barrel Locks for Garage Sliding Gate Latches for Inside Door Press Button Hardware for Rv, Toilet, Bathroom Shed Cloakroom

  • ...as a replacement bolt latch perfect for room doors, boxes, yards, fences, cabinet doors, shed, chests, closets, kennels, chicken coop, and windows..
  • ✅Easy to Install: 1.Decide where you want the lock and take the small side piece hold it up against the frame.2.Use a pencil to make two circles, pre-drill, then screw in with the screws. 3.Take the larger piece and push the bolt across so that it’s through the piece you’ve already installed to hold it in place.4.Use a pencil to mark the upper left-hand place for the screw for the first hole. 5. Once you have one screw installed it’s much easier, again pre-drill and then installs other screws..
  • ✅What You Get: 2 x Barrel bolt latch silver, 12 x Screws (Warm Tip: For single doors, you can install one barrel bolt latch on top, middle, and bottom randomly. For double doors, you can install one bolt latch on the top and bottom randomly. But you cannot install only one bolt latch in the middle of the double door. You need to install one bolt latch at the top or bottom of the door. ).
Check Stock

5Pcs Screw Extractor Set Spiral Flute Bolt Extractor Set Cr-MO Easy Out Bolt Extractor Set for Removing Stripped Screws and Broken Bolts

  • Multiple Size to Choose: Bolt extractor set include:19/64",1/4",3/16",5/32",1/8".You can choose the appropriate screw extractor size according to your required size to meet your various work requirements..
  • Easy Out Bolt Extractor Set: Broken bolt extractor kit can helps faster removing broken studs, bolts, socket screws, and fittings..
  • Multi-Purpose:Bolt remover that remove broken screws, whether working on wood or metal, are ideal for construction, automotive, home DIY projects or for industrial use..
  • High-quality CR-MO Steel: Speed out screw extractor set are made of high-quality chromium molybdenum steel.Durable and not easily damaged..
  • Stamping Size: Spiral flute screw extractor dimensions are engraved on the extractor for easy identification.Whether ez out bolt extractor sets for car maintenance or daily use, it can provide you with great convenience..
Check Stock

LASCO 04-3677 Kohler Three Bolt Tank to Bowl Set, 5/16-Inch x 2 1/8-Inch, Solid Brass

  • ...lt caps are made from excellent quality hard plastic that doesn’t crack. The rounded toilet bolt caps are precisely designed to fit on your rusted, unsightly, and old bolt knobs. Not only the plastic toilet bolt covers easy a universal fit but also super easy to clean..
  • Ideal Size and Shape: The stylish floor bolt screw caps have no sharp or hard edges. The rounded bolt caps are 7/ 8 in in height and 1-7/16 in width that’s perfect to cover the old knobs and compliment the modern look of the bathroom. Our range of bathroom accessories arrive in multiple soft colors to keep the aesthetics of your washroom intact..
  • Super Easy Installation: The contemporary toilet bolt screw caps come with convenient snap-on inserts. You can watch a DIY tutorial on how easy is it to install toilet floor caps. Rather, if you are moving into an old apartment or rental home, it’s better to cover the rusted bolt covers..
  • Premium Modern Finish: The pastel to white finish toilet screw covers blend well the modern to minimalistic interiors of your bathroom. The shiny and smooth finish of the plastic toilet bolt caps makes them a sleek choice for your toilet interior designing..
Check Stock

502pc Motherboard Standoffs Screw Kit | Basic Computer Screws Set for HDD Hard Drive, Case, Fan, Power Card, Graphics, Chassis, CD-ROM, ATX Case | for DIY & Repair

  • ... metric and imperial standoffs offering a 99% fit in all types of mother board installations. Other kits don’t include an imperial size standoff which is necessary in many installations. No need to buy multiple kits to try and find the right size fastener with Bolt Dropper’s..
  • {502 Piece Kit} The Bolt Dropper PC Screw Kit contains more of the most used screws, nuts, washers, and chassis hand twist screws than others. This way you don’t run out during your build or repair. Other kits contain only a few chassis screws for your case, but Bolt Dropper contains more than double of the next leading brand. The 530-piece kit not only contains more quantity of each but also contains a larger variety & color of fasteners to help you find the right fastener for the right job..
  • {High Quality Screws} High quality screws with deep cut drives prevent stripping and snapping as well as ensuring a secure fit. When you’re constantly upgrading and removing parts, a screw that doesn’t strip is essential. Bolt Dropper’s precision-made fasteners add a layer of confidence knowing you can add and remove them time and time again without worry of ever stripping a head or snapping a screw..
  • {Great for Computer Building & Repair} Guaranteed to fit 99% of all PC building....
Check Stock

10Pcs Screw Extractor and Left Hand Drill Bits Set, Bolt Remover Reverse Cobalt HSS Steel Drill Bit for Remove Stripped Screws and Broken Bolts

  • Save Time and Effort: Broken bolt extractor kit are used to remove stuck, broken or screwed tools. The stripping bolt remover and extractor easily removes damaged screws, studs, bolts and other accessories..
  • Unique Design: ez out bolt extractor set is designed with a 135°angle, which makes it easier to cut into the workpiece and has less axial resistance. This design can not only increase the working length of the cutting edge, but also reduce the thickness of the cutting layer, which making the cutting effect better and without damaging other working areas..
  • Multi-Purpose: Simple drill extractor is multipurpose on your life. Bolt extractors that remove broken screws, whether working on wood or metal, are ideal for construction, automotive, home DIY projects or for industrial use.These extractors are excellent if you are working in a production environment and using screw head bolts..
  • High and Durable Material: The left hand drills are made from cobalt fortified HSS material, which increases durability and service life.This screw extractor has strong wear resistance and clear chip removal. HSS is harder, tougher and easier....
Check Stock

Thinkpro 26Pcs Bolt Extractor Set and Drill Bit Kit, Multi-Spline Screw Extractors, Easy Out Broken Lug Nut Extraction Socket Set for Damaged, Frozen,Studs,Rusted, Rounded-Off Bolts, Nuts & Screws

  • 26PCS Screw&Bolt Extractor Set: This is a set of saved your lots of time and frustration, 3-in-1 screw & bolt extractor sets and drill bit kits.Package including: 13PCS Nut Remover Set: 1/4″, 5/16″(8mm), 3/8”, 10mm, 7/16”(11mm), 12mm, 1/2”, 13mm, 9/16”(14mm), 5/8”(16mm), 17mm, 11/16”, 3/4”(19mm).
  • 6PCS HSS Cobalt Drill Bits: 3/8″, 9/32″, 1/4″, 5/32″, 1/8″, 3/32″.
  • 6PCS Spiral Screw Extractors: #1, #2, #3, #4, #5, #6.
  • 1PCS 3/8″-1/4″ Hex Adapter. Multiple specifications and sizes to meet your various work needs..
  • Solid Construction: The Screw remover kit parts are precisely machined, and made of high-hardness chrome-molybdenum steel. Reverse spiral groove design bending down to provide maximum grip force to easily remove damaged bolts, nuts, and broken screws. The drill bits is made of HHS and the head is designed with a 135° angle. which is not easily worn and has strong penetration. Surface titanium nitride coating, effective anti-corrosion and rust prevention, extending service life..
  • Reverse Spiral Screw Extractors：Reverse spiral cutting cone extractors are designed to be driven into the head of a damaged bolt if its head is no longer usable and a wrench doesn’t “bite” it. The inside edges of the extractors ar....
Check Stock

Left Hand Drill Bit Set (10 pc, Silver & Gold), Metal Extractor Bits to Remove Stripped Broken Screws & Bolts w/Iron Storage Case by Mata1

  • HEAVY DUTY REMOVAL SET – These left-handed reverse twist extractors are USA-designed with clean steel technology, HSS strength & high HRC hardness.
  • Suitable for removing hardened, damaged, rusted & painted-over screws or bolts.
  • HARD & TOUGH – The hex shank extraction bits range in diameter from 3/32″ to 5/8″, while the lefthand drill bits range in diameter from 5/64″ to 19/64″ with 118-degree split points for high-speed drilling.
  • CARRY CASE – Ideal tool box to organize & hold the remover drill bits for any craftsman, dad, husband, boyfriend, or wife.
  • DRILL & REMOVE – Select bit size appropriate to the damaged screw/bolt.
  • Insert left-hand drill bit into drill & set drill to reverse.
  • Drill a hole about 1/16” deep into the screw/bolt.
  • Select corresponding extractor & use a mallet/hammer to pound it into the screw/bolt.
  • Use drill, wrench, or tap handle to thread the screw bolt out.
  • HANDY GADGETS – Mata1 is committed to provide lasting quality tools.
  • Mata1 reversible drill bit sets provide an assortment of sizes for removal of stuck bolts & screws.
Check Stock

POROHOM 12 PCS Trampoline Screws, Long Screw Trampoline Replacement Parts,Anti-Loose Trampoline Bolts and Nuts,Trampoline Accessories Trampoline Stability Tool- 3 in

  • Application: The trampoline screws are compatible with many different trampoline brands. The installation of long screws on the trampoline can make the trampoline more stable and not easy to shake..
  • Package Includes: 12 x Trampoline Screws, 1 x open wrench. Important note, Nylon lock nuts are used in our trampoline screws kits, and Nylon Lock Nuts Use the matching wrench to tool to screw in..
  • Nylon Insert Lock Nuts are also known as stop nuts. Lock nuts are used for fastening to a bolt when mechanically joining materials together. The bolt threads into the nylon material are located at the top of the nut. The purpose of the nylon insert is to prevent backing off or loosening from vibration..
  • Compared with the bolt heads of other brands of trampoline screws, the square shoulder underneath the rounded head is unique because this design can resist rotation when the nut is removed or tightened..
  • Wide Range Of Uses:The 12-piece bolt and nut set can be widely used in trampolines, cribs, bunk beds, chairs, cabinets, workbenches and other furniture.
  • it can also be well connected to wood, headboards and cabinets..
Check Stock

Stinky John's Tall Toilet Bolt Caps- VARIETY PACK- both bolt diameters

  • Not sure of bolt size? Get both sizes! No more awkward bolt cutting.
  • Includes a set of caps for 1/4 inch and a set of 5/16 inch threaded bolts.
  • Stinky John Tall Toilet bolt caps are paintable! Match your colored toilet.
  • Instead of cutting the bolts, simply screw on Stinky John's bolt caps.
  • No more unsightly loose fitting caps. Screws on, stays on tall bolts!.
Check Stock

Luckyway 10-Piece Screw Extractor and Left Hand Drill Bit Set, Bolt Extractors, for Removing Broken Studs, Bolts, Socket Screws, and Fittings

  • DIMENSIONS - 5pcs HSS left hand drill bits and 5 alloy steel bolt extractor. Screw extractors include 1#, 2#, 3#, 4#, 5#. Left hand drill models include 1/8", 5/32", 3/16", 1/4", 19/64".With a portable storage case that provides excellent protection and against lost screw extractors..
  • APPLICATION - Damaged Screw Extractor Set Designed to remove broken screws, studs, bolts and other fittings effectively..
  • MATERIAL - Made of durable hardened steel and tempered twice for extra hardness, promising you a long lasting screw extractor tool of rugged material and outstanding performance..
  • FEATURES - Spiral flutes are designed to embed themselves deeper into the metal as you turn the tool, so as the fastener resistance increases, the extractor's grip increases.A musthave tool for carpenters, handymen, contractors, construction workers or DIY enthusiasts alike! Get rid of stripped, obnoxious screws in seconds! Even the most rusted, worndown, and embedded screws are no match for this handy remover kit..
  • HOW TO USE - A broken bolt or screw may be removed from a hole wi....
Check Stock

Rugged Mount with Audio/Power Cable with M8 Motorcycle Mount for Garmin Montana 600/610 / 650 / 650t / 680 / 680t

  • Audio/Power Cable. Cable with bare power/audio/data wires..
  • 1" / 25mm socket adapter fits mororcycle mount bases using a 25mm/1 inch attachment system..
  • Montana 600 Montana 610 Montana 650 Montana 650t Montana 680 Montana 680t.
  • Base includes 3 size of M8 bolts are supplied 1 x 55mm M8 screw bolt x 60mm M8 screw bolt 1 x 65mm M8 screw bolt.
Check Stock

Motorcycle Fairing Bolt Kit, 177pcs M5 M6 Motorcycle Windscreen Screws, Aluminum Fasteners Fairing Bolts Nut Clips Kit, Mounting Kits Washers Nuts Screws Assortment for Sport Bikes (Blue)

  • 【Perfect Replacement】: This is a cool fairing bolt replacement accessory that will give your motorcycle a whole new stylish look when you decorate it with colored screws. Our bolt kits include 177 screw shapes to meet your different screw mounting needs. Sufficient quantity can meet different installation needs, making your motorcycle cooler and more perfect in details..
  • 【High Quality】: Our bolt kits are made of high-quality aluminum, are extremely strong and durable, and have a long-lasting shine. High-quality aluminum screws is rustproof, and anodized surfaces prevent them from corrosion. Nine colors are available, and you can match them to your motorcycles to make them a little cooler..
  • 【Wide Range of Application】: This is a motorcycle replacement part, the accessories of the body bolt kit are designed in standard size, basically suitable for most sports motorcycles on the market, so that your motorcycle catches people's attention in details. This kit will fit most motorcycles, but it's better to check if the size is right before buying..
  • 【Easy to Use】: Motorcycle windshield screw kits include screws in different shapes, one bolt kit can meet all your needs and can be used for decoration, upper fairing, windshield, fenders, fuel ....
Check Stock

Motorcycle Fairing Bolt Kit, 177pcs M5 M6 Motorcycle Windscreen Screws, Aluminum Fasteners Fairing Bolts Nut Clips Kit, Mounting Kits Washers Nuts Screws Assortment for Sport Bikes (Silver)

  • 【Perfect Replacement】: This is a cool fairing bolt replacement accessory that will give your motorcycle a whole new stylish look when you decorate it with colored screws. Our bolt kits include 177 screw shapes to meet your different screw mounting needs. Sufficient quantity can meet different installation needs, making your motorcycle cooler and more perfect in details..
  • 【High Quality】: Our bolt kits are made of high-quality aluminum, are extremely strong and durable, and have a long-lasting shine. High-quality aluminum screws is rustproof, and anodized surfaces prevent them from corrosion. Nine colors are available, and you can match them to your motorcycles to make them a little cooler..
  • 【Wide Range of Application】: This is a motorcycle replacement part, the accessories of the body bolt kit are designed in standard size, basically suitable for most sports motorcycles on the market, so that your motorcycle catches people's attention in details. This kit will fit most motorcycles, but it's better to check if the size is right before buying..
  • 【Easy to Use】: Motorcycle windshield screw kits incl....
Check Stock