WingTite Pro-Series Shower Drain, Builders Model for New Construction, Installs Entirely from the Top, Chrome

  • PROFESSIONAL CHOICE - The plumbing professional’s choice for new construction and remodels.
  • INSTALLS IN MINUTES - Fits 2” ABS pipe and 2” PVC pipe - No below access needed.
  • UNIFORM PLUMBING CODE APPROVED - UPC Approved for residential, commercial and facility applications.
  • PATENTED DESIGN - Designed for fiberglass and plastic showers including acrylic, cultured marble and composites.
  • MADE IN AMERICA - Proudly made in the USA with a 100% Lifetime Manufacture Guarantee.
Check Stock

K-2500 Single Serve Commercial Coffee Maker For Keurig K-Cups

  • Brew a fresh, robust cup of coffee with this Keurig K-2500 Single-Serve Commercial Coffeemaker. Ideal for medium- to large-sized businesses, the coffeemaker comes with direct water line plumbing connection that allows easy refilling, so your employees and visitors can easily brew a flavorful cup to enjoy..
  • Coffeemaker enabled with direct water line plumbing connection ( Plumbing kit sold separetly )..
Check Stock

SharkBite U860O300 Oxygen Barrier PEX Pipe 1/2 Inch, Orange Heat Radi, 300 foot coil

  • PEX RADIANT TUBING: Flexible oxygen barrier pipe tubing for radiant floor and hydronic heating applications.
  • Minimum working temperature 33 degrees Fahrenheit at 160 PSI and maximum working temperature 200 degrees Fahrenheit at 80 PSI.
  • FLEXIBLE PEX PIPE: Expands and contracts with temperature changes and is freeze resistant.
  • PUSH-TO-CONNECT: Use with SharkBite plumbing fittings or plastic barb and brass barb fittings using PEX crimp tool or clamp connections.
  • RESIDENTIAL and COMMERCIAL: All SharkBite PEX tubing meets the same standards for commercial and residential plumbing applications.
  • MADE IN THE USA: Manufactured and tested in the USA.
Check Stock

SharkBite U3088FLEX18LF Flexible Water Heater Connector, 3/4-Inch x 3/4-Inch x 18-Inch length

  • INSTALLS IN SECONDS: Water hose connectors require no special tools, no soldering, or glue. Just push to create a watertight seal.
  • COPPER, PEX, CPVC or PE-RT: SharkBite water heater plumbing fittings fit OD controlled copper, PEX, CPVC and PE-RT. Use for both hot and cold water supply lines.
  • QUALITY: Only SharkBite’s quality and performance is field-proven with more than 550 million connections. SharkBite is the only push-to-connect brand than can ensure a clean, leak-free connection.
  • CERTIFIED: SharkBite fittings are certified to 200 PSI and 200°F and can be reused up to four times.
  • RESIDENTIAL and COMMERCIAL: SharkBite Water Heater Supply Connectors meet the same standards for commercial and residential plumbing applications. Inspector friendly for a peace of mind..
Check Stock

SharkBite 1/2 Inch Disconnect Tongs for Push to Connect Brass Plumbing Fittings, U711

  • SHARKBITE REMOVAL TOOL: 1/2 inch disconnect tongs allow for brass push connect fittings to be disconnected from the pipe quickly and easily.
  • can remove or adjust push to connect fittings in tight spaces for easy disassembly.
  • COPPER, PEX, CPVC, CTS, HDPE: SharkBite disconnect tong is compatible with copper tubing, CTS, CPVC, HDPE, and PEX fittings, and connects all three types in any combination, ideal for working in tight work spaces.
  • DURABLE AND HIGH QUALITY: Fitting remover is made with durable stainless steel and wide grip handles by a name you know and trust.
  • SharkBite's quality and performance are field-proven and trusted in the plumbing industry.
  • PREFERRED BY THE PRO: SharkBite tools and fittings meet the same high standards for commercial and residential plumbing applications, combining durability and ease of use suitable for commercial repairs or home improvement projects.
  • MADE IN THE USA: All SharkBite valves, clips, joints, and adapters are manufactured and tested in the USA.
Check Stock

SharkBite 1/2 Inch Disconnect Clip for Push to Connect Brass Plumbing Fittings, U710A

  • SHARKBITE DISCONNECT CLIP: 1/2 inch disconnect clips allow for universal brass push connect fittings to be disconnected from the pipe quickly and easily.
  • can remove or adjust push to connect fittings with no tools, crimping, glue or soldering required.
  • COPPER, PEX, CPVC, CTS, HDPE: SharkBite disconnect clip is compatible with copper tubing, CTS, CPVC, HDPE, and PEX fittings, and connects all three types in any combination, ideal for working in tight work spaces.
  • DURABLE AND HIGH QUALITY: Fitting remover is made of durable and lightweight plastic with wide grip handles by a name you know and trust.
  • SharkBite's quality and performance are field-proven and trusted in the plumbing industry.
  • PREFERRED BY THE PRO: SharkBite tools and fittings meet the same high standards for commercial and residential plumbing applications, combining durability and ease of use suitable for commercial repairs or home improvement projects.
  • MADE IN THE USA: All SharkBite valves, clips, joints, and adapters are manufactured and tested in the USA.
Check Stock

AmazonCommercial Plunger - 2-Pack

  • 2-pack of multipurpose plungers for unclogging sinks, bathtubs, and showers.
  • Durable thermoplastic rubber plunger head and sturdy polypropylene handle.
  • Generates powerful suction force to dislodge clogs from plumbing traps and pipes.
  • Slim design is easy to store in a janitorial closet or cabinet.
  • Ideal for both commercial and residential environments.
Check Stock

DICKHEADS WITH TOILET PLUNGERS [Explicit]

  • 2-pack of multipurpose plungers for unclogging sinks, bathtubs, and showers.
  • Durable thermoplastic rubber plunger head and sturdy polypropylene handle.
  • Generates powerful suction force to dislodge clogs from plumbing traps and pipes.
  • Slim design is easy to store in a janitorial closet or cabinet.
  • Ideal for both commercial and residential environments.
Check Stock

Speakman SE-4400 GravityFlo 9-Gallon Portable Emergency Eyewash

  • PORTABLE DESIGN: Provide an emergency eyewash anywhere it’s needed, even where no plumbing exists. Compact eye wash station allows the eye washer to be moved and stored easily..
  • MOUNT ANYWHERe: The eye wash safety solution kit’s unique activation tray allows you to mount the unit on a wall, table, shelf or even the tailgate of a truck..
  • AFFORDABLE COMPLIANCE: The eye washing station allows users with even the tightest safety budgets to comply with OSHA and ANSI/ISEA Z358.1 eye wash requirements and a full 15 mins of eye flushing..
  • TEPID WATER: When located in a facility where ambient temperatures are between 60 °F and 100 °F, the safety kit will meet the ANSI/ISEA Z358.1 tepid water requirement – no sink or faucet required..
  • SPEAKMAN PLUMBING: From commercial plumbers’ supplies to bathroom accessories to fall in love with, Speakman delivers quality, innovation and performance with every product..
Check Stock

SharkBite U714A Disconnect Clip, Push-to-Connect Fittings, SharkBite Fitting Removal Tool, 1 Inch

  • REMOVES IN SECONDS: 1 Inch disconnect clip removes push to connect fittings requiring no special tools, no soldering, no crimping or glue. Just use the disconnect clip to make any adjustmentsREMOVES IN SECONDS: 1/4 inch disconnect clip removes push to connect fittings requiring no special tools, no soldering, no crimping or glue. Just use the disconnect clip to make any adjustments.
  • COPPER, PEX, CPVC: SharkBite disconnect clip removes plumbing fittings that fit copper tubing, and CTS CPVC and PEX and connects all three types in any combination.
  • QUALITY: Only SharkBite’s quality and performance is field-proven and is the only push-to-connect brand that can ensure a clean, leak-free connection.
  • RESIDENTIAL and COMMERCIAL: All SharkBite PEX tubing and silicone wrap meets the same standards for commercial and residential plumbing applications.
  • MADE IN THE USA: Manufactured and tested in the USA.
Check Stock

SharkBite 1 Inch PVC x 3/4 Inch CTS Ball Valve Push to Connect Brass Plumbing Fitting PEX Pipe Copper CPVC PE-RT HDPE 25551LF

  • INSTALLS IN SECONDS: Requires no special tools, no soldering, no crimping or glue.
  • COPPER, PEX, CPVC, PE-RT: SharkBite Ball Valve plumbing fittings fit Copper, PEX, CPVC, HDPE, and PE-RT Pipe and connects them in any combination.
  • PERFORMANCE: SharkBite fittings are certified to 200 PSI and 200 degrees Fahrenheit and can be reused up to 4 times.
  • QUALITY: Only SharkBite's quality and performance is field-proven with more than 550 million connections.
  • SharkBite is the only push-to-connect brand....
  • RESIDENTIAL and COMMERCIAL: All SharkBite fittings meet the same standards for commercial and residential plumbing applications.
Check Stock

Roto-Rooter Build Up Remover

  • PROFESSIONAL STRENGTH Grease Trap Cleaner and Commercial drain opener..
  • SAVE MONEY & REPAIRS with GET SERIOUS Grease trap Treatment..
  • COMMERCIAL DRAIN CLEANER for slow draining sinks and lines. Keeps Grease Traps & Drains Flowing.
  • ENZYME DRAIN OPENER cleans the pipes before the grease trap, grease trap & pipes leaving the trap..
  • ELIMINATES OFFENSIVE ODORS Safe on Pipes & Plumbing..
Check Stock

SharkBite 3/8 Inch to 1 Inch Pro Push to Connect Disconnect Tool, PEX Pipe, Copper, CPVC, PE-RT, HDPE, PROD3810

  • SHARKBITE PRO PUSH-TO-CONNECT DISCONNECT TOOL: This SharkBite pro disconnect tool allows for brass plumbing fittings to be disconnected from the pipe quickly and easily.
  • can remove or adjust push-to-connect fittings in tight spaces for easy disassembly.
  • EASY TO USE: This handy disconnect tool can remove any type of fitting from 3/8 inch to 1 inch.
  • does not require any installation or interchangeable faceplates to allow for comfortable and convenient use.
  • DURABLE AND HIGH QUALITY: Pex ring removal tool features comfortable rubber grips and is constructed with heavy-duty handle springs for optimal durability.
  • PREFERRED BY THE PRO: SharkBite tools and fittings meet the same high standards for commercial and residential plumbing applications, combining durability and ease of use.
  • suitable for commercial repairs or home improvement projects.
  • MADE IN THE USA: All SharkBite valves, clips, joints, and adapters are manufactured and tested in the USA.
Check Stock