Categories

Best Bora Saw Guide

LED Lighting Set for Infinity Gauntlet 76191 Collectible Building DIY Light Kit Compatible with Lego Thanos Right Hand Gauntlet Model with RGB Remote Control Lights Without Blocks

  • PRECISE RIP CUTS AND CROSSCUTS: Get straight accurate rip cuts and crosscuts up to 24 inches (610mm) wide on the sheet material you are breaking down..
  • REPEATABLE ACCURACY: The Bora Rip guide allows you to make repetitive rip cuts and crosscuts, while improving your accuracy and saving you time..
  • SAVE TIME: The Rip Guide by BORA will eliminate the need for marking and measuring each cut. Lock in your measurement and saw for accurate cuts every....
  • EASY SETUP: Three simple steps and your Rip Guide is set up! The Saw Plate stop allows you to quickly setup your saw every time..
  • STABILITY: Large ergonomic Rip Guide handle ensures a solid grip. The aluminum rail attaches securely to the Saw Plate for confident cuts..
Check Stock

Bora 36 Wtx Modular Clamp Edge w/ruler 545036

  • Made of heavy-gauge, extruded aluminum for extreme durability.
  • Adjustable clamp end slides easily up and down saw guide to fit material to be cut.
  • Locking handle grabs work surfaces for a secure edge that won't budge.
  • Ruled extrusion allows for easy measurements.
  • Fits with the Bora router guide, saw guide, and jig saw guide.
  • Cut a wide variety of angles with the WTX Track Clamps.
  • Easy to increase length with extension accessories.
Check Stock

Bora 24 WTX Modular Clamp Edge w/ruler 545024

  • Made of heavy-gauge, extruded aluminum for extreme durability.
  • Adjustable clamp end slides easily up and down saw guide to fit material to be cut.
  • Locking handle grabs work surfaces for a secure edge that won't budge.
  • Ruled extrusion allows for easy measurements.
  • Fits with the Bora router guide, saw guide, and jig saw guide.
  • Cut a wide variety of angles with the WTX Track Clamps.
  • Easy to increase length with extension accessories.
Check Stock

Bora 50” Ruled WTX Clamp Edge Extension for WTX Clamp Edge Saw Guide for Woodworking Contractors Carpenters and DIY 50 inch Extension 545060

  • COMPATIBLE WITH BORA WTX CLAMP EDGE: The WTX Extension is designed specifically to work with the Bora WTX Clamp Edge Saw Guides.
  • EXTEND YOUR CUTTING CAPACITY: With the 50 inch WTX Clamp Edge Extension you will get another 50 inches of cutting capacity to add to any length Bora....
  • GET IT STRAIGHT EVERY TIME: This rigid aluminum guide extension is a must-have accessory for keeping your cutting on track. It’s 50-inch length....
  • MAKE MEASURING EASY: A ruled edge with both metric and imperial measurements make your job of getting perfect cuts quick and easy.
Check Stock

Bora WTX Clamp Edge and Straight Cut Guide for Circular Saws | 50 Inch Cutting Length, 543050

  • GET IT STRAIGHT – This rigid aluminum guide rail is a must-have accessory for keeping your cutting on track. Its long 50in length allows you to saw with precision and skill..
  • CONTRACTOR’S COMPANION - This tool is made for use with the Bora WTX Saw Plate (sold separately), and can be conveniently paired with your own circular saws, routers, jig saws, and other power tools..
  • LOCKED IN - The adjustable clamp end slides up and down the saw guide to fit any material being cut, especially sheets of plywood. The locking handle grabs surfaces for a secure edge that won't budge..
  • AS LONG AS YOU NEED – Modular design allows for additional extrusions to be added which can expand the guide up to 100 inches. With the WTX clamping edge, you’ll save time and eliminate waste due to crooked, uneven cuts..
Check Stock

Bora 100” WTX Ruled Clamp Edge Saw Guide for Woodworking Contractors Carpenters and DIY Guide for Circular Saws 100 Inch Cutting Length 545100

  • Get It Straight Every Time: This rigid aluminum guide rail is a must-have accessory for keeping your cutting on track. It’s long 100-inch length....
  • Locked In: The adjustable clamp end slides up and down the saw guide to fit any material being cut, especially sheets of plywood. The locking handle....
  • Make Measuring Easy: The WTX Clamp Edge has a ruled edge with both metric and imperial measurements to make your job of getting perfect cuts quick and....
  • Suited For Your Needs: The modular design allows for additional extensions to be added to expand your cutting length up to 100 inches. With the WTX....
  • Additional Accessories: The BORA WTX Saw Guide System has additional accessories including the Saw Plate, Track Clamps for cutting any angle, and the....
Check Stock

Bora Jigsaw Guide For WTX or NGX Clamp Edge Use for making Straight Cuts & As A Steady Guide for your Jigsaw -542009

  • Made for jigsaws - this jigsaw guide is specifically designed to fit most jigsaws.
  • Easy to use - the jigsaw guide attaches easily to the Bora clamp edge, and your Jigsaw seamlessly fits into it, allowing for precise straight cuts.
  • Solid design - With two "tongue and groove" Points that slide into the Bora clamp Edge's side grooves, it's a firm, steady guide for your Jigsaw.
  • Fully adjustable - the sliding side points and locking screw allow it to accommodate almost any size Jigsaw. Adjustable pointer guide keeps cuts true.
  • An ideal woodworking accessory – made to use with our Bora Clamp edge range to help you achieve straight cuts with your Jigsaw.
Check Stock

BORA 5-Piece NGX Clamp Edge System Set for Making Precision Cuts Includes 50-inch Clamp Edge 50-inch Extension Pro Saw Plate Track Clamps Non-Chip Strip 544500

  • Track Saw Precision: Making straight cuts with a circular saw, router, or jigsaw is a challenging task, but with the BORA 5-PC NGX Clamp Edge System it is quick and easy to break down sheet material and rip boards with clean, accurate cuts every time.
  • 100” of Cutting Capacity: The NGX 50” Clamp Edge is made of heavy-gauge, extruded aluminum that clamps tightly on everything from plywood to dimensional lumber. And for big projects, like a rip cut on a 4x8, increase the length up to 100 inches with the NGX 50” aluminum extension..
  • Stop the Guesswork: Effortlessly attach the NGX Saw Plate to your right- or left-handed saw with the adjustable quick-release clamps. A fixed center molded channel helps reduce blade offset and the aluminum guide rails position your saw to make precision cuts..
  • Reduce Tear Out: Prevent top edge tear-out and splintering with two rolls of 55-inch Self-Adhesive Non-Chip Strip. Attach it to the bottom of the NGX Clamp Edge for a smooth finish.
Check Stock

Skye Women s Underwire Bikini Top Swimsuit Bora Bora black Floral DD-Cup

  • The 2-way back also enables you to customize your fit for the ultimate amount of support.
  • Removable soft cups for added comfort and shape.
  • Click "size chart" Above to consult our fit guide to determine which size will fit you best.
  • Click our logo above to visit our store page and view the bora bora hilary bikini top and other styles within the bora bora collection!.
Check Stock

BORA WTX Ruled Clamp Edge Saw Guide 50 Inch Length Rail for Circular Saws Cutting Track for Woodworking Contractors DIY 545050

  • Time Saver: The BORA WTX Ruled Clamp Edge Saw Guide makes it quick and easy to achieve straight, precise cuts when cutting plywood sheets or MDF with....
  • Fast Set-Up: Adjust the gripping clamp end to the desired length, lock it in place, and start cutting.
  • Long Cutting Length: This 50” guide rail is long enough for large and wide sheet material and can be used with all types of saws. Easily increase....
  • Ruled Straight Edge: The top edge of the clamp includes a ruler imprint with both metric and imperial measurements to guarantee your cuts are always....
  • Extreme Durability: Made of heavy-gauge, extruded aluminum, it is rigid enough to resist bowing and hold a straight edge, and durable enough to....
Check Stock

BORA PM-4004 Wheel Kit for BORA PM-4000 Miter Saw Stand stand not included

  • Kits includes two 6-inch wheels and hardware.
  • Increases the portability of your Bora PM-4000 miter saw stand.
  • No drilling required - easily snap and secure the wheels to your existing miter saw stand.
  • Wheel Kit helps you maneuver across the job site without having to fold up your stand, saving you critical time and energy.
Check Stock

BORA Portamate PM-4000 - Heavy Duty Folding Miter Saw Stand with Quick Attach Tool Mounting Bars

  • A cut above - The Bora Portamate PM-4000 is the best, most practical, hassle-free stand you’ll find for miter saws or chop saws. Constructed of....
  • Cut out for convenience - setup is quick and simple, as the folding legs swing Under the center portion and are secured by pins that snap into....
  • Switch gears & mount add tools - quick-attach saw mounts allow for easy mounting of your saw, as well as other tools which you can switch around, set....
  • Makes the cut – our PM-4000 saw stand was specially designed to provide the ideal ergonomic working height of 36 inches, so professional contractors....
  • Any way you cut it – Buy with confidence knowing that you are backed by our 1-year . If for any reason, you're not 100% satisfied with your....
Check Stock

Bora Portamate Speedhorse Sawhorse - Single Piece Table Stand with Folding Legs Metal Top for 2x4 Heavy Duty Pro Bench Saw Horse for Woodworking Carpenters Contractors PM-4500

  • 1.6 SECOND SET-UP: The Bora Portamate Speedhorse is the only sawhorse on the market with lever quick-release deploy technology, offering instant setup....
  • BEST-IN-CLASS CAPACITY: Comes as a single stand that can support up to 1500 lbs, which is 200 lbs. more than the leading competitors. 30 inches tall....
  • NON-SEQUENTIAL LEG FOLDING: To tear down your worksite, just pull the levers on each end and fold the legs up. Unlike standard sawhorses, It doesn't....
  • LONGER, PRE-DRILLED TOP: The pre-drilled metal top allows you to screw in 2x4's as makeshift brackets to a worktop. This prolongs the life of your....
  • AWARD WINNING SAW HORSE: The Bora Portamate Speedhorse is Winner of the 2019 Pro Tool Innovation Award in the Sawhorses & Tables category. Buy the....
Check Stock