Categories

Best Bora Saw Plate

BORA 50” NGX Clamp Edge Straight Cut Guide for Circular Saws Easy to Use Great for Cross-Cutting Plywood Sheets and Routing Dados 544050

  • Circular Saw Guide For Large Sheets: The Bora Clamp Edge is an ideal accessory for accurately cutting wide boards and pieces of plywood that are too big for a table saw.
  • Clamps Firmly: This straight edge guide has a wide rubberized clamp face to ensure a tight non-slip grip that won’t leave indentations and is easily adjustable to meet the length of your project.
  • Extreme Durability: Made of heavy-gauge, extruded aluminum, it is rigid enough to resist bowing and hold a straight edge, and durable enough to withstand repeated use.
  • Use With Any Circular Saw: This guide is compatible with any brand of circular saw, not just Bora Tools. Use it with circular saws, routers, and jigsaws. For big projects, easily increase the length up to 100 in. by adding the Bora NGX 50-inch aluminum extension.
Check Stock

Bora WTX Clamp Edge and Straight Cut Guide for Circular Saws | 50 Inch Cutting Length, 543050

  • GET IT STRAIGHT – This rigid aluminum guide rail is a must-have accessory for keeping your cutting on track. Its long 50in length allows you to saw with precision and skill..
  • CONTRACTOR’S COMPANION - This tool is made for use with the Bora WTX Saw Plate (sold separately), and can be conveniently paired with your own circular saws, routers, jig saws, and other power tools..
  • LOCKED IN - The adjustable clamp end slides up and down the saw guide to fit any material being cut, especially sheets of plywood. The locking handle grabs surfaces for a secure edge that won't budge..
  • AS LONG AS YOU NEED – Modular design allows for additional extrusions to be added which can expand the guide up to 100 inches. With the WTX clamping edge, you’ll save time and eliminate waste due to crooked, uneven cuts..
Check Stock

Bora 100” WTX Ruled Clamp Edge Saw Guide for Woodworking Contractors Carpenters and DIY Guide for Circular Saws 100 Inch Cutting Length 545100

  • Get It Straight Every Time: This rigid aluminum guide rail is a must-have accessory for keeping your cutting on track. It’s long 100-inch length....
  • Locked In: The adjustable clamp end slides up and down the saw guide to fit any material being cut, especially sheets of plywood. The locking handle....
  • Make Measuring Easy: The WTX Clamp Edge has a ruled edge with both metric and imperial measurements to make your job of getting perfect cuts quick and....
  • Suited For Your Needs: The modular design allows for additional extensions to be added to expand your cutting length up to 100 inches. With the WTX....
  • Additional Accessories: The BORA WTX Saw Guide System has additional accessories including the Saw Plate, Track Clamps for cutting any angle, and the....
Check Stock

BORA 5-Piece NGX Clamp Edge System Set for Making Precision Cuts Includes 50-inch Clamp Edge 50-inch Extension Pro Saw Plate Track Clamps Non-Chip Strip 544500

  • Track Saw Precision: Making straight cuts with a circular saw, router, or jigsaw is a challenging task, but with the BORA 5-PC NGX Clamp Edge System it is quick and easy to break down sheet material and rip boards with clean, accurate cuts every time.
  • 100” of Cutting Capacity: The NGX 50” Clamp Edge is made of heavy-gauge, extruded aluminum that clamps tightly on everything from plywood to dimensional lumber. And for big projects, like a rip cut on a 4x8, increase the length up to 100 inches with the NGX 50” aluminum extension..
  • Stop the Guesswork: Effortlessly attach the NGX Saw Plate to your right- or left-handed saw with the adjustable quick-release clamps. A fixed center molded channel helps reduce blade offset and the aluminum guide rails position your saw to make precision cuts..
  • Reduce Tear Out: Prevent top edge tear-out and splintering with two rolls of 55-inch Self-Adhesive Non-Chip Strip. Attach it to the bottom of the NGX Clamp Edge for a smooth finish.
Check Stock

Bora 50” Ruled WTX Clamp Edge Extension for WTX Clamp Edge Saw Guide for Woodworking Contractors Carpenters and DIY 50 inch Extension 545060

  • COMPATIBLE WITH BORA WTX CLAMP EDGE: The WTX Extension is designed specifically to work with the Bora WTX Clamp Edge Saw Guides.
  • EXTEND YOUR CUTTING CAPACITY: With the 50 inch WTX Clamp Edge Extension you will get another 50 inches of cutting capacity to add to any length Bora....
  • GET IT STRAIGHT EVERY TIME: This rigid aluminum guide extension is a must-have accessory for keeping your cutting on track. It’s 50-inch length....
  • MAKE MEASURING EASY: A ruled edge with both metric and imperial measurements make your job of getting perfect cuts quick and easy.
Check Stock

Bora 36 Wtx Modular Clamp Edge w/ruler 545036

  • Made of heavy-gauge, extruded aluminum for extreme durability.
  • Adjustable clamp end slides easily up and down saw guide to fit material to be cut.
  • Locking handle grabs work surfaces for a secure edge that won't budge.
  • Ruled extrusion allows for easy measurements.
  • Fits with the Bora router guide, saw guide, and jig saw guide.
  • Cut a wide variety of angles with the WTX Track Clamps.
  • Easy to increase length with extension accessories.
Check Stock

Bora 24 WTX Modular Clamp Edge w/ruler 545024

  • Made of heavy-gauge, extruded aluminum for extreme durability.
  • Adjustable clamp end slides easily up and down saw guide to fit material to be cut.
  • Locking handle grabs work surfaces for a secure edge that won't budge.
  • Ruled extrusion allows for easy measurements.
  • Fits with the Bora router guide, saw guide, and jig saw guide.
  • Cut a wide variety of angles with the WTX Track Clamps.
  • Easy to increase length with extension accessories.
Check Stock

BORA PM-4004 Wheel Kit for BORA PM-4000 Miter Saw Stand stand not included

  • Kits includes two 6-inch wheels and hardware.
  • Increases the portability of your Bora PM-4000 miter saw stand.
  • No drilling required - easily snap and secure the wheels to your existing miter saw stand.
  • Wheel Kit helps you maneuver across the job site without having to fold up your stand, saving you critical time and energy.
Check Stock

BORA Portamate PM-4000 - Heavy Duty Folding Miter Saw Stand with Quick Attach Tool Mounting Bars

  • A cut above - The Bora Portamate PM-4000 is the best, most practical, hassle-free stand you’ll find for miter saws or chop saws. Constructed of....
  • Cut out for convenience - setup is quick and simple, as the folding legs swing Under the center portion and are secured by pins that snap into....
  • Switch gears & mount add tools - quick-attach saw mounts allow for easy mounting of your saw, as well as other tools which you can switch around, set....
  • Makes the cut – our PM-4000 saw stand was specially designed to provide the ideal ergonomic working height of 36 inches, so professional contractors....
  • Any way you cut it – Buy with confidence knowing that you are backed by our 1-year . If for any reason, you're not 100% satisfied with your....
Check Stock

Bora Portamate Speedhorse Sawhorse - Single Piece Table Stand with Folding Legs Metal Top for 2x4 Heavy Duty Pro Bench Saw Horse for Woodworking Carpenters Contractors PM-4500

  • 1.6 SECOND SET-UP: The Bora Portamate Speedhorse is the only sawhorse on the market with lever quick-release deploy technology, offering instant setup....
  • BEST-IN-CLASS CAPACITY: Comes as a single stand that can support up to 1500 lbs, which is 200 lbs. more than the leading competitors. 30 inches tall....
  • NON-SEQUENTIAL LEG FOLDING: To tear down your worksite, just pull the levers on each end and fold the legs up. Unlike standard sawhorses, It doesn't....
  • LONGER, PRE-DRILLED TOP: The pre-drilled metal top allows you to screw in 2x4's as makeshift brackets to a worktop. This prolongs the life of your....
  • AWARD WINNING SAW HORSE: The Bora Portamate Speedhorse is Winner of the 2019 Pro Tool Innovation Award in the Sawhorses & Tables category. Buy the....
Check Stock

Bora Portamate Speedhorse Sawhorse Pair– Two Pack Table Stand with Folding Legs Metal Top for 2x4 Heavy Duty Pro Bench Saw Horse for Woodworking Carpenters Contractors PM-4500T

  • SET-UP IN 1.6 SECONDS: The Bora Speedhorse is the only sawhorse on the market with lever quick-release deploy technology, offering instant setup and....
  • BEST-IN-CLASS CAPACITY: These sawhorses can support up to 1500 lbs each, which means a hefty 3000 lbs together! This is 200 lbs. more than the leading....
  • FAST TEAR DOWN: To tear down your worksite, just pull the levers on each end and fold the legs up. Unlike standard sawhorses, these have....
  • LONGER, PRE-DRILLED TOP: The pre-drilled metal top allows you to screw in 2x4's as makeshift brackets to a worktop. This prolongs the life of your....
  • AWARD WINNING SAW HORSE: The Bora Portamate Speedhorse is Winner of the 2019 Pro Tool Innovation Award in the Sawhorses & Tables category. Buy the....
Check Stock

Portamate Tool Mounts for Miter Saw Stands and Work Centers PM-7002

  • Attach and detach power tools and machines to tool stands quickly and easily.
  • Works with miter saws, routers, band saws, scroll saws, and many other power tools.
  • Mounts sit flat when not attached to stand and tools can be used on bench or other work surface.
  • Set of 2 power tool mounts work with most Bora Portamate miter saw stands.
Check Stock

Bora 543056K Circular Saw Plate and Straight Edge Guide System . The 50” Clamp Edge and Saw Sled That Allows For Straight, True Cuts

  • EVERYTHING YOU NEED FOR STRAIGHT CUTS – The 50” clamp edge adjusts to firmly clamp to both ends of your board/material, and the saw plate / saw sled easily attaches to your circular saw..
  • WORK TOGETHER FOR PRECISION – The saw guide (with your saw attached) slides right into the fastened clamp edge, and slides along it, ensuring your cuts are straight and true..
  • WORKS WITH ALMOST ANY MAKE/MODEL SAW – Works with most makes and model circular saw, both in right handed and left handed configuration..
  • EASY TO USE – The clamp edge easily attaches and de-attaches, and is made of high quality aluminum. The saw plate easily fastens tightly to your saw (for added versatility, your saw can still be used freehand with the saw plate on as well.).
Check Stock