Categories

Best Bore Cylinders

ProVision PV2 Flexible Fiberscope / Inspection Scope w/ 36 In Non-Obedient Cable

  • 【Scope of application】Cylinder honing tools are suitable for degreasing engine cylinders with diameters from 3/4 in to 2‑1 / 2 in and 1‑1 / 4 in to 3‑1 / 2 in. The manufacturer's part number is 88233.
  • 【Excellent performance】This tool can be used to remove carbon deposits and hot glaze in the cylinder bore. This special tool can be used for small-bore cylinders, such as motorcycles, brakes, and clutch cylinders, ideal for removing rust deposits in old renovations..
  • 【High quality】The cylinder honing three jaws are made of high-quality iron materials, high strength, high hardness, rust and resistance, not easy to wear and not easy to age, and are made of special technology to enhance their stability and performance to ensure excellent durability and long service life ..
  • 【Ergonomics design】The engine cylinder grindstone adopts ergonomics design, which can be comfortably held, effortless to use, easy to operate, labor-saving, and high-efficiency, bringing you a lot of convenience. Flexible shaft, easy to use, and automatic centering. The knurling wheel can adjust the spring pressure of the stone on the cylinder hole..
  • 【Use steps】Spray lubricant on the stone or cylinder hole. Set the whetstone on the drill bit, insert the engine whets....
Check Stock

8milelake Engine Cylinder Hone Deglazer 2 inches-7 inches Adjustable 3 inches Blade with 220 Grit Stones Piston Cylinder Hone

  • This Engine Cylinder Hone Deglazer is use to to deglaze the walls of cylinders in gasoline and diesel engines, help to remove the carbon, rust..
  • Constructed of premium steel and provide this Piston Honing Tool a good strength and durability, and the 220 grit stones are replaceable , easy to use....
  • It use for deglazing engine cylinders 2 inches to 7inches in diameter, with 3 pieces adjustable 3” stones. and fit for engine cylinders of....
  • Knurled wheel adjusts spring pressure of stones against cylinder bore, and fasten the screw down can add more spring pressure, turn the opposite to....
Check Stock

KUNTEC Engine Cylinder Hone Tool 2 -7 Adjustable Deglazer 3inch Blade 220 Grit Stones

  • Engine cylinder hone for deglazing engine cylinders 2-Inch to 7-Inch in diameter.
  • Durable flexible shaft for easy use and self-centering..
  • Knurled wheel adjusts spring pressure of stones against cylinder bore.
  • Cylinder Hone features 3 replaceable 3-Inch long 220 grit stones.
  • 220 grit stones enable faster and smoother removal of deposits and corrosion in engine, brake and all types of cylinders..
Check Stock

M MATI Front Left & Rear Brake Master Cylinder for Polaris Diesel 455 Sportsman 335 400 450 500 600 700 800 Trail Boss 325 Worker 335 500 Xplorer 400 2010238 1910301

  • Manufacturer Part # 2010238 1910301 Replacement Part# 2010196 2010233 1910684 2050078 2050072 1910790 1911113 1930899.
  • Fitment: Fit for Polaris Diesel 455 1999-2001▶Sportsman 335 1999-2000▶Sportsman 400 2001-2005▶Sportsman 450 2006▶Sportsman 500 1998-2006 (Except 6x6, X2, Touring Edition)▶Sportsman 600 2003-2005▶Sportsman 700 2002-2006 All Models and Sportsman 700 MV 2007▶Sportsman 800 2005-2006▶Trail Boss 325 2002▶Worker 335 1999▶Worker 500 1999 2001▶Xplorer 400 1999-2000.
  • Feature: Front Brake Master Cylinder 3/4 Bore, 19mm Piston, 10x1mm Banjo Bolt, fit 7/8 Handlebar.Rear Brake Master Cylinder 1/2 Bore, 12.7mm Piston, Mouting Hole 6.5mm Center Spacing 38mm, fit 3/8-24 brake hose.
  • Material: This is great substitute brake master cylinders for Polaris ATV.. Advanced materials, precision manufacture to make the brake master cylinders gt sufficient pressure and longer life..
  • Service:If there is any product problem within 1 year, please contact us to solve it for you.We provide product service..
Check Stock

ABN Brake Cylinder Hone – 1-1/8in 3 Stone Piston Honing Tool Cylinder Bore Hone with 3/4in to 2-1/2in Honing Range

  • ...SIER: Remove carbon, rust, and heat glaze deposits from your caliper and piston cylinder walls with the ABN | 1-1/8 Inch Cylinder Bore Honing Tool Small Engine Cylinder Hone Kit.
  • Compatible with your electric drills, simply lubricate with brake fluid and run at low speeds moving up and down the sides of your engine cylinders.
  • BUILT TO LAST: Constructed of premium metal materials provide this brake caliper hone tool with maximum strength, durability, and longevity.
  • The flexible shaft and spread-control tension nut allow faster cutting and maneuverability.
  • 3 stone design makes insertion easy by self-centering.
  • Stone sleeves add strength and protect your abrasive stones when not in use.
  • PERFECT SIZE FOR YOUR NEEDS: Rigid honing tools for a drill features 3 carbide stones that help you remove glaze build up on your brake cylinders.
  • 220 medium grit stones measure at 1-1/8 by 3/16 by 1/8 inches (2.8 by .5 by .3cm).
  • Square ends of stones make this small brake hone tool ideal for step-cut and blind-end cylinders.
  • ADJUSTABLE RANGE: Easily adjust the range and pressure placed against your cylinders for well-controlled tension and maximum effectiveness in creating a smoother, cleaner surface.
  • Spring and knurled adjusting nut increase tension and lock the drill hon....
Check Stock

12'' Dial Height Gage Black DIAL FACE Shockproof 8'' X 0.001'' Dial Height Gage

  • 【Compatibility】This cylinder honing tool has a wide range of applications, and meets or exceeds the original factory specifications, can be directly replaced to meet your various needs.Suitable for degreasing of engine cylinders with diameters of 3/4 in to 2‑1/2 in and 1‑1/4 in to 3‑1/2 in..
  • 【Adjustable】Adjustable tension screw, controls the spring pressure of stones against cylinder bore to meet different piston diameters. The self-aligning and flexible shaft ensures a smooth movement to get you a nice even hatch pattern bore..
  • 【Professional Tools】This cylinder honing tool has high accuracy and sensitivity,cylinderc Honing Tool is perfect to deglaze the walls of cylinders in gasoline and diesel engines. Idea for remove burrs and properly roughen the cylinder walls to produce an oil holding cross hatch pattern and provide an adequate seal..
  • 【High Quality Materials】This cylinder honing tool are made of high-quality iron material,no rust, and high strength for maximum durability.Manufactured according to strict quality control standards, the improved design can extend the service life..
  • 【Production Guarantee】From the purchase of original materials to the factory inspection of products, inspections must be carried out at every....
Check Stock

6434 Sleeve Height & Counter Bore Gauge for All Diesel Engines Range 0-1.00 Graduation 0.001 Reading 0-100

  • 【Wide Applications】 6434 1 in. Dial Indicator Sleeve Height and Counter Bore Gauge is compatible with all diesel engines with sleeved cylinders. Helps quick and easy to measure the cylinder sleeve height, counter bore depth, top dead center, piston-to-deck height, valve protrusion..
  • 【Precise Measurement】 Range: 0-1.00". Graduation: 0.001". Reading: 0-100. Easy readings around entire bore. 4374- Dial Indicator.
  • 【Perfect Design】 Pointed contact for measuring cylinder sleeve height. Flat end contact measures counter-bore depth. Compact and versatile gauge also measures top dead center, piston-to-deck height and valve protrusion. Easy to use, impossible to mess up..
  • 【Built to Last】 Made of real steel hardened, professional and quality. Heavier, stronger and more durable. Not so easy to be deformed, more shock-proof, professional quality and industrial use..
  • 【100% Satisfaction Guarantee】 Your satisfaction is our priority. We strive to give our customers excellent service. All Sixcow products support 30-Day money-back guarantee, 12-Month warranty for quality-related issues. Simply return it for your warranty..
Check Stock

Maxim TC Double Acting Hydraulic Tie Rod Cylinder - 2 Bore Hydraulic Cylinder - Tie-Rod Cylinder for Double Acting Applications - 2” Bore, 6” Stroke, 2500 PSI, 16.25'' Retracted - 3/8 NPT Ports

  • SPECIFICATIONS: Maxim’s hydraulic cylinders has a 2” bore with 1” pin, 1.125” rod with a maximum stroke length of 6,” 3/8 " NPT Ports with 2500 PSI and column load of 7850 lbs. It measures 16.25” when retracted and 22.25” when fully extended..
  • HEAVY-DUTY: With a maximum working pressure of 2500 PSI and column load capacity of 7850 lbs, this tie-rod cylinder for double acting applications is made for rugged agricultural applications that require reliable and consistent performance..
  • EASY TO USE: Our double acting hydraulic cylinder has a simple but compact design that can be easily installed and disassembled. These tie-rod hydraulic cylinders are manufactured per strict NFPA standards and are interchangeable..
  • VERSATILE: This double action hydraulic cylinder is adaptable - it comes in customizable bore sizes from 2” to 4” and stroke lengths from 4” to 48”. Although made for rugged agricultural use, the tie-rod cylinder can be used in exacting applications..
  • LONG LASTING: Made from top-grade ductile iron with hard-polished chrome plating, this 6 stroke hydraulic cylinder is equipped with Buna N O-ring and zinc seals. It is durable and not susceptible to damage from wear and tear..
Check Stock

EWK 1-1/4 to 3-1/2 Inch 3 Stones Engine Cylinder Hone Tool Adjustable Cylinder Deglazer Piston Honer 220 Grit

  • 【Perfect Honing】 EWK cylinder honing tool is perfect to deglaze the walls of cylinders in gasoline and diesel engines. Idea for remove burrs and....
  • 【Smooth Surface Deglazing】Fits 1-1/4" to 3-1/2" (31.75mm to 88.9mm) diameter brake caliper bores, engine cylinders of automotive, motorcycle and....
  • 【Highly Flexible】 Adjustable tension screw, controls the spring pressure of stones against cylinder bore to meet different piston diameters. The....
  • 【Durable & Long Lasting & Replaceable】 Made of premium steel, maximize the cylinder honing tool with extra strength and durability. The 220 grit....
  • 【 Excellent WorKing Experience】Durable products with 12+6 months warranty, reply within 24 hours, ship out within 24 hours to achieve fast....
Check Stock

52-646-300-0 Cylinder Dial Bore Gage 2“-6 Measuring Range .0005 Graduation 9.5 Measuring Depth with Carbide Anvils and Insulated Grip

  • Valuable Application -- Professional Cylinder Dial Bore Gage great for hobby machinists as well as mechanics, it is commonly used to measure many kind of automotive’s parts or cylinders and easily check for ovality or out of roundness. It can measure the interior diameter of a hole at any depth (within its reach), while internal micrometers can only measure to the depth of their contacts..
  • Technical Features -- Designed 2”-6” Measuring Range, 0.0005” Graduation, 9.5” Measuring Depth. Come with 2″ Contact Extension, 10 x Anvils (, 2.2", 2.4", 2.6", 2.8", 3", 3.2", 3.4", 3.6", 3.8", 4" ), 3 x different size Washers (0.1”, 0.05, 0.02”)Complete set -- The whole set include 1 x Dial Indicator, 1 x Chrome Plated Handle, 1 x Contact Extension, 3 x Washers, 10 x different size Anvils, all parts are collected in a fitted case.
Check Stock

Daisy Powerline 415 Pistol Air Gun Kit

  • 177 cal. BB Pistol with a smooth bore steel barrel.
  • Kit includes shooting glasses, targets, 350 ct. BB tube and three CO2 cylinders.
Check Stock

Kit King - Bobcat 6558847 Aftermarket Hydraulic Cylinder Seal Kit

  • Bobcat Equipment Type: Skid Steer Loaders & More.
  • Bobcat Equipment Models: 630, 631, 632, 642B, 643, 645, 653, 730, 731, 732, 741, 742, 742B, 743, 743B, 751, 753, 843, 843B, 853, 909 & More.
  • Typical Hydraulic Application: Tilt & More.
  • Cylinders: 6539810, 6559590, 6558782, 6591962, 6592084, 6593398 & More.
Check Stock

Cylinder Head Piston Gasket Set Fits Yamaha Banshee 350 YFZ350 1987-2006

  • Fits: Yamaha Banshee 350 YFZ350 (1987-2006).
  • Bore is 64.00mm x Stroke 54.00mm / Cylinder Displacement is 347cc / Compression 6.5:1.
  • This product includes Piston Kit, Gasket Kit, OE Type Cylinders and HEAD CYLINDER.
  • THIS ITEM HAS TO BE INSTALLED BY PROFESSIONAL MECHANICS SPECIALIZED IN ATV AND UTVs.
Check Stock